+ Post new Ad
Gecko Drive G540 4 axis rev 8 and Free Power Supply CNC STEPPER PLASMA ROUTER, US $299.00 – Picture 0
Gecko Drive G540 4 axis rev 8 and Free Power Supply CNC STEPPER PLASMA ROUTER, US $299.00 – Picture 0

Gecko Drive G540 4 Axis Rev 8 And Free Power Supply Cnc Stepper Plasma Router

US $299.00

  • Wheelersburg, Ohio, United States
  • Jan 29th
Open on mobile:
QR code
Included with the Gecko G540 is a 350w power supply 48v. 110v or 220v The G540 that I sell are the latest version REV 8 with the mods that geckodrive is now installing. They have the added filter capacitor on the sense lines. It has the trim pots located closer to the openings. If you aren't getting a rev 8 from other sources then you not getting the latest version. The G540 is a complete 4-axis system which plugs directly into your computer via the parallel port and to your motors through DB9 connectors. It contains four of our G250 drives, our own breakout board and a hard anodized aluminum case. Comes with full factory warranty from Gecko. G540 Specifications: - Four 10-Microstep motor drives - 0 to 3.5A rated phase current - 18VDC to 50VDC supply voltage - Mid-band resonance compensation - Auto standby current (70% current) - Short-circuit protected - Optoisolation on all LPT signal pins - Two 1A at 0 to 50VDC rated outputs - Four SPST to GND inputs (TTL) - FAULT indicator LED,signal to PC - POWER indicator LED - I-SET resistor on motor connector - TRIM adjust for motor smoothness - Panel mount (5.7” by2.4” hole dim.) - Anodized aluminum package - No heatsink needed below 40C ambient - Easy to service, removable drives - Modular PCB design with no internal wires - 10kHz watchdog timer (charge pump) - Optoisolated analog output for a VFD drive - Conservative ratings, premium components - Comes with four backshells and four DB9 solder cup connectors
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand GECKO
Model G540

Directions

Similar products from Stepper Motor Driver Boards & Modules

10PC dc 4 Wire 2 Phase Miniature stepper motor micro stepping motor for camera

10PC dc 4 Wire 2 Phase Miniature stepper motor micro stepping motor for camera

  • Guangdong, China
  • Jan 29th
Nidec 5PCS DC Mini motor Micro stepper motor 7MM stepper motor with division bar

Nidec 5PCS DC Mini motor Micro stepper motor 7MM stepper motor with division bar

  • Guangdong, China
  • Jan 29th
10PCS 3V-5V DC 4 Wire 2 Phase Mimi stepper motor micro stepper motor For camera

10PCS 3V-5V DC 4 Wire 2 Phase Mimi stepper motor micro stepper motor For camera

  • Guangdong, China
  • Jan 29th
10PC 3V-5V DC 4 Wire 2 Phase Mini stepper motor dc micro motor with Plastic Gear

10PC 3V-5V DC 4 Wire 2 Phase Mini stepper motor dc micro motor with Plastic Gear

  • Guangdong, China
  • Jan 29th
10pcs Nidec 3V-5V DC 2 phase 4 wire Miniature stepper motor micro stepper motor

10pcs Nidec 3V-5V DC 2 phase 4 wire Miniature stepper motor micro stepper motor

  • Guangdong, China
  • Jan 29th
10PCS 3-5V DC 4 Wire 2 Phase Micro Stepper Motor Mini Stepping motor for Camera

10PCS 3-5V DC 4 Wire 2 Phase Micro Stepper Motor Mini Stepping motor for Camera

  • Guangdong, China
  • Jan 29th
10PC DC 3-5V 1-1500RPM Metal Dia 6mm 2 Phase 4 Wire Stepper Motor Stepping motor

10PC DC 3-5V 1-1500RPM Metal Dia 6mm 2 Phase 4 Wire Stepper Motor Stepping motor

  • Guangdong, China
  • Jan 29th
10PCS 4 Wire 2 Phase Mimi stepper motor micro stepper motor D6xH7mm For camera

10PCS 4 Wire 2 Phase Mimi stepper motor micro stepper motor D6xH7mm For camera

  • Guangdong, China
  • Jan 29th
L298N dual H bridge dc stepper motor driver module with screw and nut GIFT

L298N dual H bridge dc stepper motor driver module with screw and nut GIFT

  • Shenzhen, China
  • Jan 29th
2 phase 23HA3211-21-1200 CNC Step Stepping Stepper Motor 4.5V 1.0±0.1A

2 phase 23HA3211-21-1200 CNC Step Stepping Stepper Motor 4.5V 1.0±0.1A

  • CN, China
  • Jan 29th
OMRON proximity switch E2K-X8MY1 2 month warranty

OMRON proximity switch E2K-X8MY1 2 month warranty

  • hongkong , Hong Kong
  • Jan 29th
OMRON S8JC-Z15024C DC24V 6.5A switching power supply 2 month warranty

OMRON S8JC-Z15024C DC24V 6.5A switching power supply 2 month warranty

  • hongkong , Hong Kong
  • Jan 29th
3D CNC SPECTRALIGHT ENGRAVING MINI MILL CAD CAM SERVO

3D CNC SPECTRALIGHT ENGRAVING MINI MILL CAD CAM SERVO

  • Shiner, Texas, United States
  • Jan 29th
RORZE RD-122 Stepping Motor Driver

RORZE RD-122 Stepping Motor Driver

  • INCHON, Korea, South
  • Jan 29th
TWO (2) KEN TOOLS ( 1.530"-1.275") (1.160"-1.100") MADE IN U.S.A. TRUCK TRACTOR

TWO (2) KEN TOOLS ( 1.530"-1.275") (1.160"-1.100") MADE IN U.S.A. TRUCK TRACTOR

  • Shiner, Texas, United States
  • Jan 29th
CNC ! TESTED OK ! 3D DENFORD ENGRAVING MINI MILL CAD CAM SERVO PRINTER LAPTOP

CNC ! TESTED OK ! 3D DENFORD ENGRAVING MINI MILL CAD CAM SERVO PRINTER LAPTOP

  • Shiner, Texas, United States
  • Jan 29th
CNC MINI LATHE CAD CAM SERVO MICROTURN

CNC MINI LATHE CAD CAM SERVO MICROTURN

  • Shiner, Texas, United States
  • Jan 29th
10pc 3-5V 4 Wire 2 Phase Miniature stepper motor D6mmx H11mm Micro stepper motor

10pc 3-5V 4 Wire 2 Phase Miniature stepper motor D6mmx H11mm Micro stepper motor

  • hongkong, China
  • Jan 29th
VEXTA 2-phase driver UD2115B

VEXTA 2-phase driver UD2115B

  • INCHON, Korea, South
  • Jan 29th
PARKER COMPUMOTOR 6K2 2-AXIS Servo/Stepper Controller

PARKER COMPUMOTOR 6K2 2-AXIS Servo/Stepper Controller

  • Flemington, New Jersey, United States
  • Jan 29th

People who viewed this item also vieved

NIB ASTROSYN RH1730600 STEPPER MOTOR 23KM-K033-03 T0202-02

NIB ASTROSYN RH1730600 STEPPER MOTOR 23KM-K033-03 T0202-02

  • Utica, Michigan, United States
  • Jun 5th
Fieldserver Bridge FS B2010-01 with AC cord

Fieldserver Bridge FS B2010-01 with AC cord

  • Brownsville, Texas, United States
  • Jun 5th
NEW WARNER ELECTRIC SPLINED ARMATURE HUB 540-0148

NEW WARNER ELECTRIC SPLINED ARMATURE HUB 540-0148

  • Brook Park, Ohio, United States
  • Jun 5th
Dings Dynamics 4-62010-530-P1F Brake Unit End Mount 575V 462010530P1F New

Dings Dynamics 4-62010-530-P1F Brake Unit End Mount 575V 462010530P1F New

  • Salt Lake City, Utah, United States
  • Jun 5th
Cutler Hammer Renewal Parts Kit Definite Purpose Conatctor 6-331-17

Cutler Hammer Renewal Parts Kit Definite Purpose Conatctor 6-331-17

  • Louisville, Kentucky, United States
  • Jun 5th
Square D Magnet Coil 31063-409-38 Size 2 120 volt

Square D Magnet Coil 31063-409-38 Size 2 120 volt

  • Louisville, Kentucky, United States
  • Jun 5th
Cutler Hammer Renewal Parts Kit Definite Purpose Conatctor 6-331-15

Cutler Hammer Renewal Parts Kit Definite Purpose Conatctor 6-331-15

  • Louisville, Kentucky, United States
  • Jun 5th
GE Lighting Contactor 463L40AJA10A0 30A 120V NEW

GE Lighting Contactor 463L40AJA10A0 30A 120V NEW

  • Burlington, Kentucky, United States
  • Jun 9th
ALLEN BRADLEY 500BOH930 3 POLE 27 AMP CONTACTOR

ALLEN BRADLEY 500BOH930 3 POLE 27 AMP CONTACTOR

  • Lexington, Kentucky, United States
  • Jun 9th
2-ALLEN BRADLEY 500FBOD93 3 POLE 30 AMP CONTACTORS

2-ALLEN BRADLEY 500FBOD93 3 POLE 30 AMP CONTACTORS

  • Lexington, Kentucky, United States
  • Jun 9th
2- ALLEN BRADLEY 500LBOD93 3 POLE 30 AMP CONTACTORS 120V COILS

2- ALLEN BRADLEY 500LBOD93 3 POLE 30 AMP CONTACTORS 120V COILS

  • Lexington, Kentucky, United States
  • Jun 9th
ALLEN BRADLEY 100-B600N*3 3 PH 200-600HP CONTACTOR USED

ALLEN BRADLEY 100-B600N*3 3 PH 200-600HP CONTACTOR USED

  • Halls, Tennessee, United States
  • Jun 9th
Allen Bradley Size 3 Motor Starter 509-DOD 509-D0D 50hp 90% Contacts

Allen Bradley Size 3 Motor Starter 509-DOD 509-D0D 50hp 90% Contacts

  • Jenison, Michigan, United States
  • Jun 9th
Square D 8536-SG01 Size 5 SerA Magnetic Motor Starter 480V Coil

Square D 8536-SG01 Size 5 SerA Magnetic Motor Starter 480V Coil

  • Burlington, Kentucky, United States
  • Jun 9th
1237-4104 48V 100A Motor Speed Controller

1237-4104 48V 100A Motor Speed Controller

  • Morton Grove, Illinois, United States
  • Jun 9th
1235-3102 36V Motor Speed Controller

1235-3102 36V Motor Speed Controller

  • Morton Grove, Illinois, United States
  • Jun 9th
25% 50% 75% 100% PWM Duty Ratio Fan/Motor Speed Lightness Controller

25% 50% 75% 100% PWM Duty Ratio Fan/Motor Speed Lightness Controller

  • HK, Hong Kong
  • Jun 9th
BOSTON GEAR REDUCTOR F652A-25-B9

BOSTON GEAR REDUCTOR F652A-25-B9

  • Bedford, Ohio, United States
  • Jun 9th
Rodix FC-70 Feeder Cube 121-45 120VAC 5A

Rodix FC-70 Feeder Cube 121-45 120VAC 5A

  • Brigham City, Utah, United States
  • Jun 9th
6V-90V 15A Pulse Width Modulator PWM DC Motor Speed Control Switch Controller

6V-90V 15A Pulse Width Modulator PWM DC Motor Speed Control Switch Controller

  • fuzhou CN, China
  • Jun 9th
10-50V 40A DC Motor Speed Control PWM HHO RC Controller 12V 24V 48V 2000W MAX

10-50V 40A DC Motor Speed Control PWM HHO RC Controller 12V 24V 48V 2000W MAX

  • fuzhou CN, China
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies