+ Post new Ad
Grizzly Brand Radial Drill Press, US $550.00 – Picture 0
Grizzly Brand Radial Drill Press, US $550.00 – Picture 1
Grizzly Brand Radial Drill Press, US $550.00 – Picture 2
Grizzly Brand Radial Drill Press, US $550.00 – Picture 3
Grizzly Brand Radial Drill Press, US $550.00 – Picture 4
Grizzly Brand Radial Drill Press, US $550.00 – Picture 5
Grizzly Brand Radial Drill Press, US $550.00 – Picture 0
Grizzly Brand Radial Drill Press, US $550.00 – Picture 1
Grizzly Brand Radial Drill Press, US $550.00 – Picture 2
Grizzly Brand Radial Drill Press, US $550.00 – Picture 3
Grizzly Brand Radial Drill Press, US $550.00 – Picture 4
Grizzly Brand Radial Drill Press, US $550.00 – Picture 5

Grizzly Brand Radial Drill Press

US $550.00

  • East Haven, Connecticut, United States
  • Feb 22nd
Open on mobile:
QR code
Item #G9969 retail is $695, check for yourself. Press has been gently used less than 10X in the past 3 months, when I bought it new. Purchaser is to disassemble and transport themselves. It weighs 410 lbs. 
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “Perfect condition, barely used. Been replaced.”

Directions

Similar products from Drill Presses & Spare Parts

POWERMATIC DRILL PRESS #1150 PARTS "HEAD/TABLE ELEVATOR"

POWERMATIC DRILL PRESS #1150 PARTS "HEAD/TABLE ELEVATOR"

  • El Paso, Texas, United States
  • Feb 24th
POWERMATIC DRILL PRESS #1150 PARTS "SPINDLE"

POWERMATIC DRILL PRESS #1150 PARTS "SPINDLE"

  • El Paso, Texas, United States
  • Feb 24th
peddle drill press

peddle drill press

  • Rahway, New Jersey, United States
  • Feb 24th
DURACRAFT BENCH DRILL PRESS MODEL DP514

DURACRAFT BENCH DRILL PRESS MODEL DP514

  • Havertown, Pennsylvania, United States
  • Feb 23rd
Gardian Drill Press 4ft Type Km Volt 110,amp 9.4 Output. 1/2 Hp Rpm 1720.

Gardian Drill Press 4ft Type Km Volt 110,amp 9.4 Output. 1/2 Hp Rpm 1720.

  • Bronx, New York, United States
  • Feb 23rd
Vintage Kingston-Conley 1/2 HP Electric Motor 1740 RPM Type KB Runs Good

Vintage Kingston-Conley 1/2 HP Electric Motor 1740 RPM Type KB Runs Good

  • Cape Canaveral, Florida, United States
  • Feb 23rd
3FT ARM 11" COLUNM CARLTON RADIAL ARM DRILL PRESS

3FT ARM 11" COLUNM CARLTON RADIAL ARM DRILL PRESS

  • Grand Blanc, Michigan, United States
  • Feb 22nd
Rockwell/Delta 17-600 Drill Press, 1 HP 3 PH 230/460V

Rockwell/Delta 17-600 Drill Press, 1 HP 3 PH 230/460V

  • Sheboygan, Wisconsin, United States
  • Feb 22nd
Delta 17-900 Drill Press, 3/4 HP, Single Phase -- Two Available

Delta 17-900 Drill Press, 3/4 HP, Single Phase -- Two Available

  • Sheboygan, Wisconsin, United States
  • Feb 22nd
10 inch Drill Press Tilt Laser Motor 5 Speed Cast Iron Base Garage Punch Chuck

10 inch Drill Press Tilt Laser Motor 5 Speed Cast Iron Base Garage Punch Chuck

  • United States
  • Feb 22nd
Rockwell Delta 17-600 17" Drill Press Machinist Tool 36" x 23" Table

Rockwell Delta 17-600 17" Drill Press Machinist Tool 36" x 23" Table

  • Baton Rouge, Louisiana, United States
  • Feb 22nd
DELTA ROCKWELL 17 DRILL PRESS TABLE MOUNT & RAISING MECHANISM MILWAUKEE COMPLETE

DELTA ROCKWELL 17 DRILL PRESS TABLE MOUNT & RAISING MECHANISM MILWAUKEE COMPLETE

  • Philadelphia, Pennsylvania, United States
  • Feb 22nd
VINTAGE DUNLAP 1/4 HORSEPOWER SPLIT PHASE MOTER BRONZE BEARINGS

VINTAGE DUNLAP 1/4 HORSEPOWER SPLIT PHASE MOTER BRONZE BEARINGS

  • Slate Hill, New York, United States
  • Feb 17th
delta drill press

delta drill press

  • Rowe, Massachusetts, United States
  • Feb 17th
INDUSTRIAL DRILL PRESS, 14", 16 SPEED, NORTHERN TOOL, RDM-100F

INDUSTRIAL DRILL PRESS, 14", 16 SPEED, NORTHERN TOOL, RDM-100F

  • Fort Lauderdale, Florida, United States
  • Feb 17th
Chas G Allen Co drill press large industrial machine 1.5 hp

Chas G Allen Co drill press large industrial machine 1.5 hp

  • Pottstown, Pennsylvania, United States
  • Feb 16th
Powermatic 1200 Drill Press RPM gauge Speed Adjusting Dial Plate Variable Round

Powermatic 1200 Drill Press RPM gauge Speed Adjusting Dial Plate Variable Round

  • Greeley, Colorado, United States
  • Feb 15th
Buffalo Forge #21 Drill Press working w VFD Industrial Antique Vintage Steampunk

Buffalo Forge #21 Drill Press working w VFD Industrial Antique Vintage Steampunk

  • Portland, Oregon, United States
  • Feb 14th
POWERMATIC 1150 VARIABLE SPEED DRILL PRESS

POWERMATIC 1150 VARIABLE SPEED DRILL PRESS

  • Charlotte, North Carolina, United States
  • Feb 14th
Drill press

Drill press

  • Johns Island, South Carolina, United States
  • Feb 14th

People who viewed this item also vieved

Preac Precision Miniature Woodworking Table Saw 3000 RPM JE1H021N

Preac Precision Miniature Woodworking Table Saw 3000 RPM JE1H021N

  • El Dorado Hills, California, United States
  • Mar 7th
JET 12-in Single Phase Table Saw JTS-12

JET 12-in Single Phase Table Saw JTS-12

  • West Babylon, New York, United States
  • Mar 7th
Vintage Boice-Crane Miter Gauge Table Band Saw Sander Shaper Drill Press CLEAN!

Vintage Boice-Crane Miter Gauge Table Band Saw Sander Shaper Drill Press CLEAN!

  • Westland, Michigan, United States
  • Mar 7th
Dynabrade 18100 Dynafile II Portable Belt Sander With Extra belts NEW Lists $500

Dynabrade 18100 Dynafile II Portable Belt Sander With Extra belts NEW Lists $500

  • Martinsville, Indiana, United States
  • May 24th
Dynabrade 59020 5" Spirit Non Vacuum Random Orbital Sander 3/16 Dynorbital

Dynabrade 59020 5" Spirit Non Vacuum Random Orbital Sander 3/16 Dynorbital

  • Albuquerque, New Mexico, United States
  • May 24th
DYNABRADE DYNAFILE 01190 20000 RPM Pneumatic Air Sander File

DYNABRADE DYNAFILE 01190 20000 RPM Pneumatic Air Sander File

  • Superfast Shipping From QC , Canada
  • May 24th
8 PCS 3d Models STL for CNC Router Engraver Machine Relief Artcam Clock aspire

8 PCS 3d Models STL for CNC Router Engraver Machine Relief Artcam Clock aspire

  • Великий Устюг, Вологодская область, Russian Federation
  • May 29th
5 PCS 3d Models STL for CNC Router Engraver Machine Relief Artcam #3D PANELS

5 PCS 3d Models STL for CNC Router Engraver Machine Relief Artcam #3D PANELS

  • Великий Устюг, Вологодская область, Russian Federation
  • May 29th
Set of 9 files, wood carving, furniture theme 3D STL file 3D Model

Set of 9 files, wood carving, furniture theme 3D STL file 3D Model

  • Moscow, Russian Federation
  • May 29th
Delta Unisaw/Shaper Cover / Door

Delta Unisaw/Shaper Cover / Door

  • Columbia Falls, Maine, United States
  • Jun 3rd
2 Delta Rockwell Contractor Table Saw Extension Wings Steel. 10" x 27"

2 Delta Rockwell Contractor Table Saw Extension Wings Steel. 10" x 27"

  • Columbia Falls, Maine, United States
  • Jun 3rd
Delta Rockwell Unisaw, Miter Gauge For 3/8" x 3/4" Slot

Delta Rockwell Unisaw, Miter Gauge For 3/8" x 3/4" Slot

  • Columbia Falls, Maine, United States
  • Jun 3rd
NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck

NOVA 48111 1-Inch 8TPI Direct Thread Precision Midi Wood Turning Chuck

  • Oneonta, Alabama, United States
  • Jun 9th
NOS Craftsman Lathe 6 Inch Face Plate NIB

NOS Craftsman Lathe 6 Inch Face Plate NIB

  • Wilsey, Kansas, United States
  • Jun 9th
Central Machinery Mini Lathe

Central Machinery Mini Lathe

  • Wheeling, Illinois, United States
  • Jun 9th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies