Graywacke GEI 24-RPA- T 24/12V Radio Power Supply/Adaptor NO CASE -NEW OLD STOCK, US $1,000.00 – Picture 0

Graywacke GEI 24-RPA- T 24/12V Radio Power Supply/Adaptor NO CASE -NEW OLD STOCK, US $1,000.00 – Picture 1

Graywacke GEI 24-RPA- T 24/12V Radio Power Supply/Adaptor NO CASE -NEW OLD STOCK, US $1,000.00 – Picture 2

Graywacke GEI 24-RPA- T 24/12V Radio Power Supply/Adaptor NO CASE -NEW OLD STOCK, US $1,000.00 – Picture 3

Graywacke GEI 24-RPA- T 24/12V Radio Power Supply/Adaptor NO CASE -NEW OLD STOCK, US $1,000.00 – Picture 4

Graywacke GEI 24-RPA- T 24/12V Radio Power Supply/Adaptor NO CASE -NEW OLD STOCK, US $1,000.00 – Picture 5

Graywacke Gei 24-rpa- T 24/12v Radio Power Supply/adaptor No Case -new Old Stock

US $1,000.00

Saylorsburg, Pennsylvania, United States
Jan 29th

Open on mobile:
QR code

NOTE: THESE DO NOT HAVE A STORAGE CASE WITH THEM, CHECK OUR OTHER AUCTIONS FOR ONES WITH CASES. THIS IS REFLECTED IN THE PRICE. THESE ARE STILL NEW OLD STOCK, JUST NO SHIPPING CASES RADIOS IN PICTURE NOT INCLUDED IN AUCTION LOCAL PICKUP AVAILABLE RETAIL PRICE IS $6,200.00 New old stock Graywacke GEI 24-RPA- T 24/12 volt radio power supply/adapter, without transport case our external power cable The GEI -24 RPA produces power for the following 12 and 24VDC radio equipment applications: · AN119 · PRC113 · PRC104 · PRC150 · PRC117 (117G Included) · PSC-5 · 12V SINCGARS without the use of communication batteries. Instead it powers the radios using 110v – 240 VAC (shore power or generator) and/or 24vDC. While GEI 24-RPA-t will provide power to Harris Radios using either power source independently, it is most effective when both AC and 24v DC are used together because that provides you with an uninterrupted power supply for your radios. GEI 24-RPA-t is designed to lie on its side, back, or stand upright. · Power any Radio using the BA5590 battery · Powers all existing 24v radios and RCU’s to include the 117G · Power Up to 4 radios at one time · Uses 110/220 AC or 24vdc power to operate · Provides clean, uninterrupted power to your radios · No modification to the radio required · Fast, easy setup and transport FEATURES: THE TOWER OF POWER Producing Power with Unmatched Reliability. When the GEI24-RPA-t is used with both 120/220v AC and 24 VDC it provides unmatched reliability. In the event of a loss of AC power, GEI24-RPA-t will continue to power the radios using the 24vDC source. To ensure the 24v battery pack is up to the task, the GEI24-RPA-tcharges the battery as long as the AC is providing power but it will not over-charge the battery. The GEI24-RPA-t Produces power for any communication device requiring the BB2590 or BA5590 style batteries by using 110 – 220 VAC (shore power or generator) and/or 24 VDC. When AC or DC alone is used to power the GEI24-RPA-t, it provides a clean, regulated DC output voltage. Connection to the radio is made with no modification needed. Simply connect the GEI24-RPA-t plug to the radio where the battery would normally connect. Powering the GEI24-RPA-t via 24 VDC is as simple as plugging in the supplied NATO slave plug into any vehicle with a mating connector. No complicated cable hookup or accessing the battery compartment is needed. GENERAL SPECIFICATIONS Efficiency 85% typical Isolation Voltage (input to output)1500VDC min Isolation Voltage (input to case& output to case) 750VDC Isolation Resistance (input tooutput) >100 M Ohms Switching Frequency (Fixed) 400 kHz±10% Minimum Load none required Weight (Tower with accessory cables )65 lbs Dimensions 23.50 L x 14.00 W x 16 D Working Temperature Range 0 - 51C Storage Temperature -20 to 80C 12/24 VDC Accessory Outputs: Pin Configuration: pin 1(-), pin 2(+) – 12 VDC Pin 4(-), pin 3(+) – 12 VDC INPUT SPECIFICATIONS Input AC Voltage Range 90 VAC – 132VAC, 216 VAC – 240 VAC Input DC Voltage Range 18-36 VDC Nominal DC Input 24 VDC Input Voltage Lockout <16>38VDC Input Filter Pi input filter Input Reflected Ripple 20mA p-p OUTPUT SPECIFICATIONS Output Current pin 1(-), pin 2(+) –4 amp Pin 4(-), pin 3(+) – 4 amp Output Voltage Tolerance ±1% max External Output Trim ±10% Line Regulation ±0.1% Load Regulation ±0.1% Short Circuit Protection Continuous Over Voltage Protection approx. 120%V out, self-resetting Ripple/Noise (20MHz BW) 1.5% V out Current Limiting Inception approx.125% Thermal Overload +110°C base plate,self-resetting 24VDC BATTERY CHARGER SPECIFICATIONS (Note:Specifications represent usage exclusively for the purpose of charging) DC Output Voltage (No Load) approx27.2 V (DC) Output Voltage Tolerance (No Load) +or - .5% Output Amperage, Max Continuous 40Amps Output Voltage (Full Load) approx>27.0 V (DC) Maximum Power Output, Continuous1100 Watts Typical Efficiency >80% Max Inrush Current, Single Cycle 50Amps Short Circuit Protection Yes Overload Protection >100% Load Regulation <1% Fan Control PROPORTIONAL Thermal Protection YES

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“New Old Stock, scratches and wear, complete less RED/BLACK external power cord and shipping case”