+ Post new Ad
haas or okuma tool post coolant block., US $4500 – Picture 0
haas or okuma tool post coolant block., US $4500 – Picture 1
haas or okuma tool post coolant block., US $4500 – Picture 2
haas or okuma tool post coolant block., US $4500 – Picture 3
haas or okuma tool post coolant block., US $4500 – Picture 0
haas or okuma tool post coolant block., US $4500 – Picture 1
haas or okuma tool post coolant block., US $4500 – Picture 2
haas or okuma tool post coolant block., US $4500 – Picture 3

Haas Or Okuma Tool Post Coolant Block.

US $4500

  • Hopkins, Minnesota, United States
  • Jan 30th
Open on mobile:
QR code
These are coolant blocks that mount to the turret to direct coolant when used with a turret mounted tool. They have a 70mm centerline bolt pattern and use 10mm bolts for mounting. This auction is for two coolant blocks as pictured. They are used but in working condition. They use but do not include the 1/2" spherical coolant nozzles typical on many of these type of machines.
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Brand Okuma

Directions

Similar products from Tools for Lathe Machines

Facing Turning Boring Lathe VDF Model V5 Through Hole 5 1/4"

Facing Turning Boring Lathe VDF Model V5 Through Hole 5 1/4"

  • Eugene, Oregon, United States
  • Jan 30th
* J.H. WILLIAMS RIGHT metal lathe cut off parting tool holder RIGHT

* J.H. WILLIAMS RIGHT metal lathe cut off parting tool holder RIGHT

  • Spring Valley, California, United States
  • Jan 30th
* J.H. WILLIAMS RIGHT metal lathe cut off parting tool holder LEFT # 33

* J.H. WILLIAMS RIGHT metal lathe cut off parting tool holder LEFT # 33

  • Spring Valley, California, United States
  • Jan 30th
* J.H. WILLIAMS metal lathe TURNINGtool holder LEFT # 3

* J.H. WILLIAMS metal lathe TURNINGtool holder LEFT # 3

  • Spring Valley, California, United States
  • Jan 30th
Vintage 3/4" Square Drive Lathe Wrench

Vintage 3/4" Square Drive Lathe Wrench

  • Spring Valley, California, United States
  • Jan 30th
Vintage 9/16" Square Drive Lathe Wrench OFF SET

Vintage 9/16" Square Drive Lathe Wrench OFF SET

  • Spring Valley, California, United States
  • Jan 30th
Vintage 3/8" Square Drive Lathe Wrench

Vintage 3/8" Square Drive Lathe Wrench

  • Spring Valley, California, United States
  • Jan 30th
ATLAS CRAFTSMAN LATHE 10D-247 HEADSTOCK GEAR GUARD

ATLAS CRAFTSMAN LATHE 10D-247 HEADSTOCK GEAR GUARD

  • Niles, Michigan, United States
  • Jan 30th
haas 3/4" tool post face turn

haas 3/4" tool post face turn

  • Hopkins, Minnesota, United States
  • Jan 30th
Hydraulic Tracer Lathe Churchill Redman Model 14 x 60

Hydraulic Tracer Lathe Churchill Redman Model 14 x 60

  • Eugene, Oregon, United States
  • Jan 30th
aloris axa1 axa 7 tool holder Lathe

aloris axa1 axa 7 tool holder Lathe

  • Bloomdale, Ohio, United States
  • Jan 30th
ATLAS-CRAFTSMAN LATH GEAR SET OF 11 / WRENCH & EXTRAS

ATLAS-CRAFTSMAN LATH GEAR SET OF 11 / WRENCH & EXTRAS

  • Epsom, New Hampshire, United States
  • Jan 30th
DTM TP75A QuickChange Lathe Tool Post Holder

DTM TP75A QuickChange Lathe Tool Post Holder

  • Albion, Indiana, United States
  • Jan 30th
Monarch Tool Room Lathe 1610T x 30 16" Swing 2" Bore

Monarch Tool Room Lathe 1610T x 30 16" Swing 2" Bore

  • Eugene, Oregon, United States
  • Jan 30th
Omni Turn Hardinge CNC Lathe

Omni Turn Hardinge CNC Lathe

  • Wilmington, Delaware, United States
  • Jan 30th
South bend 13" inch metal lathe 13 lead screw cover oil trough apron

South bend 13" inch metal lathe 13 lead screw cover oil trough apron

  • Belvidere, New Jersey, United States
  • Jan 30th
Unimat SL 1000 Miniture Metal Lathe

Unimat SL 1000 Miniture Metal Lathe

  • Pasadena, California, United States
  • Jan 30th
Atlas Craftsman 6" MARK II Model 3950 Lathe in good condition

Atlas Craftsman 6" MARK II Model 3950 Lathe in good condition

  • Hockessin, Delaware, United States
  • Jan 30th
Jacobs AD50-74 Spindle Nose Lathe Chuck

Jacobs AD50-74 Spindle Nose Lathe Chuck

  • Garden City, Idaho, United States
  • Jan 30th
Geometric DSA-P58 9/16" Die Head

Geometric DSA-P58 9/16" Die Head

  • Garden City, Idaho, United States
  • Jan 30th

People who viewed this item also vieved

Milling Machine Vise & Swivel Base LARGE 13-1/2" Cincinnati Kearney & Trecker

Milling Machine Vise & Swivel Base LARGE 13-1/2" Cincinnati Kearney & Trecker

  • Johnson City, Tennessee, United States
  • Mar 4th
Bridgeport Mill Milling Machine Knee Replacement Ballscrew 1.5” Diameter 6824-12

Bridgeport Mill Milling Machine Knee Replacement Ballscrew 1.5” Diameter 6824-12

  • Boise, Idaho, United States
  • Mar 4th
24 Pcs.Clamp Kit Set-6 mm suitable for Milling Table,Face Plates &Vertical Slide

24 Pcs.Clamp Kit Set-6 mm suitable for Milling Table,Face Plates &Vertical Slide

  • Delhi, DELHI, India
  • Mar 4th
Used Ohler 1500 Saw Blade Sharpening Machine

Used Ohler 1500 Saw Blade Sharpening Machine

  • Summerville, South Carolina, United States
  • Mar 12th
3" x 132" Stephen Bader Grinding & Polishing Machine

3" x 132" Stephen Bader Grinding & Polishing Machine

  • Granger, Iowa, United States
  • Mar 12th
GRINDING WHEEL DRESSER / DRESSING TOOL

GRINDING WHEEL DRESSER / DRESSING TOOL

  • Miami, Florida, United States
  • Mar 12th
125 KVA 24" Thrt Frank Brandt 125 KVA SPOT WELDER, Model 105 iii Control

125 KVA 24" Thrt Frank Brandt 125 KVA SPOT WELDER, Model 105 iii Control

  • Harrison, New Jersey, United States
  • Mar 12th
Wilson-Rockwell SERIES 500 HARDNESS TESTER, B & C

Wilson-Rockwell SERIES 500 HARDNESS TESTER, B & C

  • Harrison, New Jersey, United States
  • Mar 12th
3" Dia. 12' L ft Iemca MASTER 880MP BAR FEED, Channel Sets: 1", 2.5" & 3"

3" Dia. 12' L ft Iemca MASTER 880MP BAR FEED, Channel Sets: 1", 2.5" & 3"

  • Harrison, New Jersey, United States
  • Mar 12th
BALAX 5/16 - 18 BH7 THREAD FORMING TAP

BALAX 5/16 - 18 BH7 THREAD FORMING TAP

  • Elkhart Lake, Wisconsin, United States
  • Mar 28th
ARO Self Feed Drill 8245-45-2 jacobs chuck matching set of 4

ARO Self Feed Drill 8245-45-2 jacobs chuck matching set of 4

  • Sparta, Michigan, United States
  • Mar 28th
50 NEW 10 - 32 X .285" Helicoil Thread Inserts

50 NEW 10 - 32 X .285" Helicoil Thread Inserts

  • Meriden, Connecticut, United States
  • Mar 28th
KWIK-LOK Alligator Clips Side CLECOS Heavy Duty LOT OF 12

KWIK-LOK Alligator Clips Side CLECOS Heavy Duty LOT OF 12

  • Haysville, Kansas, United States
  • May 24th
Amada Aries Y-axis motor

Amada Aries Y-axis motor

  • Wauconda, Illinois, United States
  • May 24th
Vintage LARGE Sharp 9+in LONG heavy Fabric Scissors Peeking Shears "JOY" USA

Vintage LARGE Sharp 9+in LONG heavy Fabric Scissors Peeking Shears "JOY" USA

  • Stroudsburg, Pennsylvania, United States
  • May 24th
Woodruff Key Seat Cutters Set Of 3

Woodruff Key Seat Cutters Set Of 3

  • Ansonia, Connecticut, United States
  • May 24th
Hardinge 5V 3/8" Collet

Hardinge 5V 3/8" Collet

  • Ansonia, Connecticut, United States
  • May 24th
SUNNEN HONE W47-A43 STONE SET STK 2658

SUNNEN HONE W47-A43 STONE SET STK 2658

  • Wadley, Alabama, United States
  • May 24th
MITSUBISHI .012" DIAMETER WIRE EDM .30mm LOWER AF2/AF3 DIAMOND GUIDES A509

MITSUBISHI .012" DIAMETER WIRE EDM .30mm LOWER AF2/AF3 DIAMOND GUIDES A509

  • Oconomowoc, Wisconsin, United States
  • May 25th
NEW GENUINE OEM MITSUBISHI CERAMIC 8mm LOWER FLUSHING CUP, WITHOUT FLAT

NEW GENUINE OEM MITSUBISHI CERAMIC 8mm LOWER FLUSHING CUP, WITHOUT FLAT

  • Oconomowoc, Wisconsin, United States
  • May 25th
MITSUBISHI 110 200 H1 HA AF NEW OEM WIRE EDM LOWER CERAMIC ISOLATION PLATE M661

MITSUBISHI 110 200 H1 HA AF NEW OEM WIRE EDM LOWER CERAMIC ISOLATION PLATE M661

  • Oconomowoc, Wisconsin, United States
  • May 25th
20" Thrt 13" H DoAll 2013-U VERTICAL BAND SAW, Vari-Speed, Tilt Tbl, Blade Welde

20" Thrt 13" H DoAll 2013-U VERTICAL BAND SAW, Vari-Speed, Tilt Tbl, Blade Welde

  • Harrison, New Jersey, United States
  • May 25th
18" Thrt 22" H Marvel SERIES 8 MARK I VERTICAL BAND SAW, Tilt Frame,Vari-Speed,1

18" Thrt 22" H Marvel SERIES 8 MARK I VERTICAL BAND SAW, Tilt Frame,Vari-Speed,1

  • Harrison, New Jersey, United States
  • May 25th
Scotchman cold saw 14" industrial hydraulic feed/vice commercial metal working

Scotchman cold saw 14" industrial hydraulic feed/vice commercial metal working

  • Ventura, California, United States
  • May 25th
H&G Die Head Thread Chaser Style DMN Size 101

H&G Die Head Thread Chaser Style DMN Size 101

  • Unionville, Connecticut, United States
  • May 26th
DAVENPORT / SALVO THREAD ROLL ATT. WITH SLIDE

DAVENPORT / SALVO THREAD ROLL ATT. WITH SLIDE

  • Churchville, New York, United States
  • May 26th
10 PCS SARMASAG TNMC 32 NGR.050 SG5 CARBIDE INSERTS GROOVE / USA

10 PCS SARMASAG TNMC 32 NGR.050 SG5 CARBIDE INSERTS GROOVE / USA

  • Houston, Texas, United States
  • May 26th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies