+ Post new Ad
Garand Action Wrench, US $67.97 – Picture 0
Garand Action Wrench, US $67.97 – Picture 1
Garand Action Wrench, US $67.97 – Picture 0
Garand Action Wrench, US $67.97 – Picture 1

Garand Action Wrench

US $67.97

  • Terrebonne, Oregon, United States
  • Jan 30th
Open on mobile:
QR code
Receiver Wrench (M1) also (*M1A and M14) Unlike the other wrenches made for torquing Garand receivers, this set provides for smooth, uniform contact on top of the receiver ring and the bottom of the ring directly opposite. This wrench does not load the receiver rails (legs) as most other wrenches do and so eliminates the chance of deforming either a rail or a functional portion of the ring. Slots on the wrench bottom half provide clearance so that the flat at the ring bottom center can be used for torquing. If there is a reason to clamp against the bottom rails, then the lower block can simply be flipped over and used against the rails instead of the ring. Blocks use 1/2" diameter bolts on 3" centers, which is compatible with many handles already available and maybe already in your tool box. It's not entirely necessary to use a handle; the wrench blocks can simply be bolted to the edge of your work bench or any convenient flat bar. Having re-barreled many Garands, we find that the old barrel thread can take upwards of 200 ft-lbs to break loose and this tool will handle that easily. While it shouldn't be necessary to use that much torque to install/align a properly fit new barrel, this tool will also allow you to use as much torque as a qualified barrel smith would see fit. *When using it for the M1A or M14, all that needs to be done is to flip over the bottom jaws only as those don't use the slots. This auction is for the tool ONLY.     Made in the:
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Enter your own
Type Tool

Directions

Similar products from Fast Change Tools

DTM turning and facing holder H90-1A (Inv.31608)

DTM turning and facing holder H90-1A (Inv.31608)

  • Portland, Connecticut, United States
  • Jan 30th
DTM universal parting blade holder H90-7A (Inv.31609)

DTM universal parting blade holder H90-7A (Inv.31609)

  • Portland, Connecticut, United States
  • Jan 30th
DTM boring bar holder H90-B8A (Inv.31610)

DTM boring bar holder H90-B8A (Inv.31610)

  • Portland, Connecticut, United States
  • Jan 30th
Enco 4 way turret tool post 3-1/2 Inch (Inv.31612)

Enco 4 way turret tool post 3-1/2 Inch (Inv.31612)

  • Portland, Connecticut, United States
  • Jan 30th
NEW Grizzly H2970 Cut Off Holder with Blade 3-1/2-Inch

NEW Grizzly H2970 Cut Off Holder with Blade 3-1/2-Inch

  • United States
  • Jan 30th
NEW Huot Collet Rack for ER/DR/RD 40 Series Collets

NEW Huot Collet Rack for ER/DR/RD 40 Series Collets

  • United States
  • Jan 30th
ARMSTRONG 00-B LATHE ROCKER TOOL POST BORING BAR HOLDER 1/2" 3/8" 3/4"

ARMSTRONG 00-B LATHE ROCKER TOOL POST BORING BAR HOLDER 1/2" 3/8" 3/4"

  • Chino, California, United States
  • Jan 30th
Pair of Tecnara End Mill Holder (CAT-40) 400-310-7 & 400-307-3 NIB

Pair of Tecnara End Mill Holder (CAT-40) 400-310-7 & 400-307-3 NIB

  • Beaverton, Oregon, United States
  • Jan 30th
10 Pcs AXA Boring Turning&Facing Holder, Quick Change Tool Holder, #0250-0102x10

10 Pcs AXA Boring Turning&Facing Holder, Quick Change Tool Holder, #0250-0102x10

  • Richmond Hill, Ontario, Canada
  • Jan 30th
PHASE II+ 250-444 Series 400 - CA Quick Change Wedge Type Tool Post 14-20"Swing

PHASE II+ 250-444 Series 400 - CA Quick Change Wedge Type Tool Post 14-20"Swing

  • Hampshire, Illinois, United States
  • Jan 30th
3pc Aloris AXA Intro Pro Tool Post Lathe Swing 12" SET

3pc Aloris AXA Intro Pro Tool Post Lathe Swing 12" SET

  • Columbus, Ohio, United States
  • Jan 30th
Aloris AXAD-80L Diamond Turning & Facing Holder - LH - AXA Series (11C)

Aloris AXAD-80L Diamond Turning & Facing Holder - LH - AXA Series (11C)

  • Saint Louis, Missouri, United States
  • Jan 30th
NEW Aloris CA Super Precision Tool Post Lathe Swing 14"-20"

NEW Aloris CA Super Precision Tool Post Lathe Swing 14"-20"

  • Modesto, California, United States
  • Jan 30th
QCE3-1000 QUICK CHANGE END MILL ADAPTER 1"

QCE3-1000 QUICK CHANGE END MILL ADAPTER 1"

  • Lisle, Illinois, United States
  • Jan 30th
QCE3-1250 QUICK CHANGE 30 END MILL ADAPTER 1-1/4" D-IJ

QCE3-1250 QUICK CHANGE 30 END MILL ADAPTER 1-1/4" D-IJ

  • Lisle, Illinois, United States
  • Jan 30th
250-204 SHARS BORING BAR QUICK-CHANGE TOOL POST HOLDER

250-204 SHARS BORING BAR QUICK-CHANGE TOOL POST HOLDER

  • United States
  • Jan 30th
LOT KWIK-SWITCH TOOL HOLDERS 300 SERIES 150pc. (253LBS)

