+ Post new Ad
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 0
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 1
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 2
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 3
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 0
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 1
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 2
GMT Air Cooled CNC Spindle 0.8 kW 220v W/ 1hp 120v Lenze VFD, US $700.00 – Picture 3

Gmt Air Cooled Cnc Spindle 0.8 Kw 220v W/ 1hp 120v Lenze Vfd

US $700.00

  • Thiensville, Wisconsin, United States
  • Mar 10th
Open on mobile:
QR code
I have for sell a brand new .8kw/1hp air cooled Ugra CNC Spindle that comes with an 120v/220v Lenze ACtech VFD. The vfd is enclosed in an electrical panel that has a LCD on the front that shows you the RPM and allows you to control the spindle speed. Plus it has start/stop buttons and a emergency stop switch. You can also hookup the vfd to your cnc board to control the spindle through Mach3 software. The vfd is programmed for the spindle so it's ready to go. Here are the specs for the spindle: Dimensions: OD: 65mm (2.559") L: 300mm (12") Power: 0.8 kW (1 HP) Voltage: 220V 3 Phase (Inverter Output Voltage) Current 3.6A Frequency: 0~400 Hz Speed: 0~24000 RPM stepless. Working speed: 6000-24000 RPM ER11 collet Grease Lubrication Runout off: less than 0.02mm (0.001") Noise level: 77dBA Air Cooling Weight: 3 kg (7 lbs) I have a custom made mount for the spindle, two ER11 1/8" collets and one ER11 1/4" collet that will be included. The spindle has never been used to cut anything.  It was just powered up to make sure it works.  This package deal is worth more than $1000.  
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Spindle was never used to cut anything. It was just ran for a couple of minutes to make sure the vfd was programmed right.”

Directions

Similar products from Shafts

Spindle liner Mazak QT100, for 1/38 stock, Made in Ca, please read notes

Spindle liner Mazak QT100, for 1/38 stock, Made in Ca, please read notes

  • Huntington Beach, California, United States
  • Mar 25th
Okuma Cadetmate spindle

Okuma Cadetmate spindle

  • Spencerport, New York, United States
  • Mar 25th
CNC MILL ENGRAVING/GRINDING AIR COOLED 2.2KW SPINDLE MOTOR ER20 FOUR BEARING

CNC MILL ENGRAVING/GRINDING AIR COOLED 2.2KW SPINDLE MOTOR ER20 FOUR BEARING

  • Door to door service shanghai, China
  • Mar 25th
FOUR BEARING 0.8KW WATER COOLED SPINDLE MOTOR AND DRIVE FREQUENCY INVERTER VFD

FOUR BEARING 0.8KW WATER COOLED SPINDLE MOTOR AND DRIVE FREQUENCY INVERTER VFD

  • Door to door service,shanghai, China
  • Mar 25th
FOUR BEARING 1.5KW WATER COOLED SPINDLE MOTOR ER16&VFD FREQUENCY DRIVE INVERTER

FOUR BEARING 1.5KW WATER COOLED SPINDLE MOTOR ER16&VFD FREQUENCY DRIVE INVERTER

  • Door to door service shanghai, China
  • Mar 25th
SPINDLE DRIVE C AXIS TGX MACHINE

SPINDLE DRIVE C AXIS TGX MACHINE

  • Wixom, Michigan, United States
  • Mar 25th
NOS Prairie #503 Motor Shaft Arbor Fits 1/2" Shaft

NOS Prairie #503 Motor Shaft Arbor Fits 1/2" Shaft

  • Paducah, Kentucky, United States
  • Mar 25th
Reversible Tapping Attachment, Tapping Attachment, Tapping Tool

Reversible Tapping Attachment, Tapping Attachment, Tapping Tool

  • Kapurthala, Punjab, India
  • Mar 25th
Hurco Weiss 176506-0125 CNC Spindle Head, HTX500, Winmax PCB Spindle Control

Hurco Weiss 176506-0125 CNC Spindle Head, HTX500, Winmax PCB Spindle Control

  • Hopkins, Minnesota, United States
  • Mar 25th
Lovejoy Wheelhub

Lovejoy Wheelhub

  • Santa Ana, California, United States
  • Mar 10th
BONEHAM Precision Spindle - Type FB421 - 10,000RPM

BONEHAM Precision Spindle - Type FB421 - 10,000RPM

  • Franklin, Kentucky, United States
  • Mar 10th
Zero Spindle Model AD-015 with Collet Adapter and Collets Machinist toolmaker

Zero Spindle Model AD-015 with Collet Adapter and Collets Machinist toolmaker

  • Punta Gorda, Florida, United States
  • Mar 9th
Whitnon High Speed Precision Spindle

Whitnon High Speed Precision Spindle

  • Santa Ana, California, United States
  • Mar 8th
Excellon 1010 spindle

Excellon 1010 spindle

  • Elgin, Illinois, United States
  • Mar 5th
Red Head grinding spindle pulleys grinder headhead

Red Head grinding spindle pulleys grinder headhead

  • Roseville, Michigan, United States
  • Mar 4th
5/8" Motor Arbor for Grinding, Buffing, Wire Wheels

5/8" Motor Arbor for Grinding, Buffing, Wire Wheels

  • Nerstrand, Minnesota, United States
  • Mar 3rd
GMN Spindle HCS 230 - 18000 High frequency Motor and Cooling system

GMN Spindle HCS 230 - 18000 High frequency Motor and Cooling system

  • Plovdiv, Kichuk Paris, Bulgaria
  • Mar 2nd
NEW PMC 40 Taper 12,000 RPM Spindle (has minor damage)

NEW PMC 40 Taper 12,000 RPM Spindle (has minor damage)

  • Buckner, Missouri, United States
  • Mar 1st
Lot of 2 Excellon Quiet Drill 1010 1HP 80,000 RPM along with a Spindle Assembly

Lot of 2 Excellon Quiet Drill 1010 1HP 80,000 RPM along with a Spindle Assembly

  • United States
  • Feb 27th
Redsail JGD-F65A-800 220VAC 24000RPM 800W CNC High Power Spindle Router Motor

Redsail JGD-F65A-800 220VAC 24000RPM 800W CNC High Power Spindle Router Motor

  • Milpitas, California, United States
  • Feb 27th

People who viewed this item also vieved

CARBOLOY 3/4" & LYNDEX 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

CARBOLOY 3/4" & LYNDEX 1" ENDMILL TOOL HOLDERS w/ CAT40 SHANKS

  • Covina, California, United States
  • Mar 6th
Kennametal CV40EM018450 3/16" Diameter End Mill Holder CAT 40 Taper

Kennametal CV40EM018450 3/16" Diameter End Mill Holder CAT 40 Taper

  • Bellingham, Washington, United States
  • Mar 6th
HERTEL E10MSWUPR3 5/8" Shank Screw-On Boring Bar FREE SHIPPING

HERTEL E10MSWUPR3 5/8" Shank Screw-On Boring Bar FREE SHIPPING

  • Chicago, Illinois, United States
  • Mar 9th
HERTEL E06MSWUPR2 3/8" Shank Screw-On Boring Bar FREE SHIPPING

HERTEL E06MSWUPR2 3/8" Shank Screw-On Boring Bar FREE SHIPPING

  • Chicago, Illinois, United States
  • Mar 9th
VARDEX INDEXABLE THREADING BAR 3/4" SHANK NVR-0375-2 + 2 NEW CARBIDE INSERTS

VARDEX INDEXABLE THREADING BAR 3/4" SHANK NVR-0375-2 + 2 NEW CARBIDE INSERTS

  • Ellington, New York, United States
  • Mar 11th
NEW TUNGALOY INDEXABLE FACING TOOL HOLDER 1" X 6" MWLNR16-4D USA CARBIDE INSERT

NEW TUNGALOY INDEXABLE FACING TOOL HOLDER 1" X 6" MWLNR16-4D USA CARBIDE INSERT

  • Ellington, New York, United States
  • Mar 11th
1pc MT2 to MT4 Morse Taper Adapter Reducing Drill Sleeve

1pc MT2 to MT4 Morse Taper Adapter Reducing Drill Sleeve

  • China, China
  • Mar 25th
1pc MT1 to MT4 Morse Taper Adapter Reducing Drill Sleeve

1pc MT1 to MT4 Morse Taper Adapter Reducing Drill Sleeve

  • China, China
  • Mar 25th
HARD PRESS DRILL BUSHINGS FIT FOR MACHINIST TOOL & DIE JIG FIXTURE.

HARD PRESS DRILL BUSHINGS FIT FOR MACHINIST TOOL & DIE JIG FIXTURE.

  • Portland, Oregon, United States
  • Mar 29th
3/4" press fit drill bushing 1" (1.000) OD - 1/2" (0.500) long

3/4" press fit drill bushing 1" (1.000) OD - 1/2" (0.500) long

  • Unionville, Pennsylvania, United States
  • Mar 29th
Dorian Tool ER11 Alloy Steel Ultra Precision Collet, 0.230" - 0.250" Hole Size

Dorian Tool ER11 Alloy Steel Ultra Precision Collet, 0.230" - 0.250" Hole Size

  • USA, United States
  • May 24th
Dorian Tool CAT40 Shank Alloy Steel 8620 Shell Mill Holder, 1.75" Projection,

Dorian Tool CAT40 Shank Alloy Steel 8620 Shell Mill Holder, 1.75" Projection,

  • USA, United States
  • May 24th
Command 1/2" End Mill Style Tool Holder BT40

Command 1/2" End Mill Style Tool Holder BT40

  • Brownsburg, Indiana, United States
  • May 24th
Command BT40 1" End Mill Style Tool Holder

Command BT40 1" End Mill Style Tool Holder

  • Brownsburg, Indiana, United States
  • May 24th
LOT OF 2 SPV QUICK CHANGE WITH T12 3/8 TAP COLLETS LOC2349

LOT OF 2 SPV QUICK CHANGE WITH T12 3/8 TAP COLLETS LOC2349

  • Sidney, Ohio, United States
  • Jun 2nd
KENNAMETAL KM 40 TURRET BLOCK CLAMPING UNIT OKUMA

KENNAMETAL KM 40 TURRET BLOCK CLAMPING UNIT OKUMA

  • Coloma, Wisconsin, United States
  • Jun 2nd
Universal drill chuck keys by stone

Universal drill chuck keys by stone

  • Cincinnati, Ohio, United States
  • Jun 2nd
Makita Keyless 1/2" Drill Chuck, #192692-0, for Makita hammer drills

Makita Keyless 1/2" Drill Chuck, #192692-0, for Makita hammer drills

  • Tallmadge, Ohio, United States
  • Jun 2nd
Sunnen Mandrel 1PL-1750 Honing Unit

Sunnen Mandrel 1PL-1750 Honing Unit

  • Dayton, Ohio, United States
  • Jun 9th
Sunnen AL20-744LA Hone Mandrel w/LAC shoes

Sunnen AL20-744LA Hone Mandrel w/LAC shoes

  • Plymouth, Indiana, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies