Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 0

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 1

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 2

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 3

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 4

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 5

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 6

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 7

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 8

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 9

Gilson Gilsonic AutoSiever Model GA-1 - Warranty, US $1,075.00 – Picture 10

Gilson Gilsonic Autosiever Model Ga-1 - Warranty

US $1,075.00

Palisades Park, New Jersey, United States
Jan 30th

Open on mobile:
QR code

Please contact us for additional information through ebay mail, or directly at: nrscientific@gmail.com (201) 592-1864. Gilson Gilsonic AutoSiever Model GA-1 Model: GA-1 S/N: 1270 115/230 V / 50-60 Hz / 1.5 A. External Dimensions: 10"w x 11"d x w 21"h This siever will ship in excellent operational condition, and carries our standard 4-month, no-nonsense warranty. A new, current replacement siever costs $6,900.00. For your reference, the seller is N&R Scientific Co., Inc. We have been providing the highest quality refurbished and fully guaranteed equipment worldwide for many years. You can purchase with complete confidence that the equipment will be provided in excellent cosmetic and perfect operational condition. Our facility is located in the metropolitan NYC area. Manufacturer's Description: The GilSonic AutoSiever is the most accurate and reliable siever available for particle sizing of dry powders and fine granular materials. Testing profiles are fully customizable, assuring consistent, repeatable values for even the most difficult materials. Only minimal training is required for proper operation. 3,600 sonic energy pulses per minute oscillate the air column enclosed within the sieve stack. This agitation continuously excites and reorients the particles to the mesh surface. Programmable tapping clears the sieves and prevents lumps from forming in the materials. Controls for intensity, ramp and dwell, and total test time assure fully customizable profiles for many different material types. Up to ten profiles can be saved in non-volatile memory, assuring repeatability for similar materials. The AutoSiever is designed and manufactured in the USA to meet CE requirements. Test times vary depending on material type and particle size. Five minutes is typical, but some samples may be complete in as little as thirty seconds. Operating time can be set for up to 99.9 minutes. Sieving intensity (amplitude) is selected with a proportional power controller. Ramping function automatically increases power at a programmed rate for optimum separation of difficult materials. Programmable tapping is built into each unit and can be programmed for horizontal and vertical, vertical only, or turned off completely. Sample capacity is a function of particle size and material type. Larger particle samples may range up to 20g or about 7cc. Samples with maximum particle sizes of 38µm (No.400) should be about 10g or 4cc. For precision sieving with electroformed sieves down to 5µm, some samples may be as small as 1g. Sieves for the AutoSiever are purchased separately. The 3in (76mm) diameter clear acrylic-framed sieves are available with conventional woven-wire cloth or precision electroformed mesh. The AutoSiever will hold seven woven-wire or three precision electroformed sieves in the fixed-height stack assembly. Clear acrylic spacers are available if fewer sieves are desired. Fines are retained in a flexible-walled latex fines collector. A latex diaphragm on top of the stack seals the air column and confines the sample during testing. The complete stack assembly is held together with a column lock, inserted into the backlit testing chamber and quickly secured in place for testing. The cabinet is powder coated steel with a sliding acrylic door. Sieves are purchased separately. Operates on 115/230V, 50 or 60Hz (selectable) power supplies, 40 Watts maximum. Dimensions: 10x10x20in (254x254x508mm), WxDxH. Est. Ship Wt.: 62lb (28kg).

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“This siever will ship in excellent operational condition.”