+ Post new Ad
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 0
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 1
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 2
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 3
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 0
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 1
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 2
Hard Chuck Jaws 2 sets outside type 4" chuck Buck Cushman Bison unkown chuck, US $640 – Picture 3

Hard Chuck Jaws 2 Sets Outside Type 4" Chuck Buck Cushman Bison Unkown Chuck

US $640

  • Houston, Texas, United States
  • Mar 2nd
Open on mobile:
QR code
Two sets of outside type jaws for 4"(?) chucks measurements below Left set outside type hard chuck jaws measurements OAL 1.68" Width .55 Key inside width .30 Key width .225" tooth to key slot .235 TPI = 4 Right set outside type hard chuck jaws measurements OAL 1.74" Width .49 Key inside width .27 Key width .187" tooth to key slot .200 TPI = 5 My best guess is these are for a unkown 4" chuck. Both sets have staining but all working surfaces are good
Condition:
For parts or not working: An item that does not function as intended and is not fully operational. This includes items that are defective in ways that render them difficult to use, items that require service or repair, or items missing essential components. See the seller’s listing for full details. ...
Manufacturer Unown

Directions

Similar products from Lathe Chucks

BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION

BROWN & SHARPE 510-4 MICRO MESH PERMANENT MAGNET CHUCK VERY GOOD USED CONDITION

  • Woodbury, Connecticut, United States
  • Mar 2nd
5" Bison 3-Jaw Lathe Chuck w/ 2-1/4" Th'd Back Plate

5" Bison 3-Jaw Lathe Chuck w/ 2-1/4" Th'd Back Plate

  • Slaughter, Louisiana, United States
  • Mar 2nd
Kitagawa chuck B-207 power Chuck 3 jaw

Kitagawa chuck B-207 power Chuck 3 jaw

  • Ortonville, Michigan, United States
  • Mar 2nd
MACHINIST LATHE MILL UNION 4 Jaw Lathe Chuck 6" 1 1/2" Center

MACHINIST LATHE MILL UNION 4 Jaw Lathe Chuck 6" 1 1/2" Center

  • Morris Plains, New Jersey, United States
  • Mar 2nd
SWEETLAND Chucks No. X1 Chuck - w/orig box - The Hoggson & Pettis MFG Co - USA

SWEETLAND Chucks No. X1 Chuck - w/orig box - The Hoggson & Pettis MFG Co - USA

  • O'Fallon, Missouri, United States
  • Mar 2nd
DRILL CHUCK, 23T3 SUPREME CHUCK, 0-1/2

DRILL CHUCK, 23T3 SUPREME CHUCK, 0-1/2

  • Norwalk, California, United States
  • Mar 2nd
Vintage Fowler T - Handle Chuck Key 1/4 Inch Square Head Wrench Lathe

Vintage Fowler T - Handle Chuck Key 1/4 Inch Square Head Wrench Lathe

  • Cicero, Indiana, United States
  • Mar 2nd
Buck T - Handle Lathe Jaw Chuck Key 1/4 Inch Square Head Wrench vtg

Buck T - Handle Lathe Jaw Chuck Key 1/4 Inch Square Head Wrench vtg

  • Cicero, Indiana, United States
  • Mar 2nd
Walker Magnetics Electromagnetic Interloc 20"x40" grinding chuck 68-AXM8348

Walker Magnetics Electromagnetic Interloc 20"x40" grinding chuck 68-AXM8348

  • Hyde Park, Massachusetts, United States
  • Mar 2nd
CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

CUSHMAN 3 JAW CHUCK WITH KEY 7 1/2" INCH ATLAS SOUTH BEND CLAUSING LATHE TOOL

  • Toms River, New Jersey, United States
  • Mar 2nd
6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

6.00 inches Lathe chuck. Back plate is 2.25x 8 tpi

  • Bloomington, California, United States
  • Mar 2nd
8" 6-JAW SELF-CENTERING LATHE CHUCK w.solid jaws--0.003" TIR #K13-200---new

8" 6-JAW SELF-CENTERING LATHE CHUCK w.solid jaws--0.003" TIR #K13-200---new

  • Madison Heights, Michigan, United States
  • Mar 1st
No. 2 Bohle (German) Plain Horizontal Milling Machine

No. 2 Bohle (German) Plain Horizontal Milling Machine

  • Libertyville, Illinois, United States
  • Mar 1st
15" CNC Lathe Chuck Jaw Tools 3 T Nuts+6 Bolts 151JN

15" CNC Lathe Chuck Jaw Tools 3 T Nuts+6 Bolts 151JN

  • Columbus, Ohio, United States
  • Mar 1st
6 inch Buck chuck backplate Carroll Ellis

6 inch Buck chuck backplate Carroll Ellis

  • Kaneohe, Hawaii, United States
  • Mar 1st
Buck Accujust 8.25" Chuck w/ Hard & Soft Jaws Exlnt Used Condition Smooth Scroll

Buck Accujust 8.25" Chuck w/ Hard & Soft Jaws Exlnt Used Condition Smooth Scroll

  • Santa Monica, California, United States
  • Mar 1st
CUSHMAN 9" THREE JAW CHUCK 8TPI MACHINIST TOOL LATHE MILL

CUSHMAN 9" THREE JAW CHUCK 8TPI MACHINIST TOOL LATHE MILL

  • Lake Hiawatha, New Jersey, United States
  • Mar 1st
4 1/2" THREE JAW BUCK CHUCK MACHINIST TOOL LATHE MILL

4 1/2" THREE JAW BUCK CHUCK MACHINIST TOOL LATHE MILL

  • Lake Hiawatha, New Jersey, United States
  • Mar 1st
CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8

CUSHMAN REF NO 5340B 3 JAW 5" SCROLL CHUCK 4 SOUTH BEND 9 10K LATHE 1 1/2" x 8

  • United States
  • Mar 1st
NEW Steelex M1057 3 Jaw Chuck 4-Inch

NEW Steelex M1057 3 Jaw Chuck 4-Inch

  • United States
  • Mar 1st

People who viewed this item also vieved

19Pcs. Tecnopinz ETS-32 Swiss Made Collets

19Pcs. Tecnopinz ETS-32 Swiss Made Collets

  • Newark, New Jersey, United States
  • Jan 30th
Pair of #4 WARNER & SWASEY STYLE STEEL EMERGENCY COLLET PADS

Pair of #4 WARNER & SWASEY STYLE STEEL EMERGENCY COLLET PADS

  • Kearney, Nebraska, United States
  • Jan 30th
5C Collet Fixture

5C Collet Fixture

  • Berlin, Connecticut, United States
  • Jan 30th
High clamping forces Janetech S + J due to conical sleeves BK4/60/72

High clamping forces Janetech S + J due to conical sleeves BK4/60/72

  • Ashdod, Israel
  • Jan 30th
Brown & Sharpe Index Head

Brown & Sharpe Index Head

  • Ashland, Ohio, United States
  • Jan 30th
Aluminum Machinist Collet Fixture Plate Table 9 x 8 x 1" Thick, 2 x 1/2" Holes

Aluminum Machinist Collet Fixture Plate Table 9 x 8 x 1" Thick, 2 x 1/2" Holes

  • Cornell, Illinois, United States
  • Jan 30th
LOT OF 2 MDC - 701002 - Hinged Clamp

LOT OF 2 MDC - 701002 - Hinged Clamp

  • Bridgeview, Illinois, United States
  • Feb 13th
Inside/Outside Calipers: Exc. Shape

Inside/Outside Calipers: Exc. Shape

  • Glastonbury, Connecticut, United States
  • Feb 13th
New Cush-A-Clamp 034T040 2 1/8" Tube OD #41509

New Cush-A-Clamp 034T040 2 1/8" Tube OD #41509

  • Holly, Michigan, United States
  • Feb 13th
PORTAMATE Model PM-7060 Mega Vise III Portable Vise Stand Workclamp IOB

PORTAMATE Model PM-7060 Mega Vise III Portable Vise Stand Workclamp IOB

  • Bloomington, Indiana, United States
  • Feb 14th
Machinist / Tool Maker / Tool & Die Precision Grind Vise

Machinist / Tool Maker / Tool & Die Precision Grind Vise

  • Yale, Michigan, United States
  • Feb 14th
Record Quick Vise

Record Quick Vise

  • Tucson, Arizona, United States
  • Feb 14th
Short Number 5 Morse Taper Center,Lathe,Rotary Table,Indexer

Short Number 5 Morse Taper Center,Lathe,Rotary Table,Indexer

  • Maumee, Ohio, United States
  • Feb 15th
2 1/2" Bull Nose Center and a Half center

2 1/2" Bull Nose Center and a Half center

  • Maumee, Ohio, United States
  • Feb 15th
VERY NICE MT2 LIVE CENTER READY TOOL CO 110-R2 LATHE MACHINIST TOOL

VERY NICE MT2 LIVE CENTER READY TOOL CO 110-R2 LATHE MACHINIST TOOL

  • United States
  • Feb 15th
Enderes Tool Co. Anvil

Enderes Tool Co. Anvil

  • Phoenix, Arizona, United States
  • Feb 28th
YUASA 6 X 4 ADJUSTABLE ANGLE TILTING ANGLE PLATE .0006"

YUASA 6 X 4 ADJUSTABLE ANGLE TILTING ANGLE PLATE .0006"

  • Durham, North Carolina, United States
  • Feb 28th
Starrett 154B Adjustable Parallels - Height: 1/2"~11/16"

Starrett 154B Adjustable Parallels - Height: 1/2"~11/16"

  • Lebanon, Illinois, United States
  • Feb 28th
machinist milling hold down blocks

machinist milling hold down blocks

  • Farmington, Michigan, United States
  • May 19th
Starrett Hold Downs No. 54B

Starrett Hold Downs No. 54B

  • Pittsfield, New Hampshire, United States
  • May 20th
Northwestern Tools Step Blocks 3 sets 2S

Northwestern Tools Step Blocks 3 sets 2S

  • Palatine, Illinois, United States
  • May 20th
(1) Scheld GmbH E70 4,000-Lbs Capacity Welding Positioner - Used - AM14010

(1) Scheld GmbH E70 4,000-Lbs Capacity Welding Positioner - Used - AM14010

  • Cleveland, Ohio, United States
  • Jun 7th
Palmgren 9634102 Rotary Cross Slide Table 10" #183

Palmgren 9634102 Rotary Cross Slide Table 10" #183

  • San Mateo, California, United States
  • Jun 8th
3 Way Cross Slide Table

3 Way Cross Slide Table

  • Rochester, New York, United States
  • Jun 8th
"Die-Namites Die-Flower Scroll, 3.375""X3.5625"""

"Die-Namites Die-Flower Scroll, 3.375""X3.5625"""

  • Hickory Hills, Illinois, United States
  • May 25th
Royal Heavy Duty Bar Puller P/N 43370

Royal Heavy Duty Bar Puller P/N 43370

  • Catskill, New York, United States
  • May 25th
ETM NMTB 50 ER50 COLLET CHUCK STK 5742

ETM NMTB 50 ER50 COLLET CHUCK STK 5742

  • Wadley, Alabama, United States
  • May 25th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies