Guard Shack - Exterior Security Booth 6'x6', US $4,500.00 – Picture 0

Guard Shack - Exterior Security Booth 6'x6', US $4,500.00 – Picture 1

Guard Shack - Exterior Security Booth 6'x6', US $4,500.00 – Picture 2

Guard Shack - Exterior Security Booth 6'x6', US $4,500.00 – Picture 3

Guard Shack - Exterior Security Booth 6'x6'

US $4,500.00

Swampscott, Massachusetts, United States
Jan 30th

Open on mobile:
QR code

***PLEASE NOTE THAT THIS ITEMS IS ALSO BEING LISTED ON CRAIG'S LIST*** This Shack's History: This structure was custom built/ordered for a Boston hotel renovation project in late 2013. It was used as a security check-point for all subcontractors. It has since been used as a garden shed at a residential house. It is not large enough for what I hoped to store/grow this past season. As such, I am selling it to make room for another larger shed. It was purchased brand new from the manufacturer for $6,250. Pick-up: You will need a tow truck. The structure weighs approximately 3,000 pounds. I can help coordinate with the tow service that delivered it to my house. ---------------------- PANEL-BUILT Panel Built exterior buildings begin with a panel constructed around a polystyrene core that is resistant to water, vermin, and termites. The core structure is then permanently bonded to one of many different facing materials selected from the widest variety available in the industry. SPECIFICATIONS: WALLS- RATED FOR 90 MPH WIND LOADS STEEL BOTH SIDES OF WALL (S/S): 24 LF @ 8 FEET TALL The walls shall be 3" thick composite sandwich panels. The outside and inside facings shall be 26 gage galvanized stucco embossed steel pre-painted white (other colors available upon request). The core shall be 2” of one pound density polystyrene laminated using a structural adhesive. Every 4’ will have an aluminum extruded binder post with snap cover to house all the electrical components. All binder posts, window trim and doors are painted to match the wall covering. FLAT ROOF W/ 9” OVERHANG 3-PLY: 84 SQUARE FEET The roof shall be 3" thick composite sandwich panels. Both sides shall be stucco-embossed aluminum pre-painted white. The core shall be of 1 lb. density polystyrene foam. The entire panel shall be laminated together using a solvent free two-part polyurethane adhesive and pressure. The panels shall have formed edge connectors that are capable of being friction locked without mechanical fasteners using a full-length joint without through metal connectors. The joint shall allow lateral expansion and contraction. WALL & ROOF CORE The polystyrene core shall have the following mechanical properties; Shear strength (flatwise) 18 -22 PSI Shear Modulus (flatwise) 280 - 320 PSI The water absorption rate shall be less then 4% INSULATION All wall and roof panels shall be insulated to a minimum R value of 11. DOORS 20 GAUGE INSULATED STEEL WITH 1/8” TEMPERED GLASS W / CLOSER: 1 EACH The door(s) shall be 36"w X 84"h X 1 3/4" thick and shall be constructed of 20 gauges hot dipped galvanized steel, mill treated for proper paint adherence. The door shall have top and bottom channel of 16 gauge steel projection welded to door skins on no less than 2" centers. The top channel is to be flush while the bottom channel is to be inverted. The hinge reparations are to be 9-gauge steel reinforcement’s projection welded to the door skins in six places each. Hinge preparation is to be cut through the doors and provided with reversible filler plates to allow building site handling. Standard hinge preparation is to be 4-1/2" regular weight .134" hinge, conforming to ANSI A1567, three preparations. The doorframe shall be 16-gauge single "rabbit" commercial quality steel. The frame shall be pre-mortised for application of matching hinges and striker set of the door. The door shall be supplied with all necessary hardware as to meet local and state code requirements. The door shall be fabricated as to include 1/8" tempered safety glass in the upper half. The window shall measure approximately 22"w X 36"h. Each door includes a sweep, threshold, satin chrome lever set and weather-stripping. All lever sets are keyed alike. WINDOWS PICTURE WINDOW: 3 EACH Picture windows shall be nominal 3’ 8” wide X 3' high. They shall be installed 42" off the floor, glazed with 1/4” tempered safety glass, and shall be an integral part of the wall panel. The window shall be non-opening, and the entire window frame shall be painted in accordance with AAMA Specification 603.8. ELECTRICAL ELECTRICAL PACKAGE: 1 EACH The electrical package shall consist of 1/2" EMT conduit concealed in the panel and attached to flush mounted 2x4 boxes at receptacle and switch locations. There shall be (1) wall switch, (2) duplex receptacles, (1) telephone/computer prep, (1) 2x4 surface mount 110v fluorescent fixture (100 foot candles at desk height). This package shall meet NEC (current edition). ELECTRICAL SERVICE 125 AMP, 8 SPACE-SINGLE PHASE: 1 EACH The electrical service shall include an indoor load center of sufficient amperage and circuit capacity as to handle all lighting loads, receptacles and HVAC systems. NOTE: The entire electrical system for the modular building shall be in accordance with the National Electrical Code and shall meet all N.E.C requirements PBI HAS PRE-WIRED THE RECEPTACLES, LIGHT, SWITCH, HVAC AND PBI SUPPLIED LOAD CENTER ATTACHED TO THE BUILDING. FINAL TIE-IN AND DATA/COMMUNICATIONS ARE BY OTHERS. HVAC WALL MOUNT- COOLING & HEATING: 1 EACH The air conditioner shall be 9,000 BTU's of cooling and 11,500 BTU's of heating. The unit shall be a through-the-wall type with panel prep and receptacle prep included. The unit shall be 230/208V, 60HZ, 20AMP FLOOR 2” TALL STEEL FORK LIFTABLE BASE: 1 EACH Finished floor shall be 1/8” diamond plate, pre-welded to the base and both will be powder coated. The base will include a welded angle tab at each corner for attachment to existing concrete surface.

Condition:	Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...	Brand	Panel Built Incorporated
Country/Region of Manufacture	United States
Model	6' x 6' Pre-Assembled Guard House