+ Post new Ad
Guhring gun drills carbide tip still in container Dia 6.070mm length is 22 in, US $58 – Picture 0
Guhring gun drills carbide tip still in container Dia 6.070mm length is 22 in, US $58 – Picture 1
Guhring gun drills carbide tip still in container Dia 6.070mm length is 22 in, US $58 – Picture 0
Guhring gun drills carbide tip still in container Dia 6.070mm length is 22 in, US $58 – Picture 1

Guhring Gun Drills Carbide Tip Still In Container Dia 6.070mm Length Is 22 In

US $58

  • Falconer, New York, United States
  • Jun 9th
Open on mobile:
QR code
lot of 21 pcs Guhring gun drillsall of them still in packaging , all of the carbide tipped Diameter 6.070 mm Length is 22 inches buyer responsible for shipping, will packaged them up and get them ready for shipping
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Brand Guhring

Directions

Similar products from Other Drilling Tools

Keo #31346 1-3/4" 90 deg HSS Left Hand Spotting Drill

Keo #31346 1-3/4" 90 deg HSS Left Hand Spotting Drill

  • Venice, Florida, United States
  • Jun 9th
Kennametal 1613651 0.9220"-0.9417" Dia. Replaceable-Tip Drill Carbide Indexable

Kennametal 1613651 0.9220"-0.9417" Dia. Replaceable-Tip Drill Carbide Indexable

  • Venice, Florida, United States
  • Jun 9th
HSS LONG & SHORT DOUBLE END DRILL COUNTERSINK CENTER DRILLS 8 PIECE SET

HSS LONG & SHORT DOUBLE END DRILL COUNTERSINK CENTER DRILLS 8 PIECE SET

  • Chatham, Ontario, Canada
  • Jun 9th
Accupro - Letter Y, 130 Degree Point Angle, TiAlN Coated, Cobalt Jobber Drill

Accupro - Letter Y, 130 Degree Point Angle, TiAlN Coated, Cobalt Jobber Drill

  • Venice, Florida, United States
  • Jun 9th
IRWIN 39400 3/8" x 24" HSS Installer/Bell Hanger Bit, BRAND NEW

IRWIN 39400 3/8" x 24" HSS Installer/Bell Hanger Bit, BRAND NEW

  • Mesa, Arizona, United States
  • Jun 9th
EXTRA LENGTH #4 COMBINED DRILL & COUNTERSINK COMBINATION DRILL

EXTRA LENGTH #4 COMBINED DRILL & COUNTERSINK COMBINATION DRILL

  • Chino, California, United States
  • Jun 9th
2 KEO #2 COMBINED DRILL & COUNTERSINK COMBINATION DRILLS

2 KEO #2 COMBINED DRILL & COUNTERSINK COMBINATION DRILLS

  • Chino, California, United States
  • Jun 9th
REPUBLIC DRILL 322 HIGH SPEED TAPE LENGHTH STEP DRILL CAP SCREW #

REPUBLIC DRILL 322 HIGH SPEED TAPE LENGHTH STEP DRILL CAP SCREW #

  • SOUTHERN CALIF., United States
  • Jun 9th
DRILL BITS 1/2" HSS BLACK OXIDE (SOLD IN LOTS OF 6) BY CLE-FORCE

DRILL BITS 1/2" HSS BLACK OXIDE (SOLD IN LOTS OF 6) BY CLE-FORCE

  • Statesville, North Carolina, United States
  • Jun 9th
LOT OF MACHINIST Dill Bits / Assorted Sizes 80+ pcs

LOT OF MACHINIST Dill Bits / Assorted Sizes 80+ pcs

  • Cherry Hill, New Jersey, United States
  • Jun 9th
Kennametal Double End Mill .250" x 3/8" 4 Flute DHECW250S4 KC610M Carbide TiN/Ti

Kennametal Double End Mill .250" x 3/8" 4 Flute DHECW250S4 KC610M Carbide TiN/Ti

  • Athens, Georgia, United States
  • Jun 9th
2 KEO 1/2" ? x 6 HSS RH 90° NC Spotting Drill

2 KEO 1/2" ? x 6 HSS RH 90° NC Spotting Drill

  • Waterbury, Connecticut, United States
  • Jun 9th
spotting drills, Combination Drill, Counter Sink mixed lot 1/4, 3/8, 1/2, #4

spotting drills, Combination Drill, Counter Sink mixed lot 1/4, 3/8, 1/2, #4

  • Waterbury, Connecticut, United States
  • Jun 9th
3 KEO 3/8" ? x 5 HSS RH 90° NC Spotting Drill

3 KEO 3/8" ? x 5 HSS RH 90° NC Spotting Drill

  • Waterbury, Connecticut, United States
  • Jun 9th
13/64" Kar Power Core Drill Bits, 79009

13/64" Kar Power Core Drill Bits, 79009

  • Abingdon, Maryland, United States
  • Jun 9th
2 Amec spade drill inserts 152T-0101 Cobalt Tin Brand New 1-1/32"

2 Amec spade drill inserts 152T-0101 Cobalt Tin Brand New 1-1/32"

  • Des Moines, Iowa, United States
  • Jun 9th
AMEC 2-17/32 SPADE DRILL INSERT

AMEC 2-17/32 SPADE DRILL INSERT

  • Akron, Ohio, United States
  • Jun 9th
2 AMEC 1-17/32 SPADE DRILL INSERTS 453H-0117

2 AMEC 1-17/32 SPADE DRILL INSERTS 453H-0117

  • Akron, Ohio, United States
  • Jun 9th
(2) .093 Diameter Reamers.. NIB

(2) .093 Diameter Reamers.. NIB

  • Hampton, Virginia, United States
  • Jun 9th
HERTEL CARTRIDGE TYPE INSERT DRILL

HERTEL CARTRIDGE TYPE INSERT DRILL

  • Berlin, Connecticut, United States
  • Jun 9th

People who viewed this item also vieved

25/32" Extra Length Coolant Fed Thru spindle Feeding Drill bit 14" Long Split pt

25/32" Extra Length Coolant Fed Thru spindle Feeding Drill bit 14" Long Split pt

  • Grand Rapids, Michigan, United States
  • Jan 30th
NEW SURPLUS TRW USA 39/64" EXTRA LENGTH STRAIGHT SHANK COOLANT TWIST DRILL .6094

NEW SURPLUS TRW USA 39/64" EXTRA LENGTH STRAIGHT SHANK COOLANT TWIST DRILL .6094

  • Fairfield, Iowa, United States
  • Jan 30th
USED CLEVELAND USA STUB LENGTH 35/64" STRAIGHT SHANK COOLANT TWIST DRILL .5468"

USED CLEVELAND USA STUB LENGTH 35/64" STRAIGHT SHANK COOLANT TWIST DRILL .5468"

  • Fairfield, Iowa, United States
  • Jan 30th
6" DRILL BIT EXTENSION

6" DRILL BIT EXTENSION

  • Anderson, South Carolina, United States
  • Jan 30th
PRECISION Extra Length Drill 1/2" HSS 118 deg 9" LOC x 12" OAL 059632 <1466>

PRECISION Extra Length Drill 1/2" HSS 118 deg 9" LOC x 12" OAL 059632 <1466>

  • Saint Louis, Missouri, United States
  • Jan 30th
MICHIGAN DRILL 209 7/16 HS STRAIGHT SHANK EXTRA LENGTH DRILL ~ NEW NIB

MICHIGAN DRILL 209 7/16 HS STRAIGHT SHANK EXTRA LENGTH DRILL ~ NEW NIB

  • Sparta, Michigan, United States
  • Jan 30th
Chicago-Latrobe 44042, 21/32&#034;, HSS Jobber Length Drill Bit

Chicago-Latrobe 44042, 21/32", HSS Jobber Length Drill Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
Norseman Drill &amp; Tool Type 190, #2, HSS, HD Jobber Length Drills (12 ea )

Norseman Drill & Tool Type 190, #2, HSS, HD Jobber Length Drills (12 ea )

  • Chillicothe, Missouri, United States
  • Jan 30th
CJT Koolcarb / Rapidkut 1/4&#034; Jobber Length Drill Bit

CJT Koolcarb / Rapidkut 1/4" Jobber Length Drill Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
10 pcs GREENFIELD 13/64&#034; Bright Finish Screw Machine Stub Length HSS Drills USA

10 pcs GREENFIELD 13/64" Bright Finish Screw Machine Stub Length HSS Drills USA

  • Champlain, New York, United States
  • Jan 30th
Precision Twist Drill 1-5/16&#034; Screw Machine Stub Length black oxide EDP 040620

Precision Twist Drill 1-5/16" Screw Machine Stub Length black oxide EDP 040620

  • Champlain, New York, United States
  • Jan 30th
6 new GREENFIELD 25/64&#034; Screw Machine Length Twist Drill bits bright finish USA

6 new GREENFIELD 25/64" Screw Machine Length Twist Drill bits bright finish USA

  • Champlain, New York, United States
  • Jan 30th
OSG 3mm Micro Grain Carbide Jobber Length Twist Drill

OSG 3mm Micro Grain Carbide Jobber Length Twist Drill

  • Siheung-si, Gyeonggi-do, Korea, South
  • Jan 30th
OSG 2mm Micro Grain Carbide Jobber Length Twist Drill

OSG 2mm Micro Grain Carbide Jobber Length Twist Drill

  • Siheung-si, Gyeonggi-do, Korea, South
  • Jan 30th
3/4 Carbide Endmill 4FL SE-X/LG 3 x 6 TIALN

3/4 Carbide Endmill 4FL SE-X/LG 3 x 6 TIALN

  • Windsor, Connecticut, United States
  • Jan 30th
1 1/8 HS DRILL C-L (5 PK)

1 1/8 HS DRILL C-L (5 PK)

  • Prescott Valley, Arizona, United States
  • Jan 30th
1-1/16&#034; Straight Flutes Hand Reamer HSS

1-1/16" Straight Flutes Hand Reamer HSS

  • Chicago, Illinois, United States
  • Jan 30th
Arrow 1.090&#034; Straight Flutes Chucking Reamer #3 Morse Taper

Arrow 1.090" Straight Flutes Chucking Reamer #3 Morse Taper

  • Chicago, Illinois, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies