Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 0

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 1

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 2

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 3

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 4

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 5

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 6

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 7

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 8

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 9

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 10

Graco Pro 4500SC 85kv Electrostatic Paint Spray Gun / System, US $4,104.00 – Picture 11

Graco Pro 4500sc 85kv Electrostatic Paint Spray Gun / System

US $4,104.00

Manchester, Connecticut, United States
Jan 31st

Open on mobile:
QR code

Graco Pro 4500 SC Used / Refurbished 85kv Electrostatic Spray Gun / System Used for spray application of liquid solvent based paints The spray gun is used but is in exceptional condition and has been used very little as the pictures show. This is a complete electrostatic spray system! All you need to do is supply the clean, dry compressed air and the paint. If you have never used electrostatic equipment then you WILL also need to learn how to use it. This system is comprised of the following components: 1 - Graco Pro4500SC spray gun - refurbished & tested 1 - Brand new 2-1/2 quart remote paint tank 1 - Brand new 78"-80"paint hose 1 - Brand new 78"-80" static grounded air hose w/left hand fitting for gun air connection. 1 - Brand new 50' Binks air supply hose with integral static ground wire built into the hose itself with a 25' length ground wire crimped to the end of the air hose where you would attach the hose to your air supply. I have added a brand new 50' foot length of Binks static grounded air hose to this system. This alleviates the need to have a ground wire running from the 2-1/2 quart paint tank to the active earth ground along with your air supply hose. By having the air hose with the static ground wire then the only thing necessary is the 50' air supply hose because of its grounding ability. You simply attach the eye connector located on the end of the 25' green ground wire (crimped to the air hose end) to the earth ground. NOTE: THIS SAME GUN IS BEING OFFERED IN ANOTHER LISTING OF MINE BUT WITHOUT THE 50' GROUNDED AIR HOSE. When one of these two listings sells I will end the other listing. THIS IS NOT AN AIRLESS SPRAY GUN This is a used Graco Pro4500 electrostatic spray gun. The gun was completely disassembled, meticulously cleaned and reassembled using a new front barrel & fluid nozzle. All the packing's, "O" rings and PTFE seals have been lubricated according to the manufacturers specifications during the reassembly. I tested the kv output as well as all the controls and the spray pattern. This gun performs exactly as one right out of the box does. I personally use both 4500SC and 3500SC spray guns for refinishing turbine helicopters. I have been using the same two guns for the past thirteen years, neither gun has needed ANY parts to be replaced and they both work perfectly fine. Just because the 4500SC is no longer made by Graco is no reason to be concerned, as long as you take care of it and clean it thoroughly it should give you dependable service for a long time as mine have and still do. We use these electrostatic spray guns to apply epoxy primers, 2k urethane primers, base coat colors, both solids and metallics and urethane clear coats. It is amazing to see how nice pale gold metallics lay out. The Graco tech reps that I have spoken with in the past have told me that that these cannot be used with metallic paints because it causes to metallic particles to "orient" themselves......so much for what they know. I have used the Pro3500 & 4500SC guns with many different paints and colors, both single stage and base coat/clear coat two stage paints having metallic particles and I can say from experience that the metallic lays out or should I say "orients" itself very nicely and uniformly, much better than with ANY HVLP, DeVilbiss or Binks spray guns that I have used over the past 33 years custom painting helicopters, airplanes, yachts, motor coaches, hot rods, antique, late model & exotic automobiles. Anybody that thinks HVLP can give you similar transfer rates is simply clueless or delusional, HVLP does not come anywhere close...........unless you have no idea what you are doing with electrostatic equipment and it is being used incorrectly. These spray guns are amazing and have saved me a small fortune just in paint savings not to mention reduced labor cost due to less time required to apply the paint. Just to be able to spray large items like buses and helicopters and NOT have to watch a cloud of paint get drawn into the exhaust is very nice, specially when the base colors cost $600 per gallon. I sold two of these set ups to a guy in Arizona the other was a 3500sc. He told me that when he was using HVLP guns he went through 45-60 gallons of paint per week painting new wrought iron fences that he fabricates. With the electrostatic spray guns he now only uses 10 gallons of the same paint to paint the same number of fence sections that previously required 45-60 gallons per week. That’s just in less paint consumption; his labor to apply coatings is a fraction of what it was. You don’t have to be Einstein to figure how much $$ was going into the filters of his spray booth, it now goes into his pocket. Just to be conservative, 40 gallons of cheap acrylic enamel is going to cost you at least $60 per gallon. That’s $2400.00 bucks PER WEEK in savings $$$. So, you think these toys are expensive, well, they are, but if you are spraying substantial quantities of paint per week you can recover your money in a relatively short period of time……then, what $$ you don’t give to your paint supplier can go into your pocket. I have NEVER met a paint supplier that had anything good to say about electrostatic spray systems……..gee, I wonder why. Start reducing your paint usage by 40-70% and see how happy your paint supplier(s) are. Forget all that HVLP junk, if you want transfer efficiency and a high quality atomized spray then this is the way to go. I have always been a Binks Model 7 fan since getting into this industry back in the late 70’s but these Graco guns spray every bit as nice as any Binks or DeVilbiss gun I've ever used. These Graco electrostatic guns are the only spray guns that we use for painting anything requiring more than a 1/2 pint of paint. If you are painting objects like truck & car frames, bicycle or motorcycle frames, pipes, metal fencing and unusual shaped objects you can actually see the paint being drawn to and wrapping around the object being painted. You will be amazed how much less paint material it takes to apply a finish to metal objects with these guns. I have a lot of these guns in assorted models as well as Stainless paint tanks. If you need a system tailored to your specific application then contact so that I can make the appropriate recommendations. I make up these 2-1/2 Qt remote tank set ups. You can’t get a short Graco grounded air hose with that funky left hand thread fitting, SO I MAKE THEM, I machine that little left hand thread fitting that Graco will not sell and I use a very expensive crimping machine to fasten the fittings to the hose ends. I also test the grounding capacity of the air hose where it attaches to the gun back to the end of the ground wire. ALSO, anyone in need of an air hose that has the static ground wire built into it, similar to the Graco hose, I can make up any length and install the left hand thread air fitting for substantially LESS than what it will cost you from a Graco dealer, it will also have the 25' ground wire attached to the opposite end just like the OEM Graco hose. Keep looking on ebay most likely you will see me list one just to compete with the few that you see listed here. TRAINING IS NOT INCLUDED WITH THE PURCHASE OF ANY OF THESE SYSTEMS. I AM MORE THAN HAPPY TO ANSWER QUESTIONS ......WITHIN REASON, BUT DO NOT EXPECT TO ME TO SPEND HOURS ON THE PHONE EXPLAINING HOW TO USE THIS EQUIPMENT. IF YOU DO NOT KNOW ANYTHING ABOUT THIS TYPE OF EQUIPMENT, I OFFER TRAINING BUT, AS WITH ANY WORTHWHILE EDUCATION, THERE IS A TUITION FEE. YOU CAN LEARN MORE IN ONE DAY OF TRAINING THAN SPENDING YOUR TIME TRYING TO FIGURE OUT WHAT TO DO, HOW TO DO IT AND WHAT NOT TO DO. The 2-1/2Qt remote paint tank & hoses are brand new / never been used. The static ground air hose is brand new and are made up for each unit sold. I manufacture the Left hand threaded grounded air hose fitting that is required to connect the air to the spray gun and are tested for continuity. Both the grounded air hose and paint fluid hose are approximately 78-80" long I assemble each system as they are purchased and test the spray gun for spray pattern adjustment, quality of spray, air & fluid leaks and kv power output of the electrostatics. I also test the air regulator on the remote paint tank for function. I do not sell junk, every unit I have sold I would not hesitate to use myself. No warrantees are made either expressed or implied. All representations, comments, statements & opinions are made from actual experience & use with this equipment. The boxed spray system weighs 16lbs. Box dimensions are 16” x 12” x 12” This item will be shipped by UPS Ground delivery requiring an adult signature. Due to the value of this equipment Insurance on the shipping will be required. The cost of insurance is $54.00 and will be charged as a handling fee since neither ebay or UPS have a way to add it during the checkout process. The $54 is part of the $4104.00 price Payment is due within (5) five days unless prior arrangements are made or non-paying bidder will be filed with Ebay. IF YOU HAVE QUESTIONS PLEASE ASK PRIOR TO MAKING ANY BIDS OR OFFERS 8607481424 Scott INTERNATIONAL BIDDERS WILL BE REQUIRED TO PAY ALL IMPORT/EXPORT FEES, CUSTOMS & DUTY FEES, AND ALL ADDTIONAL FEES ASSOCIATED WITH SHIPPING INTERNATIONALLY. ADDITIONAL PACKAGING IS REQUIRED TO INSURE THEIR PROTECTON FROM DAMAGE DURING SHIPPING. INTERNATIONAL BUYERS MUST WAIT FOR ME TO SEND THEM AN INVOICE ITEMIZING THE COST TO PURCHASE. An acceptable method of payment is Paypal. I prefer payment by bank wire because of the ridiculous paypal fees......I will even pay the bank wire fee. This will also allow for same day shipping Monday through Friday when possible. Other payment options are available, contact me to discuss. Auction price and payment is US Dollars. Only serious bidders bid please. Thanks for looking and bidding. Good Luck

Condition	Seller refurbished : An item that has been restored to working order by the eBay seller or a third party not approved by the manufacturer. This means the item has been inspected, cleaned, and repaired to full working order and is in excellent condition. This item may or may not be in original packaging. See the seller’s listing for full details.
Seller Notes	“The only appearance of wear from use is the fluid tube that goes from the handle base to front of the barrel. The front barreled brand new. The rear handle portion is used but looks virtually brand new. Electrostatics & controls function & work normally.”