+ Post new Ad
GARR Tool 9/16" 4 Flute Ball Nose End Mill Solid Carbide 330MA USA 18327 New, US $270 – Picture 0
GARR Tool 9/16" 4 Flute Ball Nose End Mill Solid Carbide 330MA USA 18327 New, US $270 – Picture 0

Garr Tool 9/16" 4 Flute Ball Nose End Mill Solid Carbide 330ma Usa 18327 New

US $270

  • Oxnard, California, United States
  • Jun 10th
Open on mobile:
QR code
The ball radius tolerance is +.000"-.001" (+.000-.025mm), while the flute diameter is +.000-.002" (+.000-.050mm) and the 3mm-6mm shank diameter is +.0000-.0003" (-0.0000-0.0075mm). The tool has 4 flutes and a flute diameter of 0.5625". The corner radius is 0.0, and the end type is ball. This end mill is made from solid submicron grain carbide and is center cutting with a 30 degree helix. The weight of the tool is 0.39 lbs. The flute length is 1.25", and the shank diameter is 0.5625", with a neck diameter of 0.0. Thank you for your interest in this auction. Please note that a 8.00% sales tax is applied to orders shipped to California. It is suitable for dry or semi-dry machining and can increase speed by up to 40% compared to uncoated tools. This auction is for a GARR Tool 9/16" 4 Flute Ball Nose End Mill Solid Carbide 330MA USA 18327 New, part of the Series 330MA with EDP# 18327. The overall length is 4.0", and it has a reach length of 0.0 and neck length behind flutes of 0.0. If you have any concerns or questions after receiving the item, please contact me within 5 days for a full refund. For shank diameters of 1/4" to 1", the tolerance is -.0001-.0004" (-0.0025-0.0100mm).

Directions

Similar products from Solid Carbide Drill Bits

50 Micro Carbide PCB fab Drill Bits, resharpened #80, 4000 available

50 Micro Carbide PCB fab Drill Bits, resharpened #80, 4000 available

  • Clermont, Georgia, United States
  • Jun 11th
50 Micro Carbide PCB fab Drill Bits, resharpened #77, 2400 available

50 Micro Carbide PCB fab Drill Bits, resharpened #77, 2400 available

  • Clermont, Georgia, United States
  • Jun 11th
GUHRING 00732- 1,800 WN R-N DIAMETER 1,800 K 11137768

GUHRING 00732- 1,800 WN R-N DIAMETER 1,800 K 11137768

  • Libertyville, Illinois, United States
  • Jun 11th
YG DREAM DRILL - SOLID CARBIDE P/N 0271ATF 27/64" DIA ( 0.4219 ) X3D

YG DREAM DRILL - SOLID CARBIDE P/N 0271ATF 27/64" DIA ( 0.4219 ) X3D

  • Blythewood, South Carolina, United States
  • Jun 11th
YG DREAM DRILL - SOLID CARBIDE P/N DH404082 8.2 MM DIA ( 0.3228 ) X3D

YG DREAM DRILL - SOLID CARBIDE P/N DH404082 8.2 MM DIA ( 0.3228 ) X3D

  • Blythewood, South Carolina, United States
  • Jun 11th
GUHRING 00 609 006.000 SOLID CARB TIN GS2003FLT. DK460 000.2362"

GUHRING 00 609 006.000 SOLID CARB TIN GS2003FLT. DK460 000.2362"

  • Libertyville, Illinois, United States
  • Jun 11th
YG DREAM DRILL - SOLID CARBIDE P/N 0211ATF 21/64" DIA ( 0.3281 ) X3D ( 3-3/4" )

YG DREAM DRILL - SOLID CARBIDE P/N 0211ATF 21/64" DIA ( 0.3281 ) X3D ( 3-3/4" )

  • Blythewood, South Carolina, United States
  • Jun 11th
50 NEW #71 (.0260") Printed Circuit Board Drills, PCB

50 NEW #71 (.0260") Printed Circuit Board Drills, PCB

  • Georgetown, Texas, United States
  • Jun 11th
Courmatt CNC 3/4" Solid Carbide Roughing Spirals 3 Flute Chipbreaker Upcut Bit

