+ Post new Ad
Granite MICRO-FLAT Surface Plate / Table 36 X 36 X 6 with 4 clamping ledges., US $3200 – Picture 0
Granite MICRO-FLAT Surface Plate / Table 36 X 36 X 6 with 4 clamping ledges., US $3200 – Picture 0

Granite Micro-flat Surface Plate / Table 36 X 36 X 6 With 4 Clamping Ledges.

US $3200

  • Morrisville, Pennsylvania, United States
  • Oct 27th
Open on mobile:
QR code
PRICE REDUCED TO SELL!  (Was $550.)  The table is in good condition, comes with an original heavy duty “Micro Flat” support frame with leveling screws, and weighs approximately 800-900 lbs. combined.  The height gauge and blocks are NOT included, but a protective wooden cover-top (as shown) is included.  This table would make a fine addition to any machine shop or manufacturing facility that might be limited by a tight budget.  QC and verify incoming parts from your venders.  This table has served me well for many uses such as: a inspection table, a layout table,  a precision die and mold assembly table, and a QC base for precision measuring.  The (4) ledges are a God-send as they provide for strategic clamping of fixtures, reference rails, angle plates, V-Blocks, Precision Centers, Optical Benches, etc. Lay down a sheet of 600 wet / dry sandpaper, and you can have a precision lapping block to put a fine finish on precision parts, remove burrs, or just to lap them flat using a standard figure-eight motion.  It still has only the three small chips that it had when I bought it twenty-five years ago. They never impeded any of my inspection or assembly processes at all.  Being now semi-retired, I just don’t need it as much anymore, but I’m sure you’ll happily use it quite often. After viewing other granite plates, you’ll find this unique item to be quite an asset to your processes. What would it be worth to you to have this treasure in your own shop?  Make me a reasonable offer now, so that the benefits of ownership will profit you for many years to come - just as it has done so well for me.           What can you possibly lose?  This opportunity ... if you don't act before somebody else does!  Available for your local pick-up only because quite frankly, I wouldn’t know how to arrange for its' safe shipping.  Its present location is just off Rt 95 in Yardley, PA. 19067 (NW of Trenton, NJ)

Directions

Similar products from Surface Sheets

MOJAVE GRANITE SURFACE PLATE W STAND~36 X 30 X 6~COLLINS MICROFLAT~STANDRIDGE

MOJAVE GRANITE SURFACE PLATE W STAND~36 X 30 X 6~COLLINS MICROFLAT~STANDRIDGE

  • Ontario, California, United States
  • Oct 28th
granite surface plate

granite surface plate

  • Upland, California, United States
  • Oct 28th
K133039 Optical Breadboard

K133039 Optical Breadboard

  • Stockton, California, United States
  • Oct 28th
L.S. STARRETT / WEBBER ROUND PRECISION OPTICAL FLAT 4" .000001" ACCURACY

L.S. STARRETT / WEBBER ROUND PRECISION OPTICAL FLAT 4" .000001" ACCURACY

  • Richmond Hill, Ontario, Canada
  • Oct 27th
60" x 36" x 8.75" Thick Black Granite Surface Plate – 2 Ledge - w/ Table Stand

60" x 36" x 8.75" Thick Black Granite Surface Plate – 2 Ledge - w/ Table Stand

  • San Leandro, California, United States
  • Oct 27th
Starrett 947695 Crystal Pink Granite Surface Plate 24" x 18" Grade B Toolroom

Starrett 947695 Crystal Pink Granite Surface Plate 24" x 18" Grade B Toolroom

  • Baton Rouge, Louisiana, United States
  • Oct 27th
Metroplate Granite Surface 12" x 18" x 3.25 with frame and cover Surfaceplate

Metroplate Granite Surface 12" x 18" x 3.25 with frame and cover Surfaceplate

  • Milford, Delaware, United States
  • Oct 27th
Starrett Leveling Stand and Base

Starrett Leveling Stand and Base

  • Boaz, Alabama, United States
  • Oct 27th
Machinist Surface Right Angle Plate Set Up Block V-Block Plates Jig 2" x 2" x 3"

Machinist Surface Right Angle Plate Set Up Block V-Block Plates Jig 2" x 2" x 3"

  • Clare, Michigan, United States
  • Oct 27th
L.S. STARRETT / WEBBER MODEL S2 PRECISION OPTICAL FLAT 5" .000001" ACCURACY

L.S. STARRETT / WEBBER MODEL S2 PRECISION OPTICAL FLAT 5" .000001" ACCURACY

  • Richmond Hill, Ontario, Canada
  • Oct 27th
Surface Plate; 18"x12"; Cast Steel (CTAM # 476)

Surface Plate; 18"x12"; Cast Steel (CTAM # 476)

  • Sicklerville, New Jersey, United States
  • Oct 27th
Granite Surface Plate / Table 36 X 36 X 6 with 4 clamping ledges.

Granite Surface Plate / Table 36 X 36 X 6 with 4 clamping ledges.

  • Morrisville, Pennsylvania, United States
  • Oct 26th
12192 Granite 6' x 8' x 18.5" Surface Plate

12192 Granite 6' x 8' x 18.5" Surface Plate

  • Alto, Michigan, United States
  • Oct 26th
36" x 24" x 4.5" THICK STANDRIDGE GRADE A GRANITE SURFACE INSPECTION PLATE

36" x 24" x 4.5" THICK STANDRIDGE GRADE A GRANITE SURFACE INSPECTION PLATE

  • La Puente, California, United States
  • Oct 26th
Starrett 80610 12 x 18 Granite Surface Plate AA Laboratory Grade

Starrett 80610 12 x 18 Granite Surface Plate AA Laboratory Grade

  • Alachua, Florida, United States
  • Oct 26th
RAHN Granite Parallels

RAHN Granite Parallels

  • Unionville, Connecticut, United States
  • Oct 26th
Precision Granite Surface Plate "Flat" Precise - Film Lab Quality Optical Flat

Precision Granite Surface Plate "Flat" Precise - Film Lab Quality Optical Flat

  • Santa Fe, New Mexico, United States
  • Oct 26th
AA Pink Starett Granite Machinist INSPECTION SURFACE Plate 48"x36"x8"+ Stand ESD

AA Pink Starett Granite Machinist INSPECTION SURFACE Plate 48"x36"x8"+ Stand ESD

  • Canoga Park, California, United States
  • Oct 26th
MOJAVE GRANITE SURFACE PLATE 130''x12''x12''

MOJAVE GRANITE SURFACE PLATE 130''x12''x12''

  • Pleasanton, California, United States
  • Oct 26th
K132893 Aluminum Optical Breadboard

K132893 Aluminum Optical Breadboard

  • Stockton, California, United States
  • Oct 26th

People who viewed this item also vieved

6''Inch Stainless Steel Electronic Digital Vernier Caliper Gauge Micrometer HOT

6''Inch Stainless Steel Electronic Digital Vernier Caliper Gauge Micrometer HOT

  • Hongkong, China
  • Jan 30th
VTG Mitutoyo 505-626 0-6" Dial Caliper with Case - 0.001"

VTG Mitutoyo 505-626 0-6" Dial Caliper with Case - 0.001"

  • Warren, Michigan, United States
  • Jan 30th
20" OGP Optical Gaging Products QL20 Comparator / Contour Projector

20" OGP Optical Gaging Products QL20 Comparator / Contour Projector

  • Charlotte, North Carolina, United States
  • Jan 30th
NEW RENISHAW PEL3 EXTENSION

NEW RENISHAW PEL3 EXTENSION

  • Detroit, Michigan, United States
  • Jan 30th
Gage Block Set Antique JoHannsen

Gage Block Set Antique JoHannsen

  • Abington, Pennsylvania, United States
  • Jan 30th
Angle Block Set - 10 pc. - 1 to 30 Degree - w/ Case

Angle Block Set - 10 pc. - 1 to 30 Degree - w/ Case

  • Dayton, Ohio, United States
  • Jan 30th
Dial Indicator, Teclock (.001) .25 Range, MachinistTool, Made in Japan

Dial Indicator, Teclock (.001) .25 Range, MachinistTool, Made in Japan

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Dial Indicator, Central # 201 Dial Indicator with Accessories Made in the U.S.A.

Dial Indicator, Central # 201 Dial Indicator with Accessories Made in the U.S.A.

  • Saunderstown, Rhode Island, United States
  • Jan 30th
Federal Bore Gage

Federal Bore Gage

  • Canton, Georgia, United States
  • Jan 30th
Van Keuren Gage Masters

Van Keuren Gage Masters

  • Canton, Georgia, United States
  • Jan 30th
SHARS 4" x 2" x 1" Matched Chuck Parallel NEW

SHARS 4" x 2" x 1" Matched Chuck Parallel NEW

  • Saint Charles, Illinois, United States
  • Jan 30th
Magnetic Base With Fine Adjustment Pro Quality

Magnetic Base With Fine Adjustment Pro Quality

  • Chino, California, United States
  • Jan 30th
Vintage LUFKIN RULE CO. No. 212 Depth Micrometer w/ Wood Case & 2 Rods

Vintage LUFKIN RULE CO. No. 212 Depth Micrometer w/ Wood Case & 2 Rods

  • Lansdale, Pennsylvania, United States
  • Jan 30th
STARRETT .001" MICROMETER PIN MICS 0 TO 1" NO. 3

STARRETT .001" MICROMETER PIN MICS 0 TO 1" NO. 3

  • Rochester, New York, United States
  • Jan 30th
HEIDENHAIN; READOUT; SCALE; GAGE; NEW & USED

HEIDENHAIN; READOUT; SCALE; GAGE; NEW & USED

  • Los Angeles, California, United States
  • Jan 30th
3.5" TFT-LCD Inspection Wireless Camera 9MM Borescope Endoscope Zoom Rotate 1M

3.5" TFT-LCD Inspection Wireless Camera 9MM Borescope Endoscope Zoom Rotate 1M

  • ShenZhen, China
  • Jan 30th
Protractor Tool No 17 General Hardware Mfg Co New York Stainless Steel USA

Protractor Tool No 17 General Hardware Mfg Co New York Stainless Steel USA

  • Colchester, Connecticut, United States
  • Jan 30th
Protractor No.18 General Hardware Mfg Co. New York USA Stainless Steel Tool vtg

Protractor No.18 General Hardware Mfg Co. New York USA Stainless Steel Tool vtg

  • Stoughton, Massachusetts, United States
  • Jan 30th
MACHINIST TOOLS LATHE Starrett 289 B Combination Clamp & Brown & Sharpe Ruler

MACHINIST TOOLS LATHE Starrett 289 B Combination Clamp & Brown & Sharpe Ruler

  • Morris Plains, New Jersey, United States
  • Jan 30th
Rule delpth gauge- Millers Falls

Rule delpth gauge- Millers Falls

  • Martinez, California, United States
  • Jan 30th
Vintage Lufkin Machinist Square

Vintage Lufkin Machinist Square

  • Grand Island, New York, United States
  • Jan 30th
Starrett 33JH-6-4R Junior Combination Square w/ Box

Starrett 33JH-6-4R Junior Combination Square w/ Box

  • Lansdale, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies