Franklin Electric 214589003S Submersible Pump Motor,1 Ph,1 HP, 230V, 4", 3wire, US $300.00 – Picture 0

Franklin Electric 214589003S Submersible Pump Motor,1 Ph,1 HP, 230V, 4", 3wire, US $300.00 – Picture 1

Franklin Electric 214589003S Submersible Pump Motor,1 Ph,1 HP, 230V, 4", 3wire, US $300.00 – Picture 2

Franklin Electric 214589003s Submersible Pump Motor,1 Ph,1 Hp, 230v, 4", 3wire

US $300.00

Folly Beach, South Carolina, United States
Feb 13th

Open on mobile:
QR code

Submersible Pump Motor, 1 Ph, 1 HP, 230V, 4 Inch, 3 Wire Brand new motor never used. Original packaging included. SPECS ITEM Submersible Pump Motor MOTOR TYPE Capacitor Start ENCLOSURE Totally Enclosed Non Ventilated HP 1 NAMEPLATE RPM 3450 VOLTAGE 230 PHASE 1 FULL LOAD AMPS 8.2 MAX. SF AMPS 9.8 HZ 60 SERVICE FACTOR 1.4 MAX. AMBIENT TEMP. 86 Degrees F THRUST RATING 650 lb. NUMBER OF WIRES 3 THERMAL PROTECTION Auto BEARINGS Sleeve ROTATION CCWSE DIA. 4" DIAPHRAGM TYPE Pressure Equalizing SHAFT MATERIAL Splined Stainless Steel SHELL MATERIAL Corrosion Resistant Stainless Steel STATOR TYPE Hermetically Sealed LEAD LENGTH 48" HEIGHT 11-3/4" RPM RANGE 2350 to 3600 STANDARDS UL Recognized (E79319), CSA Certified (LR9862), ANSI/NSF (MH18335/FDNP) UNSPSC 40151513 WEIGHT 23.800000 DESCRIPTION Submersible Pump Motor, Capacitor Start, 1 HP, 3450 Nameplate RPM, 230 Voltage, 1 Phase, Totally Enclosed Non Ventilated, Full Load Amps 8.2, 60 Hz, Auto Thermal Protection, 1.4 Service Factor, Bearings Sleeve, Max. Ambient Temp. 86 Degrees F, Rotation CCWSE, Dia. 4 In., Height 11-3/4 In., Number of Wires 3, Lead Length 48 In., Shaft Material Splined Stainless Steel, Shell Material Corrosion Resistant Stainless Steel RestrictionsThis item has been restricted from sale in the following countries: China 1-PhaseRecommended for water systems that utilize a pressure switch. Built-in lightning protection. Capacitor-start motors require a control box, sold separately on page 4105. Automatic thermal protection on motors up to 1 HP; manual (in control box) 1-1/2 HP and higher. All models are ANSI/NSF Certified (MH18335/FDNP). 1-Phase and 3-Phase 4" Submersible Pump Motors Stainless steel shell with encapsulated, hermetically sealed stator. Splined stainless steel shaft. Lubricant-replenishing, filtered check valve and pressure-equalizing diaphragm. Replaceable lead wire assemblies include ground wire. 1/2-HP to 2-HP models include 48" assembly; 3-HP to 5-HP models include 100" assembly. UL Recognized and CSA Certified. Bearings: hydrodynamic thrust Rotation: CCWSE Continuous duty in 86 F (30 C) water at 1/4 ft. per sec.

“Item is brand new, never used. Original packaging is opened but no damage to pump. It is completely new besides package being opened”