+ Post new Ad
Grizzly 3400-3501 Clamping Kit for 1/2-Inch T-slots, 58-Piece New, US $98 – Picture 0
Grizzly 3400-3501 Clamping Kit for 1/2-Inch T-slots, 58-Piece New, US $98 – Picture 0

Grizzly 3400-3501 Clamping Kit For 1/2-inch T-slots, 58-piece New

US $98

  • Los Angeles, California, United States
  • May 27th
Open on mobile:
QR code
Up for auction is a Grizzly Industrial G1075 Clamping Kit for 1/2" T-slots.  It is brand new.  Just the box is a little beat up from storage.  I ordered the wrong size, so that's why I am selling it.  It was never used.  here are some specs. All the blocks, bolts, nuts and hold-downs are case hardened. Each clamping kit includes: (24) studs (four studs each: 3", 4", 5", 6", 7", and 8" long), (6) step block pairs, (6) T-nuts, (6) flange nuts, (4) coupling nuts, and (6) end hold-downs. The Model G1075 set fits 1/2" T-slots and includes 3/8"-16 studs. Racks can be bolted to the wall or side of machine for easy access.

Directions

Similar products from Clips & Jaws

DE-STA-CO 424 Manual Squeeze Action Clamp

DE-STA-CO 424 Manual Squeeze Action Clamp

  • Lone Pine, California, United States
  • May 28th
DE-STA-CO 441 Manual Squeeze Action Clamp

DE-STA-CO 441 Manual Squeeze Action Clamp

  • Lone Pine, California, United States
  • May 28th
HEAVY DUTY 4" Adjustable C-Clamp; JORGENSEN #174

HEAVY DUTY 4" Adjustable C-Clamp; JORGENSEN #174

  • Saint Charles, Illinois, United States
  • May 28th
De Sta Co Model 830 Straight Line Air Cylinder

De Sta Co Model 830 Straight Line Air Cylinder

  • Jacksonville, North Carolina, United States
  • May 27th
Lot 6" D Clamp Duralast Adjustable Locking pliers CR-V

Lot 6" D Clamp Duralast Adjustable Locking pliers CR-V

  • Henderson, North Carolina, United States
  • May 27th
5/8 inch dia. MILL HOLD DOWNS TOE CLAMPS

5/8 inch dia. MILL HOLD DOWNS TOE CLAMPS

  • Simi Valley, California, United States
  • May 27th
Carr lane CL- 650- ATC clamps Qty. 2

Carr lane CL- 650- ATC clamps Qty. 2

  • Holly Springs, North Carolina, United States
  • May 27th
USED KANT TWIST 3" MACHINIST UNIVERSAL T-HANDLE HOLDING CLAMP VERY GOOD COND

USED KANT TWIST 3" MACHINIST UNIVERSAL T-HANDLE HOLDING CLAMP VERY GOOD COND

  • Melbourne, Florida, United States
  • May 27th
Vintage No. 304 MACHINIST PARALLEL CLAMP *

Vintage No. 304 MACHINIST PARALLEL CLAMP *

  • Airway Heights, Washington, United States
  • May 27th
2 LOT USED KANT TWIST 2" MACHINIST UNIVERSAL T-HANDLE HOLDING CLAMP VGC

2 LOT USED KANT TWIST 2" MACHINIST UNIVERSAL T-HANDLE HOLDING CLAMP VGC

  • Melbourne, Florida, United States
  • May 27th
2 NEW 1000LB CARR LANE 650-HTC HORIZONTAL WORK HOLDER MACHINE TOGGLE HAND CLAMPS

2 NEW 1000LB CARR LANE 650-HTC HORIZONTAL WORK HOLDER MACHINE TOGGLE HAND CLAMPS

  • Long Beach, California, United States
  • May 27th
Carr Lane CL-650-VTC Toggle Clamp

Carr Lane CL-650-VTC Toggle Clamp

  • Croydon, Pennsylvania, United States
  • May 27th
Carr Lane CL-450-VTC Toggle Clamp

Carr Lane CL-450-VTC Toggle Clamp

  • Croydon, Pennsylvania, United States
  • May 27th
Armstrong 78 - 412 C clamp in great shape

Armstrong 78 - 412 C clamp in great shape

  • Newburgh, New York, United States
  • May 27th
Bessey clamp 410...10 inch x 5 1/2 inch Used once

Bessey clamp 410...10 inch x 5 1/2 inch Used once

  • Newburgh, New York, United States
  • May 27th
PAIR OF SELF CENTERING ROCKER LATHE MILL TOOL CLAMPS

PAIR OF SELF CENTERING ROCKER LATHE MILL TOOL CLAMPS

  • Chino, California, United States
  • May 27th
Set-3 Pneumatic horizontal clamp & Pneumatic vertical clamp for Omga Mitre Saws

Set-3 Pneumatic horizontal clamp & Pneumatic vertical clamp for Omga Mitre Saws

  • Alpharetta, Georgia, United States
  • May 27th
Teco T-bolt #45207 3/8-16 x 2 1/2 , 3/8 " table t-slot size,(34-pcs for 100.00)

Teco T-bolt #45207 3/8-16 x 2 1/2 , 3/8 " table t-slot size,(34-pcs for 100.00)

  • National City, California, United States
  • May 27th
Teco T-bolt #45211 3/8 x4 , 3/8 " table t-slot size,(24-pcs for 75.00)

Teco T-bolt #45211 3/8 x4 , 3/8 " table t-slot size,(24-pcs for 75.00)

  • National City, California, United States
  • May 27th
Teco T-bolt #45406 1/2 x 21/2 , 1/2 " table t-slot size,(28 -pcs for 75.00)

Teco T-bolt #45406 1/2 x 21/2 , 1/2 " table t-slot size,(28 -pcs for 75.00)

  • National City, California, United States
  • May 27th

People who viewed this item also vieved

Dead Center (Inv.26081)

Dead Center (Inv.26081)

  • Portland, Connecticut, United States
  • Jan 30th
Ready Tool Live Center #4 Morse Taper #26073

Ready Tool Live Center #4 Morse Taper #26073

  • Portland, Connecticut, United States
  • Jan 30th
RITEN Concentric 00434 Cat IV Style 4 Interchangeable Bell Head Adaptor USA J1

RITEN Concentric 00434 Cat IV Style 4 Interchangeable Bell Head Adaptor USA J1

  • Saint Louis, Missouri, United States
  • Jan 30th
Buck Chuck 4" Model 1434 3-jaw with original back plate.

Buck Chuck 4" Model 1434 3-jaw with original back plate.

  • Kirklin, Indiana, United States
  • Jan 30th
New Strong 6" SC6 3 Three Jaw Plain Back Lathe Meehanite Chuck

New Strong 6" SC6 3 Three Jaw Plain Back Lathe Meehanite Chuck

  • La Grange, Illinois, United States
  • Jan 30th
6" BUCK 4 JAW CHUCK

6" BUCK 4 JAW CHUCK

  • Pinellas Park, Florida, United States
  • Jan 30th
COLLET AF ACURA FLEX AF208 59/64 23.5MM TSD MILLING CNC BRIDGEPORT INSERT HOLDER

COLLET AF ACURA FLEX AF208 59/64 23.5MM TSD MILLING CNC BRIDGEPORT INSERT HOLDER

  • Plymouth, Michigan, United States
  • Jan 30th
COLLET AF ACURA FLEX AF198 49/64 19.5MM TSD MILLING CNC BRIDGEPORT INSERT HOLDER

COLLET AF ACURA FLEX AF198 49/64 19.5MM TSD MILLING CNC BRIDGEPORT INSERT HOLDER

  • Plymouth, Michigan, United States
  • Jan 30th
COLLET AF ACURA FLEX AF125 35/64 TSD MILLING CNC BRIDGEPORT INSERT HOLDER

COLLET AF ACURA FLEX AF125 35/64 TSD MILLING CNC BRIDGEPORT INSERT HOLDER

  • Plymouth, Michigan, United States
  • Jan 30th
FIXTURE TO SHARPEN DRILL BITS

FIXTURE TO SHARPEN DRILL BITS

  • New Castle, Pennsylvania, United States
  • Jan 30th
NICE!! USED PRECISION ANGLE PLATE

NICE!! USED PRECISION ANGLE PLATE

  • San Bernardino, California, United States
  • Jan 30th
Atlantic Machine Tool Works Spin Table (Inv.16755)

Atlantic Machine Tool Works Spin Table (Inv.16755)

  • Portland, Connecticut, United States
  • Jan 30th
HURON 11 PEH SEGMENTED JAWS SET OF 3 USED(12 TEETH/1")

HURON 11 PEH SEGMENTED JAWS SET OF 3 USED(12 TEETH/1")

  • Coeur d'Alene, Idaho, United States
  • Jan 30th
Universal Indexing Dividing Head w/Tailstock, Inv 19863

Universal Indexing Dividing Head w/Tailstock, Inv 19863

  • Portland, Connecticut, United States
  • Jan 30th
Carr Lane CL10-LHRP Locking Retractable Plunger 1pc New

Carr Lane CL10-LHRP Locking Retractable Plunger 1pc New

  • Redford, Michigan, United States
  • Jan 30th
GIbraltar 42052688 toolmakers screwless vise 2-1/2" opening, jaw height 1"

GIbraltar 42052688 toolmakers screwless vise 2-1/2" opening, jaw height 1"

  • Saint Louis, Missouri, United States
  • Jan 30th
DAYTON VISE 6 INCH MILLING MACHINE VISE QUICK RELEASE

DAYTON VISE 6 INCH MILLING MACHINE VISE QUICK RELEASE

  • Rosemount, Minnesota, United States
  • Jan 30th
10''x2''x1.5'' Reversible Steel Vise Jaws

10''x2''x1.5'' Reversible Steel Vise Jaws

  • Eastlake, Ohio, United States
  • Jan 30th
Nikken 500mm 19.7" Rotary Table .001° Fanuc Motor 12Nm 7.6A 10S Slotted 4th Axis

Nikken 500mm 19.7" Rotary Table .001° Fanuc Motor 12Nm 7.6A 10S Slotted 4th Axis

  • Windsor, Connecticut, United States
  • Feb 17th
Troyke U-12 12" Horizontal / Vertical Rotary Table Machinists Milling Indexed

Troyke U-12 12" Horizontal / Vertical Rotary Table Machinists Milling Indexed

  • Palatine, Illinois, United States
  • Feb 17th
New in crate Haas HRT210 Rotary Table, 8.3" Diameter 4th Vf Vmc Milling Cnc Mill

New in crate Haas HRT210 Rotary Table, 8.3" Diameter 4th Vf Vmc Milling Cnc Mill

  • Rolla, Missouri, United States
  • Feb 17th
UNIVERSAL ENG KWIK-SWTICH Y DOUBLE ANGLE TAPER COLLET CHUCKS #9 B&S

UNIVERSAL ENG KWIK-SWTICH Y DOUBLE ANGLE TAPER COLLET CHUCKS #9 B&S

  • Berkeley, California, United States
  • Feb 23rd
KENNAMETAL TG75 COLLET CHUCK w/ CAT40 SHANK & 3 COLLETS

KENNAMETAL TG75 COLLET CHUCK w/ CAT40 SHANK & 3 COLLETS

  • Covina, California, United States
  • Feb 23rd
ERICKSON, BT40BER32070M, Collet Chuck, 0.08- 0.81" Cap, Projection 2.760", /HV1/

ERICKSON, BT40BER32070M, Collet Chuck, 0.08- 0.81" Cap, Projection 2.760", /HV1/

  • Saint Louis, Missouri, United States
  • Feb 23rd
MAGNETIC V BLOCK - VEE BLOCK 4" x 3" PR (MVB/4P)

MAGNETIC V BLOCK - VEE BLOCK 4" x 3" PR (MVB/4P)

  • Jacksonville, Texas, United States
  • Feb 24th
Machinist's ground Steel Parallel Set 10 Pair 1/8 X 6 Storage Case 1/2 to 1-5/8

Machinist's ground Steel Parallel Set 10 Pair 1/8 X 6 Storage Case 1/2 to 1-5/8

  • Clermont, Georgia, United States
  • Feb 24th
4 Aluminum step blocks

4 Aluminum step blocks

  • East Peoria, Illinois, United States
  • Feb 24th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies