Greenlee 7238SB Slug-Buster 1/2" to 2" Knockout Kit with Ratchet Wrench, US $149.99 – Picture 0

Greenlee 7238SB Slug-Buster 1/2" to 2" Knockout Kit with Ratchet Wrench, US $149.99 – Picture 1

Greenlee 7238sb Slug-buster 1/2" To 2" Knockout Kit With Ratchet Wrench

US $149.99

Monroe, Michigan, United States
Jan 31st

Open on mobile:
QR code

Slug-Buster Knockout Kit with Ratchet Wrench The Greenlee Slug-Buster knockout kit is favored by most electrical experts. This hole-making kit was made for the serious contractor or electrician, as well as the do-it-yourself handyman, coming complete with the most common size of hole-making tools--including punches, dies, and draw studs--to meet the busy electrician's needs on the construction site. The Slug-Buster knockout kit also includes a 1-inch hex ratchet for added convenience. Versatile Performance The kit's punch has a unique profile to make the electrician's hole making easier. It splits the slug in half making it extremely easy to remove. It will perform punch holes for most conduit sizes including 1/4-inch, 1/2-inch, and 3/4-inch sizes, as well as 1-inch, 1-1/4-inch, 1-1/2-inch, and 2-inch size holes. Exceptionally resourceful, the tools in the Greenlee Slug-Buster knockout kit will make holes in mild steel and in aluminum up to 10 gauge; they will also punch holes in fiberglass and plastic and can make holes for conduit with an outside diameter of 7/8 inches. Thoughtfully designed, the Slug-Buster can be used with a battery or hydraulic ratchet, as well as a manual ratchet. Slug-Buster Knockout Punches 0.492 Inch to 2.520 Inches Unique punch profile splits slugs for easier slug removal Use with battery-powered, hydraulic, ratchet, or manual drivers Uses standard Greenlee dies and draw studs Slug Buster punches available in sizes up through 2.52 inches (64 mm) Slug-Buster Knockout Punch Kit Includes: Catalog Number Description Size of Actual Hole 34941 Ratchet wrench with 1-inch hex 721-1/2 1/2-inch conduit size punch 7/8 inch 0.885 inch 22.5 mm 16 pg 14722 1/2-inch conduit size die 7/8 inch 0.885 inch 22.5 mm 16 pg 721-3/4 3/4-inch conduit size punch - 1.115 inches 28.3 mm - 124AV 3/4-inch conduit size die - 1.15 inches 28.3 mm - 721-1 1-inch conduit size punch - 1.362 inches 34.6 mm - 126AV 1-inch conduit size die - 1.362 inches 34.6 mm - 721-1-1/4 1-1/4-inch conduit size punch - 1.701 inches 43.2 mm - 128AV 1-1/4-inch conduit size die - 1.701 inches 43.2 mm - 721-1-1/2 1-1/2-inch conduit size punch - 1.951 inches 49.6 mm - 440AV 1-1/2-inch conduit size die - 1.951 inches 49.6 mm - 721-2 2-inch conduit size punch 2-3/8 inches 2.416 inches 61.5 mm - 442AV 2-inch conduit size die 2-3/8 inches 2.416 inches 61.5 mm - 00042 Ball bearing draw stud with 1-inch hex head--3/8 inch by 1-5/8 inches 304AVBB Ball bearing draw stud--3/4 inch by 2-15/16 inches 34758 Plastic case

Condition	New other (see details) : A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“The tools are brand new. Never been used. The case has a few scuffs on it and is dirty from sitting in storage.”