Courmatt CNC 3/4" Solid Carbide Roughing Spirals 3 Flute Chipbreaker Upcut Bit

  • Alpharetta, Georgia, United States
  • Jun 11th
ILLG ? M42 15270 14MM L:2.999 14X1/2X1-1/8X3-1/8 MACHINIST DRILL BIT

ILLG ? M42 15270 14MM L:2.999 14X1/2X1-1/8X3-1/8 MACHINIST DRILL BIT

  • Morriston, Florida, United States
  • Jun 11th
Lot 3 GARR Tool 4 Flute Square End Mill Solid Carbide 630MA 42157 3/8" x 3" x 1"

Lot 3 GARR Tool 4 Flute Square End Mill Solid Carbide 630MA 42157 3/8" x 3" x 1"

  • Oxnard, California, United States
  • Jun 10th
Carbide drill bits Hertel..... 2 13/32 and 2 7/32..... plus one used 7/32 FREE

Carbide drill bits Hertel..... 2 13/32 and 2 7/32..... plus one used 7/32 FREE

  • Benton, Tennessee, United States
  • Jun 10th
4 Pieces NEW JOHNSON CARBIDE 785444-10-T25 Carbide TiAlN Drill 3 Flute

4 Pieces NEW JOHNSON CARBIDE 785444-10-T25 Carbide TiAlN Drill 3 Flute

  • Ballston Spa, New York, United States
  • Jun 10th
KEO Cutters KEO 55814 Solid Carbide Single-End Countersink, TiALN Coated, 6

KEO Cutters KEO 55814 Solid Carbide Single-End Countersink, TiALN Coated, 6

  • USA, United States
  • Jun 10th
GARR Tool 4 Flute Carbide EndMill VRX 27780 5/8x3x3/4" Rougher Corner Neck .025"

GARR Tool 4 Flute Carbide EndMill VRX 27780 5/8x3x3/4" Rougher Corner Neck .025"

  • Oxnard, California, United States
  • Jun 10th
Walter-Titex - 7/16 Inch, Solid Carbide, 140 Degree Point Angle, Spiral Type Flu

Walter-Titex - 7/16 Inch, Solid Carbide, 140 Degree Point Angle, Spiral Type Flu

  • Nelsonville, Ohio, United States
  • Jun 10th
(2) NOS OSG SOLID CARBIDE TWIST DRILL BITS Q DIAMETER #220-3320 STK 8916

(2) NOS OSG SOLID CARBIDE TWIST DRILL BITS Q DIAMETER #220-3320 STK 8916

  • Wadley, Alabama, United States
  • Jun 10th
2 Pc. Micro 100 DR Series 9/32" ( .2812") 2 FL Solid Carbide Jobber Drills

2 Pc. Micro 100 DR Series 9/32" ( .2812") 2 FL Solid Carbide Jobber Drills

  • Hamden, Connecticut, United States
  • Jun 10th
.705 Diameter SOLID Carbide Drill

.705 Diameter SOLID Carbide Drill

  • Howell, Michigan, United States
  • Jun 10th
WALTON 18001 Tap Extractors Sets

WALTON 18001 Tap Extractors Sets

  • Duncan, South Carolina, United States
  • Jun 10th

People who viewed this item also vieved

Walter Titex A6489DPP-13.5 Coolant Fed Drill, 13.5mm, K30F, Solid Carbide

Walter Titex A6489DPP-13.5 Coolant Fed Drill, 13.5mm, K30F, Solid Carbide

  • Kansas City, Missouri, United States
  • Jan 30th
SANDVIK COROMANT - 861.1-0650-078A1-GM GC34 - CoroDrill 861 SOLID CARBIDE DRILL

SANDVIK COROMANT - 861.1-0650-078A1-GM GC34 - CoroDrill 861 SOLID CARBIDE DRILL

  • Fort Myers, Florida, United States
  • Jan 30th
KOMET 1.000" KUB Trigon Indexable Drill (V57 52542)

KOMET 1.000" KUB Trigon Indexable Drill (V57 52542)

  • Round Lake, Illinois, United States
  • Jan 30th
Parlec BT 40 DA 180 x 3.15" CNC Double Angle Collet Chuck

Parlec BT 40 DA 180 x 3.15" CNC Double Angle Collet Chuck

  • Hamden, Connecticut, United States
  • Jan 30th
Parlec BT 40 TG 100 x 3.15" CNC Collet Chuck

Parlec BT 40 TG 100 x 3.15" CNC Collet Chuck

  • Hamden, Connecticut, United States
  • Jan 30th
Guhring drill set .750

Guhring drill set .750

  • Carpenter, South Dakota, United States
  • Jan 30th
Jobber Length Drills #22 HSS 118D Oxide 2" LOC x 3-1/8" OAL QTY 12 <1917>

Jobber Length Drills #22 HSS 118D Oxide 2" LOC x 3-1/8" OAL QTY 12 <1917>

  • Saint Louis, Missouri, United States
  • Jan 30th
Jobber Length Drills #42 HSS 118D Oxide 1-1/4&#034; LOC x 2-1/4&#034; OAL QTY 12 &lt;1908&gt;

Jobber Length Drills #42 HSS 118D Oxide 1-1/4" LOC x 2-1/4" OAL QTY 12 <1908>

  • Saint Louis, Missouri, United States
  • Jan 30th
Jobber Length Drill Bits 17/64&#034; 0.2656&#034; 118 Deg HSS TiN USA Qty 4 [053]

Jobber Length Drill Bits 17/64" 0.2656" 118 Deg HSS TiN USA Qty 4 [053]

  • Saint Louis, Missouri, United States
  • Jan 30th
1 NEW 32 MM ALLIED SPADE DRILL INSERT BITS. 4C22H-32 AMEC {F257}

1 NEW 32 MM ALLIED SPADE DRILL INSERT BITS. 4C22H-32 AMEC {F257}

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW 66 MM ALLIED SPADE DRILL INSERT BITS. 090319-506 REV.0(A) AMEC {F275}

1 NEW 66 MM ALLIED SPADE DRILL INSERT BITS. 090319-506 REV.0(A) AMEC {F275}

  • Mentor, Ohio, United States
  • Jan 30th
1 NEW 32.5 MM ALLIED SPADE DRILL INSERT BITS. 4C22H-32.5 AMEC {F256}

1 NEW 32.5 MM ALLIED SPADE DRILL INSERT BITS. 4C22H-32.5 AMEC {F256}

  • Mentor, Ohio, United States
  • Jan 30th
NIB Guhring 11/16&#034; Series 329 #55170 HS-CO Screw Machine Drill

NIB Guhring 11/16" Series 329 #55170 HS-CO Screw Machine Drill

  • Hurricane, West Virginia, United States
  • Jan 30th
.4688&#034; 15/32&#034; HIGH SPEED STEEL 135 DEGREE SPLIT POINT STUB DRILL

.4688" 15/32" HIGH SPEED STEEL 135 DEGREE SPLIT POINT STUB DRILL

  • Petaluma, California, United States
  • Jan 30th
.4688&#034; 15/32&#034; HIGH SPEED STEEL STUB DRILL

.4688" 15/32" HIGH SPEED STEEL STUB DRILL

  • Petaluma, California, United States
  • Jan 30th
BUTTERFIELD 1-1/32IN D 10-7/8IN L TAPER SHANK DRILL BIT REPLACEMENT PART B268939

BUTTERFIELD 1-1/32IN D 10-7/8IN L TAPER SHANK DRILL BIT REPLACEMENT PART B268939

  • Buffalo, New York, United States
  • Jan 30th
BUTTERFIELD 31/32IN D 10-1/2IN L TAPER SHANK DRILL BIT REPLACEMENT PART B268929

BUTTERFIELD 31/32IN D 10-1/2IN L TAPER SHANK DRILL BIT REPLACEMENT PART B268929

  • Buffalo, New York, United States
  • Jan 30th
BUTTERFIELD 55/64IN D 10-1/2IN L TAPER SHANK DRILL BIT REPLACEMENT PART B268917

BUTTERFIELD 55/64IN D 10-1/2IN L TAPER SHANK DRILL BIT REPLACEMENT PART B268917

  • Buffalo, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies