+ Post new Ad
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 0
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 1
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 2
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 3
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 0
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 1
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 2
Fully Soldered Heated Bed, Thermistor and Glass Top for Reprap 3D Printer, US $32.00 – Picture 3

Fully Soldered Heated Bed, Thermistor And Glass Top For Reprap 3d Printer

US $32.00

  • Columbus, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
Fully Soldered Reprap Heated Bed  USA SELLER! Pieces included: Soldered Thermisor 8.5 inch Heated Bed soldered with resistor and 2 LEDs(1) 3 Feet of Connection wire 4 adjusting screws with springs Fine tuning nuts to adjust print bed height. (8) Pre-Cut Printer Glass (1) 4 Clips required to hold the Glass to the bed For sale is an assembled heated bed for a Reprap 3D printer.  The item comes completely soldered with a resistor, 2 leds, and 3 feet of connection wire. The bed also comes with the required glass top that allows for easy adherence of prints and 4 clips that allow it to be attached to the bed.   Included are four screws with springs and tuning nuts to attach the bed and adjust its height at the four different corners for calibration.  Item usually ships out withing 2 days of purchase Please contact me with any questions before purchase.  

Directions

Similar products from Other Plastic Processing Tools

CubePro ABS Filament Cartridge - Silver

CubePro ABS Filament Cartridge - Silver

  • Dayton, Ohio, United States
  • Jan 30th
Brass 3d printer 0.4mm extruder nozzle print head hotend 1.75mm MK7 M6 Thread

Brass 3d printer 0.4mm extruder nozzle print head hotend 1.75mm MK7 M6 Thread

  • China, China
  • Jan 30th
Reprap Wilson TS 3D Printer Required Printed Parts Kit Plastic Parts Set- ABS

Reprap Wilson TS 3D Printer Required Printed Parts Kit Plastic Parts Set- ABS

  • ???, ???, China
  • Jan 30th
IBN HOT RUNNER Model 726 7336

IBN HOT RUNNER Model 726 7336

  • Morrisville, Pennsylvania, United States
  • Jan 30th
3D Systems Projet 3500 HD Max 3D Printer

3D Systems Projet 3500 HD Max 3D Printer

  • Noblesville, Indiana, United States
  • Jan 30th
Maguire Concentrate Feeder MCF-8-34 #60905

Maguire Concentrate Feeder MCF-8-34 #60905

  • Holly, Michigan, United States
  • Jan 30th
Conair Franklin Hopper Receiver SL15RRF65 #60311

Conair Franklin Hopper Receiver SL15RRF65 #60311

  • Holly, Michigan, United States
  • Jan 30th
Conair Franklin Hopper Receiver SL15RFF65R #60312

Conair Franklin Hopper Receiver SL15RFF65R #60312

  • Holly, Michigan, United States
  • Jan 30th
Reprap hobbed bolt M8, aprox 25.5 mm,for filament 3mm,(1 PC)

Reprap hobbed bolt M8, aprox 25.5 mm,for filament 3mm,(1 PC)

  • nesher, Israel
  • Jan 30th
Reprap hobbed bolt M8, aprox 24,1 mm,for filament 3mm or 1,75mm,(1 PC)

Reprap hobbed bolt M8, aprox 24,1 mm,for filament 3mm or 1,75mm,(1 PC)

  • nesher, Israel
  • Jan 30th
000922 O-Ring / Seal Rings Lot of 5

000922 O-Ring / Seal Rings Lot of 5

  • Huntsville, Alabama, United States
  • Jan 30th
3D Printer MBot 3D Plywood Kits Single Head DIY Ikea Style Assmbly Instructions

3D Printer MBot 3D Plywood Kits Single Head DIY Ikea Style Assmbly Instructions

  • Hangzhou, ???, China
  • Jan 30th
0.5mm 3D Printer Extruder Nozzle Print Head for Makerbot MK8 RepRap Copper DIY

0.5mm 3D Printer Extruder Nozzle Print Head for Makerbot MK8 RepRap Copper DIY

  • HK, Hong Kong
  • Jan 30th
0.2mm 3D Printer Extruder Nozzle Print Head for Makerbot MK8 RepRap Copper DIY

0.2mm 3D Printer Extruder Nozzle Print Head for Makerbot MK8 RepRap Copper DIY

  • HK, Hong Kong
  • Jan 30th
0.3mm 3D Printer Extruder Nozzle Print Head for Makerbot MK8 RepRap Brass DIY

0.3mm 3D Printer Extruder Nozzle Print Head for Makerbot MK8 RepRap Brass DIY

  • HK, Hong Kong
  • Jan 30th
RepRap M8 Stainless Steel Smooth Rods 8mm - for Prusa Mendel i3

RepRap M8 Stainless Steel Smooth Rods 8mm - for Prusa Mendel i3

  • Lisbon, Portugal
  • Jan 30th
Heater Cartridge 12 V 40 W OD6 x 20 mm for Reprap 3D printer

Heater Cartridge 12 V 40 W OD6 x 20 mm for Reprap 3D printer

  • Vordingborg, Sj, Denmark
  • Jan 30th
COMET THERMOFORM MACHINE WITH VACUUM TANK forming plastic ABS thermoforming

COMET THERMOFORM MACHINE WITH VACUUM TANK forming plastic ABS thermoforming

  • Francisco, Indiana, United States
  • Jan 30th
Davis Standard/Bolling 2.5" Plastic/EPDM/Resin Extruder

Davis Standard/Bolling 2.5" Plastic/EPDM/Resin Extruder

  • Akron, Ohio, United States
  • Jan 30th
3 D PRINTER EQUIPMENT

3 D PRINTER EQUIPMENT

  • Fair Oaks, California, United States
  • Jan 30th

People who viewed this item also vieved

Advantage 80 ton Outdoor Air Cooled Chiller * PACKAGED * with Pumps & Tank, 460V

Advantage 80 ton Outdoor Air Cooled Chiller * PACKAGED * with Pumps & Tank, 460V

  • Clinton, Massachusetts, United States
  • Jun 9th
3000W 31.5" Kanthal A1 Heating Element Coil Heater Wire Nunal

3000W 31.5" Kanthal A1 Heating Element Coil Heater Wire Nunal

  • SHIP TO WORLDWIDE, Hong Kong
  • Jun 9th
Equiplast EE631 Band Heater 8.5 x 3 Inch 230 Volt 1000 Watt

Equiplast EE631 Band Heater 8.5 x 3 Inch 230 Volt 1000 Watt

  • L'Ile-Bizard, Quebec, Canada
  • Jun 9th
NPE BA896 Band Heater 9.5 x 2.5 Inch 240 Volt 2 x 675 Watt (1350 watts)

NPE BA896 Band Heater 9.5 x 2.5 Inch 240 Volt 2 x 675 Watt (1350 watts)

  • L'Ile-Bizard, Quebec, Canada
  • Jun 9th
Generic Screw Tip 80 mm Scr924 Used #16924

Generic Screw Tip 80 mm Scr924 Used #16924

  • Holly, Michigan, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies