+ Post new Ad
Gang Rip Saw - Progressive Systems 31" Dip Chain Gang Rip Saw model #SB/D31, US $8700 – Picture 0
Gang Rip Saw - Progressive Systems 31" Dip Chain Gang Rip Saw model #SB/D31, US $8700 – Picture 0

Gang Rip Saw - Progressive Systems 31" Dip Chain Gang Rip Saw Model #sb/d31

US $8700

  • Milford, Delaware, United States
  • Jun 3rd
Open on mobile:
QR code
For sale is a PROGRESSIVE Systems SB/D-31 Dip Chain Gang Rip Saw with the following specs. and features: 31" cap. Arbor with pneumatic arbor lock 14"max diameter tooling 3.50"max. Motorized thickness adjustment 22" min length for glue joint accuracy 6" throat depth to fence side of blade (3) Included Saw Sleeves 31.50" saw sleeves with double key arranged for 3.125" bore size blades, lots of blades and extra spacers included as well Equipped with 75hp motor 3600 rpm tefc direct drive motor arbor with disc brake an load meter 3.1875"diameter turned ground and polished saw arbor with outboard bearing with motorized vertical adjustment of arbor Feed and chain 34" wide feed bed 5hp variable speed of 30-150 fpm with adjustable jam protection Dip Bed carried on 2.50" pitch hardened double v chain extruded structural aluminum feed bed slats with replace able safety orange polyurethane inserts oil mist lubricant for extended chain life Complete with: (2) infeed & (2) outfeed 4" diameter air loaded overhead pressure rolls full width air loaded laminated bed hold down plate at saw arbor with +/- .25" thickness variation with pressure adjustment pressure rolls & bed plate unit with manual height adjustment Anti kickback fingers system with 1 lower 2 upper on in feed 1 upper between feed roles and 1 upper assembly on out feed Original Owner's Manual included Standalone Blade Setup Stand included as well **This was over a $125,000 saw when new in 1997.  Why buy new when you can get the same functionality for much, much less!  Please call Jerry with any questions at the office at 302-422-3338 or on the cell at 302-922-0701. We can assist the buyer in lining up a freight carrier for shipping.  Thank You and Happy Bidding!

Directions

Similar products from Professional Sawing Equipment

20" x 13" DOALL "2013V" VERTICAL BAND SAW - #27759

20" x 13" DOALL "2013V" VERTICAL BAND SAW - #27759

  • Cincinnati, Ohio, United States
  • Jun 4th
Walker Turner Switch Box On/Off Switch Housing From Radial Saw *Part Only*SeePic

Walker Turner Switch Box On/Off Switch Housing From Radial Saw *Part Only*SeePic

  • Garwood, New Jersey, United States
  • Jun 4th
Walker Turner Radial Arm Drill/ Saw Ram Rear Stop *Part Pictured Only*

Walker Turner Radial Arm Drill/ Saw Ram Rear Stop *Part Pictured Only*

  • Garwood, New Jersey, United States
  • Jun 4th
Walker Turner Radial Arm Knob

Walker Turner Radial Arm Knob

  • Garwood, New Jersey, United States
  • Jun 4th
5 in. 7.5 Amp Double Cut Saw - Counter Rotating Blades - Laser Precision Cuts

5 in. 7.5 Amp Double Cut Saw - Counter Rotating Blades - Laser Precision Cuts

  • Middletown, New York, United States
  • Jun 4th
Table Saw Rockwell Unisaw 10" 2HP 3 Phase 230/460 volts

Table Saw Rockwell Unisaw 10" 2HP 3 Phase 230/460 volts

  • Tomball, Texas, United States
  • Jun 4th
RBI HAWK 220 VS SCROLL SAW free local pickup

RBI HAWK 220 VS SCROLL SAW free local pickup

  • Long Beach, California, United States
  • Jun 4th
Omga T-2005 OPT 4000 Optimizing Saw with Sorting System

Omga T-2005 OPT 4000 Optimizing Saw with Sorting System

  • Stone Mountain, Georgia, United States
  • Jun 3rd
DOALL 16" BANDSAW LHV 3PH 220V 122" Saw Length 60 Cycle

DOALL 16" BANDSAW LHV 3PH 220V 122" Saw Length 60 Cycle

  • Junction City, Kentucky, United States
  • Jun 3rd
Laguna Tools Italian LT37 Bandsaw 15 hp Baldor 24" Resaw

Laguna Tools Italian LT37 Bandsaw 15 hp Baldor 24" Resaw

  • Irvine, California, United States
  • Jun 3rd
OLIVER MODEL 2004 SLIDING TABLE SAW BEST IN THE BUSINESS!!

OLIVER MODEL 2004 SLIDING TABLE SAW BEST IN THE BUSINESS!!

  • Huntington Beach, California, United States
  • Jun 3rd
Jeweler Saw Frame 3" Adjustable French Style with 12 Blades Jewelry Hobby #71SF

Jeweler Saw Frame 3" Adjustable French Style with 12 Blades Jewelry Hobby #71SF

  • Copperas Cove, Texas, United States
  • Jun 3rd
NORTH AMERICAN VERTICAL BANDSAW (11269)

NORTH AMERICAN VERTICAL BANDSAW (11269)

  • North Branford, Connecticut, United States
  • Jun 3rd
Gang Rip Saw - Steton 12" Dip Chain Gang Rip Saw - model #SM 300

Gang Rip Saw - Steton 12" Dip Chain Gang Rip Saw - model #SM 300

  • Milford, Delaware, United States
  • Jun 3rd
ALTENDORF MODEL F 45 10' SLIDING TABLE PANEL SAW WITH SCORING BLADE

ALTENDORF MODEL F 45 10' SLIDING TABLE PANEL SAW WITH SCORING BLADE

  • Huntington Beach, California, United States
  • Jun 3rd
Delta 438010170085 Switch (33-892 Radial Arm Saw)

Delta 438010170085 Switch (33-892 Radial Arm Saw)

  • Utica, New York, United States
  • Jun 3rd
Porter Cable - Delta 889640 Switch (863 And 873 Drills)

Porter Cable - Delta 889640 Switch (863 And 873 Drills)

  • Utica, New York, United States
  • Jun 3rd
Delta 1313172 Brake Switch For 34-080 Mitre Saw

Delta 1313172 Brake Switch For 34-080 Mitre Saw

  • Utica, New York, United States
  • Jun 3rd
ANDO TA500 21" Commercial Band Saw with automated feed table

ANDO TA500 21" Commercial Band Saw with automated feed table

  • Tuscaloosa, Alabama, United States
  • Jun 3rd
Rockwell 28-3x0 20" Wood/Non-Ferrous Cutting Band Saw 2HP 230/460V 2 Speeds

Rockwell 28-3x0 20" Wood/Non-Ferrous Cutting Band Saw 2HP 230/460V 2 Speeds

  • Middlebury, Indiana, United States
  • Jun 3rd

People who viewed this item also vieved

1 HP 15 12 Speed Bench Mount Craftsman Drill Press 5/8 Chuck Sear Shop Equipment

1 HP 15 12 Speed Bench Mount Craftsman Drill Press 5/8 Chuck Sear Shop Equipment

  • Landis, North Carolina, United States
  • Jan 30th
Delta Drill Press Motor Electric D360

Delta Drill Press Motor Electric D360

  • Palo Pinto, Texas, United States
  • Jan 30th
Antique Prentice Bros. drill press/steam engine drill press

Antique Prentice Bros. drill press/steam engine drill press

  • Peoria, Illinois, United States
  • Jan 30th
Adwood Corp Cehisa EP - Motor And Housing LBCM-40 IP54, O.F. 25988 , Pujol

Adwood Corp Cehisa EP - Motor And Housing LBCM-40 IP54, O.F. 25988 , Pujol

  • Austin, Texas, United States
  • Jan 30th
Ryobi BT3000 BT3100 crank style aluminum metal handwheel. Hand wheel, handle.

Ryobi BT3000 BT3100 crank style aluminum metal handwheel. Hand wheel, handle.

  • Hubbard, Oregon, United States
  • Jan 30th
Monco Lamination Line, 2000, Brush, BC60 Heated Glue Spreader, TB60 Rotary Press

Monco Lamination Line, 2000, Brush, BC60 Heated Glue Spreader, TB60 Rotary Press

  • Sheboygan, Wisconsin, United States
  • Jan 30th
1290 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

1290 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

  • United States
  • Jan 30th
96 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

96 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

  • United States
  • Jan 30th
1287 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

1287 CNC 3d Relief Model STL for Router Mill ArtCam Aspire Cut3D 3D printer

  • United States
  • Jan 30th
56815 5" Dia. Non-Vacuum Dynorbital-Supreme Sander

56815 5" Dia. Non-Vacuum Dynorbital-Supreme Sander

  • Moscow, Idaho, United States
  • Jan 30th
NEW POWERMATIC DDS-225 25" DUAL DRUM SANDER 1791290

NEW POWERMATIC DDS-225 25" DUAL DRUM SANDER 1791290

  • Phoenix, Arizona, United States
  • Jan 30th
ANGLE GRINDER FOREDOM AK69110 2" GRINDER KIT - ATTACHMENT WITH ACCESSORIES

ANGLE GRINDER FOREDOM AK69110 2" GRINDER KIT - ATTACHMENT WITH ACCESSORIES

  • North Hollywood, California, United States
  • Jan 30th
Delta 46-700 wood lathe tailstock

Delta 46-700 wood lathe tailstock

  • Eureka, California, United States
  • Feb 16th
8" x 12" Bench Top Wood Lathe - Ideal for crafts hobbies & professional Projects

8" x 12" Bench Top Wood Lathe - Ideal for crafts hobbies & professional Projects

  • Columbia, Maryland, United States
  • Feb 17th
Saber 1440 Gear Head Lathe with DRO

Saber 1440 Gear Head Lathe with DRO

  • Spokane, Washington, United States
  • Feb 17th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies