Gribetz 90” High Speed Heavy Duty Multi-needle Double Lock Quilting Machine

US $7065

Cheraw, South Carolina, United States
Oct 22nd

Open on mobile:
QR code

Gribetz 90” Ultra 12 High Speed Heavy Duty Multi Needle Double Lock Quilting Machine ***Please note - pictures are representative, and may not be of the machine you choose! I have two left, plus one slightly smaller one suitable for light use or parts*** Model 1300 DESCRIPTION: 1. The Gribetz Model 1300 High Speed Double Lock Chain Cam Driven Quilting Machine was design was based on using the Union Special double lock chain stitch sewing machine’s looper stitch principles and substituting a looper drive for a lock stitch shuttle bottom feed. 2. Designed for high speed heavy duty double lock chain quilting for transportation, automotive, household, utility and recreational usage. 3. Used specifically to produce quilted material with 18 to 30 oz. cotton fiber filler. With timing changes, fillers of polyester, shoddy or foam can be substituted and quality quilted. 4. Uses top & bottom woven fabric layers of 1 to 8 oz. cotton and/or poly-cotton fibers. 5. 1 x 3 x 6 design with all needles placed on front bars. 6. Timing options of 5 to 8 stitches per inch depending on filler and fabric. 7. 220 volt 3 phase gear driven motor with a cam driven zig-zag design pattern. 8. Production speed: with approx. 1000 rpm, production of 500 to 1000 yd. per 8 hr. shift depending on filler and fabric quilted. SPECIFICATIONS: Mfg. : Gribetz Model #1300 Double Needle Bar Width - 90” 3 Needle Bars (1 x 3 x 6 design) Quantity of Loopers: 82 Overhead Thread Rack with Capacity of +84 Thread Cones Approximate measurements: Height: 8' Width: 44" for the main machine without accessories, 13' with the threader Length: 16' RECOMMENDED QUILTING SUPPLIES *Top Needle Thread: High Tenacity 300 Denier Textured Polyester with lefthand twist. 18 to 24 oz.cones *Bottom Looper Thread: Low Tenacity 300 Denier Textured Polyester with lefthand twist. 18 to 24 oz.cones SPECIAL INFORMATION: 1. This quilting machine was running in good condition when the plant closed. This machine is being sold off our plant production floor. The machine is fully operational. All repairs and maintenance performed by company maintenance. This machine has not been moved or stored in a warehouse. 2. This machine is considered used equipment and is sold as an “AS IS PURCHASE”. 3. Buyer is responsible for removal insurance to protect Buyer and Seller during the loading process. 4. Buyer takes responsibility of the purchased machine in the plant production area. Seller will then disconnect electrical power prior to removal. 5. Buyer is responsible for machine’s removal, loading and transportation. Seller can refer you to a local shop that can provide a heavy duty fork lift for moving the machine to your truck. Estimated cost of the fork lift, based on last use, was $950. 6. This sale is final with no warranties given, implied or otherwise. 7. For additional information or for arranging an inspection message me with your contact information. 8. Machine is located in Wallace, SC 29596. MULTI-NEEDLE QUILTING MACINE HISTORY USA lockstitch multi-needle quilters were first developed by Paradise Machine Co. in Patterson NJ. EMCO and Pathe Machine Company principals were trained by Paradise. EMCO “Edgewater Machine Co.” designed a lighter frame machine used for the bedding industry. Pathe’s design was closer to Paradise’s heavy duty frame and sold into the bedding, automotive and industrial industries. The Gribetz High Speed Double Lock Chain Quilting Machine was designed based on using the Union Special double lock chain stitch sewing machine principles of substituting a looper drive for a shuttle bottom feed. This procedure was accepted by the bedding and industrial industries for its high production capabilities. Please pay within 4 days of purchase, or message me upon purchase to let me know when you expect to pay. Thank you! NO RETURNS! SALE OF THIS ITEM IS FINAL!!!! PLEASE CONTACT ME IF YOU WISH TO INSPECT IT PRIOR TO PURCHASE! NO SHIPPING!!!! YOU MUST ARRANGE PICK UP AT THE PLANT LOCATION. YOU ARE RESPONSIBLE FOR ALL PACKING, AND REMOVING THE MACHINE FROM THE PLANT FLOOR. Plant has a loading dock that you may use to load the machine. Proof of insurance required before you may go on the plant floor (for your protection and mine!). Most business insurance already covers for this. Check out my other items! Be sure to add me to your favorites list! Stores