Germany Free Ship! 3Axis Nema 23 270oz,3A,4wire motor&DRIVER DQ542MA,CNC engrave, US $560 – Picture 0

Germany Free Ship! 3Axis Nema 23 270oz,3A,4wire motor&DRIVER DQ542MA,CNC engrave, US $560 – Picture 1

Germany Free Ship! 3Axis Nema 23 270oz,3A,4wire motor&DRIVER DQ542MA,CNC engrave, US $560 – Picture 2

Germany Free Ship! 3Axis Nema 23 270oz,3A,4wire motor&DRIVER DQ542MA,CNC engrave, US $560 – Picture 3

Germany Free Ship! 3Axis Nema 23 270oz,3A,4wire motor&DRIVER DQ542MA,CNC engrave, US $560 – Picture 4

Germany Free Ship! 3axis Nema 23 270oz,3a,4wire Motor&driver Dq542ma,cnc Engrave

US $560

Changzhou ,Jiangsu, China
Jan 29th

Open on mobile:
QR code

Great News! Free shipping cost ! Ship from USA&Germany warehouse, after payment, within 5-7 days for receiving products! No taxes from customs, no damage, better service, please don't hesitate! This item includes: 3 PCS Wantai Nema 23 Stepper Motor 57BYGH627, single shaft with 270 oz-in Holding Torque ,3A,4-Leads this motor sold very well ! it is 4-Leads , on CNC cut mill,engrave,Robot arm... .the 4-Leads motor is more popular than 6-Leads , if you need 6-Leads ,we also have the similar motor 57BYGH633,270oz-in,3A,6-Leads ,and the price is same ! Thank you! friend :D 3 PCS Wantai Stepper Driver with 4.2A DQ542MA replacing M542 , 1 PCS Power Supply for 350W,36VDC,9.8A 1 PC DB25 Breakout Board & 1 Cable for free offering More Quantities , More Popular Price ! Wish you have a nice shopping here ! Thank you! friend :D we may also chat online ! :D Pls add my Skype:happy_saron OR MSN:saron1@live.cn http://www.wantmotor.com 1, Stepper Motor Technical Specifications Part No.: 57BYGH627 single shaft Frame Size: NEMA23 Step Angle: 1.8 degree Voltage: 3.0VDC Current: 3.0 A/phase Resistance: 1.0 Ohm/phase Inductance: 3.5 mH/phase Holding torque: 19 Kg-cm 270 oz-in Rotor inertia: 480 g-cm2 Detent torque: 0.6 kg-cm Number of wire leads: 4 Weight: 2.20lb (1.0 kg) Length: 76mm Shaft diamter: 6.35mm (1/4") Please tell us if you need Double shaft or single shaft, we can manufacture both for you. If you need Double shaft, please tell us your requirements for length of front and rear shaft, as well as the diameter. So that we can offer you the quite good products, thanks! 2, Stepper Motor Driver with 4.2A Current, DQ542MA DQ542MA is a type of two-phase hybrid stepping motor driver, The drive voltage of which is from 18VDC to 50VDC. It is designed for use with 2-phase hybrid stepper motor of all kinds with 42mm to 86mm outside diameter and less than 4.0A phase current. This circuit that it adopts is similar to the circuit of servo control which enables the motor run smoothly almost without noise and vibration. Hording torque when DQ542MA run under high speed is also significantly higher than the other two-phase driver, what’s more, the positioning accuracy is also higher. It is widely used in middle and big size numerical control devices such as curving machine, CNC machine, Computer embroider machine, packing machines and so on. Features: l High performance, low price l Average current control, 2-phase sinusoidal output current drive l Supply voltage from 18VDC to 50VDC l Opto-isolated signal I/O l Overvoltage, under voltage, overcorrect, phase short circuit protection l 15 channels subdivision and automatic idle-current reduction l 8 channels output phase current setting l Offline command input terminal l Motor torque is related with speed, but not related with step/revolution l High start speed l High hording torque under high speed Electrical specification: Input voltage 18-50VDC Input current

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Wantai Motor
Country of Manufacture	China
Model	57BYGH627&DQ542MA