Green Galaxy Black And White Screen Printing Ink - Water Based Ink Gallons

US $99.99

Vancouver, Washington, United States
Jan 30th

Open on mobile:
QR code

The working man’s combo was specially designed to give you easy access to the two most commonly used inks in the screen printing industry. Green Galaxy’s Comet White and Pitch Black packaged together, giving you the highest standard of water-based inks with only one purchase. Green Galaxy’s Comet White is a Phtalate and PVC free water based ink that performs like plastisol, but feels like water based ink. Light, creamy and easy to use Comet White stays wet in the screen during printing longer than any other water based white we have tested. With the ability to print through mesh sizes ranging from 110-305, Comet White not only prints great it feels amazing on the shirt. With an extremely soft hand, bright and crisp look and flexible nature, Comet White is the best thing to hit the screen printing since White Plastisol. Green Galaxy’s Pitch Black is an eco-friendly water-based ink, specially formulated to stay wet while printing, cover fabric, and wash extremely well. Great for wet-on-wet printing on both fabric and paper, Pitch Black not only holds detail but feels soft on your shirt, all while maintaining the boldness of black you desire for professional quality prints. Kit Includes: 1 gallon Green Galaxy Comet White 1 gallon Green Galaxy Pitch Black General Information: Eco-friendly, ready-to-use water-based ink for printing on light or dark cotton and other non dye-migrating fabrics. Can be printed on dark polyester or dye migrating fabrics with the use of a compatible low cure catalyst. Mesh Guidelines: Can be used with any mesh between 110-305. Stencil/Emulsion Guidelines: We recommend using either a water resistant emulsion like Ryonet WBP or using an emulsion hardener like Ryonet Harden-X. Mixing info: This product can be mixed with transparent and covering ink from the AB series Printing Instructions: Load screen with plenty of Green Galaxy water-based ink. Flood screen prior to printing. The ink can be printed with a push or pull squeegee stroke. After printing, flood screen allowing ink to sit on top of image to avoid drying. If screen clogs or exhibits dry ink in the print, re-flood and aggressively print again, this should clear the screen. If it does not clear the screen, spray a small amount of warm water into the stuck areas of the screen and wipe out with a rag. If you are leaving your screen for an extended period of time be sure to leave your screen flooded completely. If your ink begins to scale over, spray with water to re-wet the ink. Green Galaxy water-based ink can be printed with other water-based inks and with plastisol inks. Flashing Instructions: For flashing, forced air flash is optimal. Flash until dry to the touch. Curing Instructions: Printed fabric should be cured for a minimum of 90 seconds at 360°F. Ideally, printed fabric should be cured for three minutes at 300–320°F. Testing/Precautions: After printing, perform a stretch test to ensure elasticity. It is always recommend to perform a wash test to ensure proper cure prior to going into production. You may also run abrasion testing to watch for flaking and test adhesion. Increase cure dwell time if testing fails Clean Up: Ink should be removed from screen as soon as printing is completed. General wash-up (on ink that has not dried) can be done with water, though using Enviro-Solve is much easier and recommended. For more aggressive cleaning or dried screens, use Enviro-Solve to dissolve ink and blast out areas of stuck ink with water pressure. Storage info: Keep container(s) tightly closed. Store in cool, well ventilated location that is locked. General Safety Precautions: Do not breathe vapors. Wear protective gloves. Do not eat, drink or smoke when using product. Wash hands thoroughly after handling. Dispose of this product in accordance with local, regional, national and international regulations as specified.

Condition:	New: A brand-new, unused, unopened, undamaged item (including handmade items). See the seller's listing for full details. ...	Brand	Green Galaxy
MPN	IKKT-GGWBBLKWHT-G
Country/Region of Manufacture	United States
Ink Type	Water Based