Fujikura Fsm-80s Fiber Optic Fusion Splicer Kit With Ct-30a Cleaver-brand New

US $7,700.00

Hong Kong, Hong Kong
Jan 29th

Open on mobile:
QR code

Fujikura FSM-80S Fusion Splicer Kit All Original / With CT-30 Cleaver Brand New With 12 Months Warranty Description The FSM-80S is core-to-core alignment single fiber splicer succeeding to FSM-60S. In addition to ruggedized concept, which 60S created, the 80S has a series of new features, such as "Automated wind-protector and tube-heater" for quicker splicing cycle as well as fewer operation steps, "innovative carrying-case design" for quicker preparation, "powerful Li-ion battey" for longer operation, high resolution bigger LCD monitor. Market is from backbone network installation to opto-electronics components production for quality splice. Applicable fibres SM (ITU-T G.652 & G.657), MM (ITU-T G.651),DS (ITU-T G.653), NZDS (ITU-T G.655),Others Fibre Count Single Cladding diameter 80 to 150?m Coating diameter 100 to 1000?m Fibre cleaved length 5 to 16mm using Sheath Clamp A, B or 5 to13mm using FH-60-250, FH-60-900 Actual average splice loss 0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS. Splice time 7sec:SM FAST mode, 12sec :SM AUTO mode, 15sec:AUTO mode Return loss 60dB or greater Splicing modes 100 splicer modes are available Splice loss estimate Several types of core deformations as well as core axis offset are taken into account for accurate loss estimate. Attenuation splice function Intentional high splice loss of 0.1dB to 15dB (0.01dB step) can be made for an inline fixed attenuator Storage of splice result The last 2000 results to be stored in the internal memory. Magnification X / Y (300X magnification), or both X and Y simultaneously (160X magnification) Viewing method By two CMOS cameras for intersecting fiber viewing and 4.73 inches TFT colour LCD monitor Tension test 1.96 to 2.25N Operating condition 0-5000m above sea level, 0-95% RH and -10 to 50°C respectively. Tube heater Built-in auto-start tube heater with 10 heating modes and up to 20 for reference Tube heat time 13-15sec. with FP-03 protection sleeve. Total memory of 30 heating modes are available Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves. No. of splice/heating with battery 200 times of splicing and heat shrinking under with BTR-09 Power supply Auto voltage selection from 100 to 240Va.c. or 10 to 15Vd.c. with ADC-18. 14.8Vd.c. with BTR-09 Terminals USB2.0 ( Mini-B) for data and video signal transfer to PC. Wind protection Up to 15m/s wind velocity Dimensions 146(W) x 159(D) x 150(H) mm Including wind protector, monitor, and rubber protector Excluding rubber foot Weight 2.5 kg, with ADC-18 AC adaptor 2.7 kg, with BTR-09 battery Electrode life 3000 arc-discharges Package: Fujikura FSM-80S Fusion Splicer Kit, Include the following: Item Description Model No. Qty 1 Fusion Splicer 80S with CLAMP-S70A 1 pc 2 AC adaptor/battery charger ADC-18 1 pc 3 AC power cord ACC-XX 1 pc 4 Spare Electrodes ELCT2-20A 1 pair 5 Cleaver CT-30A 1 pc 6 Battery Pack BTR-09 1 pc 7 USB cable USB-01 1 pc 8 Quick reference guide M-80S/19S-E 1 pc 9 Warning and cautions W-70-E 1 pc 10 Instruction Manual M-70 1 pc 11 Alcohol Pot AP-01 1 pc 12 Battery charge cord DCC-18 1 pc 13 Carrying Case CC-30 1 pc 14 Screw Driver SD-01 1pc carton size:61.5*35.5*38.5cm,12KG Warranty * 12 Months Warranty. * Payment to be returned if Customer is not satisfied with the product and Refund in 3 working days while received the returned product. Service We also have very good offer for: -Brand New Furukawa Fitel S178A V2 splicer Kit -Sumitomo Type Z1C splicer -Fujikrua FSM-60S splicer -Fujikrua FSM-60R Ribbon splicer -OTDR JDSU MTS-6000/4000/2000, -OTDR EXFO FTB-200V2 -OTDR Ando AQ7275, -Fiber Tool Kit, -Portable Optical Power Meter and Light source. Shipping Shipping to worldwide, Shipping cost around US$300.00 to worldwide from Hong Kong via UPS, FedEx, DHL and take 2~3 working days Payment Only acceptable forms of payment are PayPal. Contact information fonsuntekonline@gmail.com

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Fujikura
Country/Region of Manufacture	Japan
Model	80S