Glue Bison Liquid Rubber 50 Ml Flexible, Strong Repair Paste

US $40

Novosibirsk, Russian Federation
May 29th

Open on mobile:
QR code

Glue Bison Liquid Rubber 50 ml flexible, strong repair paste Product description Repairing paste for repairing, protecting and waterproofing 1001 objects. Field of application Ideal for glueing, filling and sealing of rubber, leather, textile, neoprene, various synthetics (such as Hypalon®), wood, metal or ceramics. Also suitable for repairing (sports) shoes, (soles and heels), boots, gloves, slippers, (hockey) sticks, inflatable objects (such as boats, air mattresses) made of rubber or soft PVC, rainwear, travel bags, wetsuits, diving gear, tents, (horse) saddles, decorative materials, headlights and to reinforce stitched seams. Also suitable for filling joints and gaps. Not suitable for Polypropylene (PP), Polyethylene (PE) and P.T.F.E. Properties · Strong · Waterproof · Remains flexible · Universal · Filling · Resistant to chemicals · Weatherproof · Temperature resistant from - 40°C to + 120°C · Transparent Preparation Working conditions: Do not use at temperatures below +5 °C or at an extremely low relative air humidity. Surface requirements: Materials to be repaired should be dry through and through. Preliminary surface treatment: All parts should be perfectly clean and free of grease. Always roughen with enclosed sand paper. Tools: Sand paper and spatula (enclosed for free). Application Directions for use: Use spatula to apply paste in an even layer of at least 2 mm well around area to be repaired (preferably on entire surface). Smoothen paste with spatula. Repairing shoe soles and rubber boats: materials should be perfectly clean and dry through and through. Always sandpaper well. Apply a thin layer of paste (less than 1 mm). Press the enclosed polyester gauze (min. width of 2,5 cm) into paste using enclosed spatula. Apply a thin layer of paste on and around gauze. Smoothen with spatula and a little washing-up liquid. Let cure for at least 48 hours. Stains/residue: Remove fresh stains immediately with acetone. Dried adhesive residue can only be removed mechanically. Points of attention: When cap is stuck, hold under hot water tap and unscrew. Remove any cured paste in cap with a sharp knife. Bison Rubber Repair cures under the influence of air humidity. As a result, a slight foaming may occur. A low air humidity level could slow down the curing process. Cure times Skin over time: approx. 10-30 minutes Dry/Cure time: approx. 48 hours * Curing time may vary depending on a.o. surface, product quantity used, humidity level and ambient temperature. Technical properties Moisture resistance: Very good Water resistance: Good Temperature resistance: from -40°C to +120°C UV resistance: Good Chemicals resistance: Good Elasticity: Very good Filling capacity: Very good Technical specifications Chemical base: MS-Polymer Colour: Transparent Viscosity: approx. 125 mPa.s. Store in a dry, cool and frost-free place. We shipping worldwide with tracking. Thank you for viewing and shopping!