+ Post new Ad
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 0
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 1
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 2
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 3
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 4
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 0
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 1
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 2
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 3
GUN DRILL LOT of 7 Carbide Tipped/Need Repaired/Sharpened .340 to 1.03 Diameters, US $67 – Picture 4

Gun Drill Lot Of 7 Carbide Tipped/need Repaired/sharpened .340 To 1.03 Diameters

US $67

  • Twinsburg, Ohio, United States
  • Jan 30th
Open on mobile:
QR code
Gun Drill Lot as Shown 3 DAY AUCTION! All have through coolant holes See details below on each drill... 1) .340 Cutting Diameter - 11" Total Length of Drill - Maximum Cutting Depth is about 9 1/4" - Carbide Tip Dull - 5/8" Shank 2) .425 Cutting Diameter - 10 3/4" Total Length of Drill - Maximum Cutting Depth is about 8 1/4" - Carbide Tip Broken - 5/8" Shank 3) .687 Cutting Diameter - 14 1/2" Total Length of Drill - Maximum Cutting Depth is about 12" - Carbide Tip Chipped up pretty good - 1" Shank 4) .720 Cutting Diameter - 16 5/8" Total Length of Drill - Maximum Cutting Depth is about 14" - Carbide Tip Chunk broken off - 1" Shank 5) .750 Cutting Diameter - 16 1/2" Total Length of Drill - Maximum Cutting Depth is about 14" - Carbide Tip Broken  - 1" Shank 6) .780 Cutting Diameter - 23 1/2" Total Length of Drill - Maximum Cutting Depth is about 21" - Carbide Tip Chipped up  - 1" Shank 7) 1.030 Cutting Diameter - 22" Total Length of Drill - Maximum Cutting Depth is about 19" - Carbide Tip Broken  - 1 3/8" Shank ( Coolant hole may be plugged ) Shipping is estimated at 7 to 8 pounds Shipping could be less if you do not want them all due to the weight Different shipping options are available. You choose the one that works for you. I do combine shipping whenever possible to save you as much as I can
Condition Used :
An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes “See description below...”

Directions

Similar products from Extended Length Drills

PTD Precision Twist 7/8" x 5/8" X 10.5" Length Drill Bit HS Black Oxide

PTD Precision Twist 7/8" x 5/8" X 10.5" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 3/4" x 1/2" X 10" Length Drill Bit HS Black Oxide

PTD Precision Twist 3/4" x 1/2" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 3/4" x 5/8" X 10" Length Drill Bit HS Black Oxide

PTD Precision Twist 3/4" x 5/8" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 3/4" x 9/16" X 10" Length Drill Bit HS Black Oxide

PTD Precision Twist 3/4" x 9/16" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 3/4" X 10" Length Drill Bit HS Black Oxide

PTD Precision Twist 3/4" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 51/64" X 3/4" X 10" Length Drill Bit HS Black Oxide

PTD Precision Twist 51/64" X 3/4" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 13/16" X 5/8" X 10.25" Length Drill Bit HS Black Oxide

PTD Precision Twist 13/16" X 5/8" X 10.25" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 3/4" X 1/2" X 5/8" X 10" Length Drill Bit HS Black Oxide

PTD Precision Twist 3/4" X 1/2" X 5/8" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 7/8" X 1/2" X 5/8" X 10" Length Drill Bit HS Black Oxide

PTD Precision Twist 7/8" X 1/2" X 5/8" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PTD Precision Twist 7/8" X 3/4" X 10.5" Length Drill Bit HS Black Oxide

PTD Precision Twist 7/8" X 3/4" X 10.5" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
HERCULES Twist 55/64" X 1/2" X 9.5" Length Drill Bit HS Black Oxide

HERCULES Twist 55/64" X 1/2" X 9.5" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
Twist DRILL 3/4" X 1/2" X 8.25" Length Drill Bit HS Black Oxide

Twist DRILL 3/4" X 1/2" X 8.25" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
Twist DRILL 21/32" X 9" Length Drill Bit HS Black Oxide

Twist DRILL 21/32" X 9" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
Twist DRILL 3/4X 1/2" X 10" Length Drill Bit HS Black Oxide

Twist DRILL 3/4X 1/2" X 10" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
MILLING TWIST DRILL 15/16" X 1/2" X 9" Length Drill Bit HS Black Oxide

MILLING TWIST DRILL 15/16" X 1/2" X 9" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PRECISION TWIST DRILL 11/16" X 7.75" Length Drill Bit HS Black Oxide

PRECISION TWIST DRILL 11/16" X 7.75" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PRECISION TWIST DRILL 19/32" X 7.5" Length Drill Bit HS Black Oxide

PRECISION TWIST DRILL 19/32" X 7.5" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
PRECISION TWIST DRILL 11/16" X 8" Length Drill Bit HS Black Oxide

PRECISION TWIST DRILL 11/16" X 8" Length Drill Bit HS Black Oxide

  • East Bethany, New York, United States
  • Jan 30th
TAPER SHANK 33/64" X 6.75" DRILL BIT HIGH SPEED NATIONAL DETROIT

TAPER SHANK 33/64" X 6.75" DRILL BIT HIGH SPEED NATIONAL DETROIT

  • East Bethany, New York, United States
  • Jan 30th
Machinist tool tools Long Series Drill Set HSS Multiple Sizes From #23 to 7/16"

Machinist tool tools Long Series Drill Set HSS Multiple Sizes From #23 to 7/16"

  • British Columbia, Canada
  • Jan 30th

People who viewed this item also vieved

Guhring Drills, Series 05511 (Lot of Drills)

Guhring Drills, Series 05511 (Lot of Drills)

  • Meadville, Pennsylvania, United States
  • Jan 30th
Ridge 18V Cordless Drill

Ridge 18V Cordless Drill

  • San Jose, California, United States
  • Jan 30th
Guhring No. 02485-20,240 (Lot of 2pcs)

Guhring No. 02485-20,240 (Lot of 2pcs)

  • Meadville, Pennsylvania, United States
  • Jan 30th
Fullerton Tool drill bit 3215SD .7500 RH SE 1.5000x4.000 EM 2 FL.

Fullerton Tool drill bit 3215SD .7500 RH SE 1.5000x4.000 EM 2 FL.

  • Florence, Missouri, United States
  • Feb 24th
DORMER R002 TIN CARBIDE JOBBER DRILL 27/64"

DORMER R002 TIN CARBIDE JOBBER DRILL 27/64"

  • Meridian, Idaho, United States
  • Feb 24th
1/4" SWIFTCARB 90 DEGREE SPOT DRILL EDP#DNC.2500CB90MDC

1/4" SWIFTCARB 90 DEGREE SPOT DRILL EDP#DNC.2500CB90MDC

  • Meridian, Idaho, United States
  • Feb 24th
4 MORSE TAPER 1 7/64" x 13" DRILL BIT lathe mill mt tool NACHI JAPAN

4 MORSE TAPER 1 7/64" x 13" DRILL BIT lathe mill mt tool NACHI JAPAN

  • Milroy, Indiana, United States
  • Feb 25th
4 MORSE TAPER 1 5/16" x 13 1/2" DRILL BIT lathe mill mt tool STANDARD USA

4 MORSE TAPER 1 5/16" x 13 1/2" DRILL BIT lathe mill mt tool STANDARD USA

  • Milroy, Indiana, United States
  • Feb 25th
4 MORSE TAPER 1 3/8" x 10 1/2" DRILL BIT lathe mill mt tool CLE-FORGE USA

4 MORSE TAPER 1 3/8" x 10 1/2" DRILL BIT lathe mill mt tool CLE-FORGE USA

  • Milroy, Indiana, United States
  • Feb 25th
LOT OF 4 WHALLEY EXTRA LENGTH COOLANT FED TWIST DRILLS 1/4" TO 1/2"

LOT OF 4 WHALLEY EXTRA LENGTH COOLANT FED TWIST DRILLS 1/4" TO 1/2"

  • Ellington, New York, United States
  • Feb 27th
YG-1 ZF0302 Indexable Dream Drill Holder 3xD Coolant Fed w/ Insert

YG-1 ZF0302 Indexable Dream Drill Holder 3xD Coolant Fed w/ Insert

  • Round Lake, Illinois, United States
  • Feb 27th
LOT OF 5 HSS CHUCK SHANK WHALLEY COOLANT FED TWIST DRILLS 1/4" TO 1/2"

LOT OF 5 HSS CHUCK SHANK WHALLEY COOLANT FED TWIST DRILLS 1/4" TO 1/2"

  • Ellington, New York, United States
  • Feb 27th
MAGNUM NORSEMAN SP-115 1/2 SUPER PREMIUM BLACK GOLD DRILL BIT SET MADE IN USA

MAGNUM NORSEMAN SP-115 1/2 SUPER PREMIUM BLACK GOLD DRILL BIT SET MADE IN USA

  • Los Angeles, California, United States
  • Mar 7th
LOT OF 10 DRILL BITS [ see photos ]

LOT OF 10 DRILL BITS [ see photos ]

  • El Monte, California, United States
  • Mar 7th
BULK LOT (2) 19/32" Nachi straight shank industrial drill bit, Jobbers length

BULK LOT (2) 19/32" Nachi straight shank industrial drill bit, Jobbers length

  • Middle Island, New York, United States
  • Mar 7th
Lot of 4 Resharpened Cobalt Screw Machine Length Drills 5/8, 19/32, 37/64,35/64

Lot of 4 Resharpened Cobalt Screw Machine Length Drills 5/8, 19/32, 37/64,35/64

  • Glendale, Arizona, United States
  • Apr 26th
"PTD" 6 inch' Twist Drill Bits, sizes 3/16 7/16 1/64 7/16 25/64

"PTD" 6 inch' Twist Drill Bits, sizes 3/16 7/16 1/64 7/16 25/64

  • Lancaster, California, United States
  • Apr 26th
9/64" Stuby (Stubby) Black Oxide High Speed Drill Bit 135° 1/4 Shank USA-Pk of 6

9/64" Stuby (Stubby) Black Oxide High Speed Drill Bit 135° 1/4 Shank USA-Pk of 6

  • Brunswick, Georgia, United States
  • Apr 27th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies