?German Ship?4Axis Nema34 Longs Stepper Motor 878 oz.in&Driver DM860A CNC Router, US $499.00 – Picture 0

?German Ship?4Axis Nema34 Longs Stepper Motor 878 oz.in&Driver DM860A CNC Router, US $499.00 – Picture 1

?German Ship?4Axis Nema34 Longs Stepper Motor 878 oz.in&Driver DM860A CNC Router, US $499.00 – Picture 2

?German Ship?4Axis Nema34 Longs Stepper Motor 878 oz.in&Driver DM860A CNC Router, US $499.00 – Picture 3

?German Ship?4Axis Nema34 Longs Stepper Motor 878 oz.in&Driver DM860A CNC Router, US $499.00 – Picture 4

?german Ship?4axis Nema34 Longs Stepper Motor 878 Oz.in&driver Dm860a Cnc Router

US $499.00

Hamburg, Germany
Jun 9th

Open on mobile:
QR code

The Nema 34 stepper motor features a step angle of 1.8 В°, a motor length of 96.4mm, rated voltage (V) of 23.2, a rated current (A) of 3.215, a phase resistance (О©) of 8.81, a phase inductance (mH) of 1.73, holding torque (oz.in) of 878, lead wire (NO.) of 4, rotor inertia (kg. c?) of 0.81, and motor weight (kg) of 5.0. The Stepper motor driver - DM860A - has a circuit similar to servo control, which allows the motor to run quietly and almost devoid of vibrations. The driver enables significantly higher holding torque under high speed compared to other two-phase drivers. Additionally, the positioning accuracy is also higher. The driver is mainly used in medium and large CNC control devices, such as carver machines, CNC machines, computer embroider machines, and packing machines, among others. It features high performance, low price, average current control, 2-phase sinusoidal output current drive, opto-isolated signal I/O, overvoltage/undervoltage/overcorrect/phase short circuit protection, 14 channels subdivision, automatic idle-current reduction, 8 channels of output phase current setting, offline command input terminal, and motor torque related to speed, but not step/revolution. The German Ship has recently brought forth the 4Axis Nema34 Longs Stepper Motor with a whopping 878 oz.in &Driver DM860A CNC Router to EU buyers. Purchasers from the EU need not worry about any additional taxes and can expect a quicker delivery. Visit longs-motor.com for more information on this product bundle that includes 4 pieces of Nema 34 stepper motor with a bipolar single shaft, 4 pieces of stepper motor driver DM860A with a peak of 7.8A and 256 Micsteps replacing M860, 4 pieces of Power Supply 200W-60V/3.3A, and 1 piece of Breakout Board & Parallel cable (which is offered free of cost when you purchase all of the above). The power supply is of 200Watts, and the output voltage is 60VDC. The Breakout Board comes with a built-in DB25 male connector, DB25 Output Pin: P

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Longs Motor
MPN	34HST9805-37B2 DM860A 201W-60V DB25