Glassman PG030N32 -30kV 32mA DC High Voltage HV Power Supply NIST CALIBRATED, US $4,200.00 – Picture 0

Glassman PG030N32 -30kV 32mA DC High Voltage HV Power Supply NIST CALIBRATED, US $4,200.00 – Picture 1

Glassman PG030N32 -30kV 32mA DC High Voltage HV Power Supply NIST CALIBRATED, US $4,200.00 – Picture 2

Glassman Pg030n32 -30kv 32ma Dc High Voltage Hv Power Supply Nist Calibrated

US $4,200.00

Tottenham, Ontario, Canada
Jan 29th

Open on mobile:
QR code

This item is a new Glassman PG030N32 -30kV 32mA DC High Voltage HV Power Supply and will be NIST CALIBRATED. All pictures are of the actual unit. -30kV, 32mA. Glassman units are very rugged, made in USA. This item comes with a 6 Month (180 day) warranty. All functions are guaranteed to work or money will be refunded (buyer pays return shipping only). This item will include a 1 year NIST traceable CERTIFICATE of Calibration, documented in your name. We Calibrate multimeters, meggers, power supplies, calibrators, and many other products! Contact us for more information on Calibration. Features Air Insulated. As in all standard Glassman power supplies, the ER Series features "air" as the primary dielectric medium. No oil or encapsulation to impede serviceability or increase weight. Constant Voltage/Constant Current Operation. Automatic crossover from voltage or current regulated mode dependent on the load conditions. Low Ripple. Better than 0.02% of rated voltage at full load. Tight Regulation. Voltage regulation better than 0.005% line or load: current regulation better than 0.05% from short circuit to rated voltage. Fast Transient Response. Less than 3 milliseconds for a 50% load transient. Front Panel Controls (Analog and Digital Versions). Ten-turn voltage and current controls with locking vernier dials. AC power ON/OFF and high voltage enable switches. Remote Control Facilities.As standard, all ER Series power supplies provide output voltage and current program/monitor terminals, TTL high voltage enable/disable, safety interlock terminals, and a +10 volt reference source. Small Size and Weight. Specifications (From 5% to 100% rated voltage. All units operate down to zero output with very slight degradation of performance.) Input: 115 V RMS, 48-63 Hz single phase. Connector per IEC 320 with mating line cord. Efficiency: Typically 85% at full load. Output: Continuous, stable adjustment, from 0 to rated voltage or current by panel mounted 10-turn potentiometers with 0.05% resolution, or by external 0 + 10V signals is provided. Linearity is <1% of rated. Accuracy is 1% of rated + 1% of setting. Repeatability is <0.1% of rated. Voltage Regulation: <0.005% +1mV/mA, line and load. Ripple: <0.02% RMS of rated voltage +0.5V at full load; models 1.5kV and lower, 400mV (500mV Japan). Current Regulation: <0.05% from short circuit to rated voltage at any set current. Voltage Monitor: 0 to +10 V DC for zero to rated current. Accuracy, 1% of reading + .1% of rated voltage. Current Monitor: 0 to + 10 V DC for zero to rated current. Accuracy, 1% of reading + .05% of rated current. Stability: 0.01% per hour after 1/2 hour warm-up, 0.05% per 8 hours. Voltage Rise/Decay Time Constant: Typically 50 ms rise or decay time constant (300 ms for 75 kV model) using HV (on/off) or remote voltage control with 75% resistive load. Temperature Coefficient: 0.01%/°C. Ambient Temperature: -20 to +40°C operating, -40 to +85°C storage. Polarity: Negative with respect to chassis ground. Protection: Automatic current regulation protects against all overloads, including arcs and short circuits. Fuses, surge-limiting resistors, and low-energy components provide ultimate protection. Remote Controls: Common, +10 V reference, interlock, current monitor, current program, voltage monitor, voltage program, TTL, and ground, provided on a rear panel mounted terminal block. External Interlock: Open off, closed on. Normally latching except for blank front panel version where it is non-latching. Any questions or clarifications, feel free to ask We accept VISA / Mastercard by phone, mail, or email. Paypal is also accepted. International Buyers – Please Note: Import duties, taxes, and charges are not included in the item price or shipping cost. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding or buying. UPS/FedEx brokerage charges are typically higher than Canada Post/USPS/local post office. Will ship worldwide. We make our best efforts to get you the best shipping prices. Contact us for other international rates and we will be pleased to give you a quote. Sales to within Canada are subject to 5% GST. Ontario sales subject to 13% HST.

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Unit is brand new, old stock - comes in original Glassman box. Will be NIST calibrated for you.”