LOT KWIK-SWITCH TOOL HOLDERS 300 SERIES 150pc. (253LBS)

  • Waterford, Michigan, United States
  • Jan 30th
Kennametal KM50 Manual Clamping Unit KM50NCM4034 Quck Change Head & Tool Holder

Kennametal KM50 Manual Clamping Unit KM50NCM4034 Quck Change Head & Tool Holder

  • Cherryville, North Carolina, United States
  • Jan 30th
LATHE TOOL POST HOLDER - 5/8"-28 & 5/8"-13 THREADS

LATHE TOOL POST HOLDER - 5/8"-28 & 5/8"-13 THREADS

  • Chino, California, United States
  • Jan 30th
Lot of Five kwik switch 300 End Mill Holders 1/2", 5/8", 3/4", 7/8", 1"

Lot of Five kwik switch 300 End Mill Holders 1/2", 5/8", 3/4", 7/8", 1"

  • Holland, Ohio, United States
  • Jan 30th

People who viewed this item also vieved

Lyndex-Nikken Lyndex 830-016 R8 Taper Shank Steel End Mill Holder, 0.79" Nose

Lyndex-Nikken Lyndex 830-016 R8 Taper Shank Steel End Mill Holder, 0.79" Nose

  • USA, United States
  • May 25th
NEW Techniks SYIC-22225 CAT40 ER16 2.76" Collet Chuck Tool Holder

NEW Techniks SYIC-22225 CAT40 ER16 2.76" Collet Chuck Tool Holder

  • Edmonds, Washington, United States
  • May 25th
WALTER E16R-SDUCR07-R

WALTER E16R-SDUCR07-R

  • Perm, Russia, Russian Federation
  • May 27th
1 PH HORN BORING BAR 1" SHANK R253.0025.03 . MADE IN GERMANY,4 INSERTS KIT

1 PH HORN BORING BAR 1" SHANK R253.0025.03 . MADE IN GERMANY,4 INSERTS KIT

  • Charlotte, North Carolina, United States
  • May 27th
Kennametal 1" SHANK KTGPR-164C LATHE TURNING TOOL HOLDER INDEXABLE TP-43

Kennametal 1" SHANK KTGPR-164C LATHE TURNING TOOL HOLDER INDEXABLE TP-43

  • Ventura, California, United States
  • May 29th
Sandvik 1" SHANK WTGNR 16 4D H7M LATHE TURNING TOOL HOLDER INDEXABLE

Sandvik 1" SHANK WTGNR 16 4D H7M LATHE TURNING TOOL HOLDER INDEXABLE

  • Ventura, California, United States
  • May 29th
Malco MSHXL516 Hex Chuck Driver 5/16 Inch

Malco MSHXL516 Hex Chuck Driver 5/16 Inch

  • USA, United States
  • May 29th
TURRET LATHE SLEEVE 1" ID X 1 3/4 OD X 4 1/2 LONG #7858

TURRET LATHE SLEEVE 1" ID X 1 3/4 OD X 4 1/2 LONG #7858

  • Resaca, Georgia, United States
  • May 29th
MARTIN SDS 1-1/2" QD BUSHING

MARTIN SDS 1-1/2" QD BUSHING

  • Robertsdale, Alabama, United States
  • May 30th
SF1716 bushing

SF1716 bushing

  • North Wilkesboro, North Carolina, United States
  • May 30th
CARBOLOY BT40 1" END MILL HOLDER 3.34 PROJECTION STK 6791

CARBOLOY BT40 1" END MILL HOLDER 3.34 PROJECTION STK 6791

  • Wadley, Alabama, United States
  • Jun 1st
CARBOLOY BT40 3/4" END MILL HOLDER 3" PROJECTION STK 6792

CARBOLOY BT40 3/4" END MILL HOLDER 3" PROJECTION STK 6792

  • Wadley, Alabama, United States
  • Jun 1st
Kennametal/Erickson HSK63A/T 1" turning holder for Mazak Integrex mill turn used

Kennametal/Erickson HSK63A/T 1" turning holder for Mazak Integrex mill turn used

  • Rogers, Minnesota, United States
  • Jun 7th
VALENITE B8R ANVIL (2 PCS)

VALENITE B8R ANVIL (2 PCS)

  • Cadiz, Kentucky, United States
  • Jun 7th
Jacobs Super Drill Chuck Sleeve # 18N, NOS

Jacobs Super Drill Chuck Sleeve # 18N, NOS

  • Hopkinsville, Kentucky, United States
  • Jun 9th
Jacobs Chuck Arbor JT3 to MT2 / 3/8"-16 Threaded

Jacobs Chuck Arbor JT3 to MT2 / 3/8"-16 Threaded

  • Hopkinsville, Kentucky, United States
  • Jun 9th
K5-155CS SUNNEN HONE MANDREL WITH ADAPTER .155" - .160" RANGE

K5-155CS SUNNEN HONE MANDREL WITH ADAPTER .155" - .160" RANGE

  • Cleveland, Ohio, United States
  • Oct 20th
Sunnen Mandrel Rack SL-30 with drip pan

Sunnen Mandrel Rack SL-30 with drip pan

  • Scottsdale, Arizona, United States
  • Oct 21st
22kw 30HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 45A

22kw 30HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 45A

  • DongGuan, China
  • Nov 1st
18.5kw 25HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 37A

18.5kw 25HP 300hz VFD inverter frequency converter 3ph 380VAC to 3ph 0-380V 37A

  • DongGuan, China
  • Nov 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies