This is auction is for a Gecko G540 Stepper Motion Controller package. .Also included is 3 300oz in 3.5a stepper motors. These motors are a perfect combination for the Gecko. Please review them here. (Click the link below for full details, and once done with reviewing it refresh the page to bring you back to reviewing this listing) Please read the entire auction carefully to see the detail this system offers compared to other vendors The system features fuse protected IEC port, and auxiliary 120v outlet to power other items requiring 120v. The power switch is illuminated to reflect "on" staus, and minature mushroom E-Stop switch is provided. The system is wired with 16AWG, and (20AWG -E-Stop Switch doesn't receive current)) and each terminal is insulated with heatshrink to provide safety. The wires are secured internally with wire ties for optimal airflow. The enclosure is a full aluminum (1.5mm in thickness) unit featuring cooling slots throughout to aid in cooling the system. The Gecko includes our Avvid Thermalloy custom heatsinks preinstalled with Arctic Silver Thermal Epoxy, and Sanyo industrial 60mm cooling fan that puts out 60 Cubic Feet perMinute @ 10,000RPM! The cooling system installed in this system allows for removal of the Gecko WITHOUT having to remove the fan or heatsinks for ease of maintenance. Unscrew 4 screws, and the Gecko is out!. The Gecko must be cooled in an enclosure to prevent overheating, and possible damage. Refer to this link to review Gecko's Heatsink Experiment http://www.geckodrive.com/g540-heatsinking Be cautious if you purchase a system without a proper cooling solution. The power supply included is up to the customers specific needs, and budget. I offer a 48v 12.5a 220v model for extreme power hungry systems, and a 48v 8.3a unit for complete typical 4 axis support with the Gecko. Please refer to Gecko Drives tutorial on selecting a power supply http://www.geckodrive.com/support/step-motor-basics/power-supply-basics.html You should have a model that will power your system correctly, however spending more for a larger model that's providing excess power you will never utilize is really a waste of money. 48v 8.3a version is the price listed in the "Buy It Now" If you want the 12.5a version the price is $55 additional. Message me prior to buying. The typical build time is no more than 3 days, and you will still have the system with the lead time included in no more than 10 days if one isn't in stock currently assembled. Each system is built tested , and calibrated prior to shipment. Also included is three of our solderless motor connectors with integrated mounting brackets, and 3 10ft DB9 motor cables. (Simply attach your motors 4 wires via the color codes for the Gecko on the solderless connectors, along with your selected resistor on the white color coded terminal ports. You will be up, and running in MINUTES! If you need to change motors or use a different resistor you can do it in as fast as you can unscrew 6 screws! An IEC 6ft power cord is included as well as DB25 Parallel cable to attach the system to your computer. The pictures directly show that all details were covered. This system will satisfy the hobbiest to the professional at a cost that's less than you purchasing the items seperately anywhere, and fabricating it yourself using the same components. The Gecko driver is the new revision 8 model with 2014 QC date code. Gecko G540 Specs Four 10-Microstep motor drives 0 to 3.5A rated phase current 18VDC to 50VDC supply voltage Mid-band resonance compensation Auto standby current (70% current) Short-circuit protected Optoisolation on all LPT signal pins Two 1A at 0 to 50VDC rated outputs Four SPST to GND inputs (TTL) FAULT indicator LED,signal to PC POWER indicator LED I-SET resistor on motor connector TRIM adjust for motor smoothness Panel mount (5.7” by2.4” hole dim.) Anodized aluminum package No heatsink needed below 40C ambient Easy to service, removable drives Modular PCB design with no internal wires 10kHz watchdog timer (charge pump) Optoisolated analog output for a VFD drive Conservative ratings, premium components Shipping in the US is $15.85 International shipping is welcome with adjusted shipping rate. Please message me prior to purchasing for a quote. I insure all motion controllers as standard. They will require signature due at delivery due to there value.
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
