+ Post new Ad
GN1170 Pin Chuck Set +3 Collets 0mm to 2.5mm Drill Bits Suit Lathe Vice & Drills, GBP 6.48 – Picture 0
GN1170 Pin Chuck Set +3 Collets 0mm to 2.5mm Drill Bits Suit Lathe Vice & Drills, GBP 6.48 – Picture 0

Gn1170 Pin Chuck Set +3 Collets 0mm To 2.5mm Drill Bits Suit Lathe Vice & Drills

GBP 6.48

  • Birmingham, United Kingdom
  • Jan 30th
Open on mobile:
QR code
GN1170 Pin Chuck Set +3 Collets 0mm to 2.5mm Drill Bits Suit Lathe Vice & Drills Details: Pin Chuck Holds Small Drill Bits Ideal Lathe & Drill, Suit Eclipse & Expo. These Pin Chucks Are like Eclipse and Expo just a  fraction of the cost. Designed for holding small tools, drills, burrs or small taps in a Lathe or Drill. Simple instructions: 1) Insert a drill bit into the Pin chuck and tighten up. 2) The Pin Chuck shaft is then simply inserted into your normal drill chuck and then tightened up as normal.   This Pin Chuck Set has a standard size 1/4 " shaft so it will fit all chucks that will accept a standard 1/4 " shaft. The pin chuck is a useful accessory for holding drills too small to be held by standard capacity drill chucks. Supplied with three collets of the following sizes: 0 - 0.75mm (0 - 1/32 in). 0.75 - 1.5mm (1/32 - 1/16 in). 1.5 - 2.5mm (1/16 - 3/32 in). Actual Pin Chuck dimensions, Pin Chuck total length = 56mm. Pin Chuck body width = 13mm. Pin Chuck drive diameter = 6mm. Check out my other items! Be sure to add me to your favourites list! Great addition to any one tool set. Business seller information Gntools Ltd Contact details Ben Matthews Unit 1, 146-156 Weston Lane. Birmingham West Midlands B11 3RX United Kingdom Phone:07927|066836 Email:mandyjoyce69@hotmail.co.uk Return policy After receiving the item, contact seller within Return shipping 14 days Buyer pays return shipping Return policy details All our items can be returned if found to be faulty within 14 days or not as described. 7 days full refund upon receiving the original item back, please contact us if you have a problem. Very occasionally items are lost in the post, again we will arrange for a suitable replacement to be sent, but first we ask you to wait up two weeks from the date of payment to be certain the original item was in fact lost, royal mail will not open our claim until this time.

Directions

Similar products from Lathe Chucks

7 7/8" DIA ANTIQUE SKINNER LATHE CHUCK 2 5/8" x 4 TPI

7 7/8" DIA ANTIQUE SKINNER LATHE CHUCK 2 5/8" x 4 TPI

  • Hillsborough, New Jersey, United States
  • Jan 30th
8" DIA CUSHMAN SOUTH BEND 14 1/2" OR 16" LATHE CHUCK 2 3/8" x 6 TPI

8" DIA CUSHMAN SOUTH BEND 14 1/2" OR 16" LATHE CHUCK 2 3/8" x 6 TPI

  • Hillsborough, New Jersey, United States
  • Jan 30th
7 1/2" DIA SKINNER SOUTH BEND 13" LATHE CHUCK 1 7/8" x 8 TPI

7 1/2" DIA SKINNER SOUTH BEND 13" LATHE CHUCK 1 7/8" x 8 TPI

  • Hillsborough, New Jersey, United States
  • Jan 30th
8 1/4" DIA UNION LATHE CHUCK L00 LOGAN SOUTH BEND ROCKWELL HARDINGE ETC.

8 1/4" DIA UNION LATHE CHUCK L00 LOGAN SOUTH BEND ROCKWELL HARDINGE ETC.

  • Hillsborough, New Jersey, United States
  • Jan 30th
7 1/2" DIA BURNERD UK LATHE CHUCK L00 LOGAN SOUTH BEND ROCKWELL HARDINGE ETC.

7 1/2" DIA BURNERD UK LATHE CHUCK L00 LOGAN SOUTH BEND ROCKWELL HARDINGE ETC.

  • Hillsborough, New Jersey, United States
  • Jan 30th
Buck Chuck 7-1/2" Scroll Tru TRUE Ajust 6 Jaw Lathe Chuck # 4761 W/ L00 Mount

Buck Chuck 7-1/2" Scroll Tru TRUE Ajust 6 Jaw Lathe Chuck # 4761 W/ L00 Mount

  • San Diego, California, United States
  • Jan 30th
VERY NICE 8" 3 JAW POWER CHUCK HOLLOW CENTER 4750 RPMS MAX

VERY NICE 8" 3 JAW POWER CHUCK HOLLOW CENTER 4750 RPMS MAX

  • Rochester, New York, United States
  • Jan 30th
Dexter Valve Grinder 3 Jaw Chuck 6” Leavitt Machine Co

Dexter Valve Grinder 3 Jaw Chuck 6” Leavitt Machine Co

  • Unionville, Pennsylvania, United States
  • Jan 30th
NEW TOOL MAKERS INTERNATIONAL CEO200-0248C SEAMING CHUCK D329360

NEW TOOL MAKERS INTERNATIONAL CEO200-0248C SEAMING CHUCK D329360

  • Delta, Ohio, United States
  • Jan 30th
6" 3 jaw Buck Adjust Tru Chuck for south bend, logan, craftsman, Sheldon

6" 3 jaw Buck Adjust Tru Chuck for south bend, logan, craftsman, Sheldon

  • Raymond, Ohio, United States
  • Jan 30th
BISON 7-874-108 BACK PLATE 10" TYPE A

BISON 7-874-108 BACK PLATE 10" TYPE A

  • Joliet, Illinois, United States
  • Jan 30th
Manual Lathe Chuck Self Centering Nominal Size 8 3 Jaws Cast Iron Body |KR3|

Manual Lathe Chuck Self Centering Nominal Size 8 3 Jaws Cast Iron Body |KR3|

  • Saint Louis, Missouri, United States
  • Jan 30th
Bison 7-804-1044 - BISON BR.10 INCH L-2 3 JAW CH.UNIVERSAL L SPIN ( 3255-10-L2)

Bison 7-804-1044 - BISON BR.10 INCH L-2 3 JAW CH.UNIVERSAL L SPIN ( 3255-10-L2)

  • Naperville, Illinois, United States
  • Jan 30th
A2Z Steel Chuck Jaws for Taig LCJST1060 Chuck - Set of 4 - Made in the USA

A2Z Steel Chuck Jaws for Taig LCJST1060 Chuck - Set of 4 - Made in the USA

  • Englewood, Colorado, United States
  • Jan 30th
Jacobs Chuck Ball Bearing Super Chuck K3 Key Size 3JT Mounting Female 30221 *

Jacobs Chuck Ball Bearing Super Chuck K3 Key Size 3JT Mounting Female 30221 *

  • Hollywood, Florida, United States
  • Jan 30th
Anorad/ Micro Slides 6" Motorized Rotary Stage

Anorad/ Micro Slides 6" Motorized Rotary Stage

  • Dallas, Texas, United States
  • Jan 30th
TRU-AX Adjustable Drill Chuck Centering Device

TRU-AX Adjustable Drill Chuck Centering Device

  • North Kingstown, Rhode Island, United States
  • Jan 30th
234B Cushman 10" 3 Jaw Lathe Scroll Chuck 2-3/8"-8 Mount

234B Cushman 10" 3 Jaw Lathe Scroll Chuck 2-3/8"-8 Mount

  • Athens, Georgia, United States
  • Jan 30th
UNION 15" 4 JAW LATHE CHUCK L0 MOUNT

UNION 15" 4 JAW LATHE CHUCK L0 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
5-1/2" L00 BACK PLATE FOR 3, 4 And 6 JAW LATHE CHUCK - 2-1/8" HOLE THRU

5-1/2" L00 BACK PLATE FOR 3, 4 And 6 JAW LATHE CHUCK - 2-1/8" HOLE THRU

  • San Diego, California, United States
  • Jan 30th

People who viewed this item also vieved

Used 1-1/64" / 25.80mm Erikson 400DA Collet *583*

Used 1-1/64" / 25.80mm Erikson 400DA Collet *583*

  • Tekamah, Nebraska, United States
  • May 24th
Used 1" Kennametal 400DA 1000 Collet *585*

Used 1" Kennametal 400DA 1000 Collet *585*

  • Tekamah, Nebraska, United States
  • May 24th
Used 1" Erikson 400DA Collet *591*

Used 1" Erikson 400DA Collet *591*

  • Tekamah, Nebraska, United States
  • May 24th
Adjustable Tilt Tilting Milling Table Mill 10" x 15"

Adjustable Tilt Tilting Milling Table Mill 10" x 15"

  • Lake Forest, California, United States
  • May 24th
Hardinge 1/2" Turret Plate 4 Station for CHNC II Lathe

Hardinge 1/2" Turret Plate 4 Station for CHNC II Lathe

  • Gardena, California, United States
  • May 24th
Suburban Tool Collet Master Spin Index Fixture

Suburban Tool Collet Master Spin Index Fixture

  • Henrico, Virginia, United States
  • May 25th
Destaco 807-u Pneumatic Hold Down Clamp

Destaco 807-u Pneumatic Hold Down Clamp

  • Davenport, Iowa, United States
  • May 26th
De-Sta-Co DE-STA-CO 81L25-10100 Miniature Design Automation Power Clamp

De-Sta-Co DE-STA-CO 81L25-10100 Miniature Design Automation Power Clamp

  • USA, United States
  • May 26th
De-Sta-Co DE-STA-CO 802-U Pneumatic Hold Down Clamp

De-Sta-Co DE-STA-CO 802-U Pneumatic Hold Down Clamp

  • USA, United States
  • May 26th
6 INCH ALUMINUM SOFT VISE JAWS WITH MAGNET (3900-2149)

6 INCH ALUMINUM SOFT VISE JAWS WITH MAGNET (3900-2149)

  • Chino, California, United States
  • May 27th
1 INCH PRECISION PARALLEL SCREWLESS VISE WITH STEP JAWS (3900-0124)

1 INCH PRECISION PARALLEL SCREWLESS VISE WITH STEP JAWS (3900-0124)

  • Chino, California, United States
  • May 27th
4 INCH HEAVY DUTY CROSS SLIDE VISE WITH METRIC DIAL (3900-2704)

4 INCH HEAVY DUTY CROSS SLIDE VISE WITH METRIC DIAL (3900-2704)

  • Chino, California, United States
  • May 27th
Machinist BENCH CENTER METAL WORKING PRECISION FIXTURE

Machinist BENCH CENTER METAL WORKING PRECISION FIXTURE

  • Naperville, Illinois, United States
  • May 28th
Machinist BENCH CENTER 14" METAL WORKING PRECISION ITEM ALUMINUM

Machinist BENCH CENTER 14" METAL WORKING PRECISION ITEM ALUMINUM

  • Naperville, Illinois, United States
  • May 28th
RSK ? BENCH CENTER 18" METAL WORKING PRECISION ITEM NO. 561 NO. 5

RSK ? BENCH CENTER 18" METAL WORKING PRECISION ITEM NO. 561 NO. 5

  • Naperville, Illinois, United States
  • May 28th
Giddings Lewis 240-4836-007 Clamping Jaw

Giddings Lewis 240-4836-007 Clamping Jaw

  • Peoria, Illinois, United States
  • Jun 4th
Giddings & Lewis 220-5614-009 "V" Jaw

Giddings & Lewis 220-5614-009 "V" Jaw

  • Peoria, Illinois, United States
  • Jun 4th
Mini Brass Fingers MP-02B4 4PC Set for Mini Omni Bar

Mini Brass Fingers MP-02B4 4PC Set for Mini Omni Bar

  • Venice, Florida, United States
  • Jun 4th
Used Haas SC01 Servo Control Box Programmable Single Axis White Brush

Used Haas SC01 Servo Control Box Programmable Single Axis White Brush

  • Schaumburg, Illinois, United States
  • Jun 7th
Fibro Index Table 2000mm w/ 8-station low profile main base, FIBROTAKT, 10.36.10

Fibro Index Table 2000mm w/ 8-station low profile main base, FIBROTAKT, 10.36.10

  • Jackson, Michigan, United States
  • Jun 7th
Weiss TC-700-T Rotary Index Table Control Cabinet w/ Lenze E82EV301_4C & PLC

Weiss TC-700-T Rotary Index Table Control Cabinet w/ Lenze E82EV301_4C & PLC

  • San Jose, California, United States
  • Jun 7th
MACHINIST TOOLS LATHE MILL Machinist Lot of Brass

MACHINIST TOOLS LATHE MILL Machinist Lot of Brass

  • Morris Plains, New Jersey, United States
  • Jun 9th
Toolmaker Precision Micro Adjustable Angle V Vee Block 30° - 0° - 60° MILL LATHE

Toolmaker Precision Micro Adjustable Angle V Vee Block 30° - 0° - 60° MILL LATHE

  • Chino, California, United States
  • Jun 9th
MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Block s Clamps Set Up

MACHINIST TOOLS LATHE MILL Machinist Lot of Hold Down Block s Clamps Set Up

  • Morris Plains, New Jersey, United States
  • Jun 9th
Dover Publications-What To Doodle? Jr. Animals!

Dover Publications-What To Doodle? Jr. Animals!

  • Hickory Hills, Illinois, United States
  • Jun 11th
"Bamboo Single Pointed Needles 10""-Size 1/2.25mm"

"Bamboo Single Pointed Needles 10""-Size 1/2.25mm"

  • Hickory Hills, Illinois, United States
  • Jun 11th
Martha Stewart Frame Border Punch Cartridge-Compass Geo

Martha Stewart Frame Border Punch Cartridge-Compass Geo

  • Hickory Hills, Illinois, United States
  • Jun 11th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies