+ Post new Ad
General PRO-ANGLE DIGITAL PROTRACTOR and DIGITAL CALIPER, US $5300 – Picture 0
General PRO-ANGLE DIGITAL PROTRACTOR and DIGITAL CALIPER, US $5300 – Picture 0

General Pro-angle Digital Protractor And Digital Caliper

US $5300

  • Bethlehem, Pennsylvania, United States
  • Jan 30th
Open on mobile:
QR code
6" Electronic Digital Vernier Caliper Measurement in both SAE (inch) or Metric (mm) with conversion Zero setting in any position Measurement types: internal dimension, external dimension, depth and steps Made of hight quality hardened stainless steel Large LCD Display With a small locking thumb screw which locks the jaws in place Automatic turn-off fuction Measure range: 0 - 6" (0 - 150mm) Resolution: 0.0005"/0.01mm Accuracy: 0.001"/0.02mm (< 4"/100mm measurement) Repeatability: 0.0005"/0.01mm Maximum measuring speed: 60"(1500mm)/sec. Measuring system: linear capacitive Working temperature: 41 - 104F (5 - 40C) Power: One 1.5V LR44 button Cell (one cells included) Brand new with protective hard case and user instructions Note: Accuracy affected in enviroment exceeding 80% relative humidity Large, easy-to-read display. Absolute and Relative measurements. 6" (150mm) Stainless Steel Protractor Arm. with Knurled Locking Nut. Accuracy: 0.1A‚A°. Resolution: 0.05A‚A°. Range: 0.00A‚A? to 180.00A‚A?. Display can be inverted for easy reading. Hold function to freeze measurement. Thumb Screw will lock arm in any position. Battery Compartment (CR2032 1.55V). General 1702 Pro-Angle 6" Stainless Steel Digital Protractor

Directions

Similar products from Metalworking Equipment

machinist tools

machinist tools

  • Van Buren, Arkansas, United States
  • Jan 30th
Vintage Jewelry Master Hob Hand Engraved Tassel Stamping Tool Hub Die

Vintage Jewelry Master Hob Hand Engraved Tassel Stamping Tool Hub Die

  • Warwick, New York, United States
  • Jan 30th
ARBOR ADAPTER - JACOBS - DRILL CHUCK

ARBOR ADAPTER - JACOBS - DRILL CHUCK

  • Mohnton, Pennsylvania, United States
  • Jan 30th
LARGE LOT OF MACHINISTS TOOLS JACOBS CHUCK CUTTING DOUBLE END BITS MUCH MORE

LARGE LOT OF MACHINISTS TOOLS JACOBS CHUCK CUTTING DOUBLE END BITS MUCH MORE

  • Newport, Vermont, United States
  • Jan 30th
Etch-O-Matic EOM-1 Starter Set Amperage Rating: 2 Amps Volts: 10 Volts

Etch-O-Matic EOM-1 Starter Set Amperage Rating: 2 Amps Volts: 10 Volts

  • Durham, New Hampshire, United States
  • Jan 30th
Lot 1pcs Metric HSS(M2) Plug Taps M18 M18x1.5mm Right Hand Machine Tap Cheaper

Lot 1pcs Metric HSS(M2) Plug Taps M18 M18x1.5mm Right Hand Machine Tap Cheaper

  • JN,SD, China
  • Jan 30th
Vintage Little Giant Greenfield Mass. Tap &amp; Die Set In Original Case GTD WELLS

Vintage Little Giant Greenfield Mass. Tap & Die Set In Original Case GTD WELLS

  • Los Angeles, California, United States
  • Jan 30th
CINCINNATI, PRESS BRAKE, WIDE BED &amp; FLANGED RAM, FIXED, RUNS GREAT, 600 TON

CINCINNATI, PRESS BRAKE, WIDE BED & FLANGED RAM, FIXED, RUNS GREAT, 600 TON

  • Roseville, Michigan, United States
  • Jan 30th
NILES, VBM, 84&#034; CHUCK, 120&#034; SWING, OLDER, RUNS, NEEDS PIT

NILES, VBM, 84" CHUCK, 120" SWING, OLDER, RUNS, NEEDS PIT

  • Warren, Michigan, United States
  • Jan 30th
American Machinist Handbook, 2nd edition, 1914

American Machinist Handbook, 2nd edition, 1914

  • Portland, Oregon, United States
  • Jan 30th
Machinst Made - 2-4-6, 1-2-3, and 1 inch gauge blocks + Bridgeport Style Stop

Machinst Made - 2-4-6, 1-2-3, and 1 inch gauge blocks + Bridgeport Style Stop

  • Valparaiso, Indiana, United States
  • Jan 30th
Precision Steel Parallels 20 Pr Set 1/32 Parallel Blue

Precision Steel Parallels 20 Pr Set 1/32 Parallel Blue

  • San Gabriel, California, United States
  • Jan 30th
Adjustable Parallels 6 Piece Set 3/8&#034; - 2-1/4&#034; Parallel

Adjustable Parallels 6 Piece Set 3/8" - 2-1/4" Parallel

  • San Gabriel, California, United States
  • Jan 30th
ROUSSELLE PL2012 20 TON x 5? Hydraulic Press Brake

ROUSSELLE PL2012 20 TON x 5? Hydraulic Press Brake

  • Arlington, Texas, United States
  • Jan 30th
ASSORTMENT OF HEAVY DUTY STEEL CHISELS

ASSORTMENT OF HEAVY DUTY STEEL CHISELS

  • Chino, California, United States
  • Jan 30th
Derbyshire Micromill Watchmakers Gear Cutting Milling Machine c/w 12&#034; Table

Derbyshire Micromill Watchmakers Gear Cutting Milling Machine c/w 12" Table

  • Perth, Ontario, Canada
  • Jan 30th
J.H. Williams &amp; Co. No. 2-K KNURLING TOOL Custom

J.H. Williams & Co. No. 2-K KNURLING TOOL Custom

  • Spring Valley, California, United States
  • Jan 30th
MORI SEIKI #MV JR CNC VERTICAL MACHINING CENTER

MORI SEIKI #MV JR CNC VERTICAL MACHINING CENTER

  • Brook Park, Ohio, United States
  • Jan 30th
MORI SEIKI #MV JR CNC VERTICAL MACHINING CENTER - 4TH/5TH AXIS

MORI SEIKI #MV JR CNC VERTICAL MACHINING CENTER - 4TH/5TH AXIS

  • Brook Park, Ohio, United States
  • Jan 30th
SENECA FALLS #LR 10&#034; X 31&#034; LO-SWING LATHE

SENECA FALLS #LR 10" X 31" LO-SWING LATHE

  • Brook Park, Ohio, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies