+ Post new Ad
Hardened, Precision Tool Maker Grinding Step Blocks, US $295.00 – Picture 0
Hardened, Precision Tool Maker Grinding Step Blocks, US $295.00 – Picture 0

Hardened, Precision Tool Maker Grinding Step Blocks

US $295.00

  • Hazleton, Pennsylvania, United States
  • Aug 9th
Open on mobile:
QR code
Hardened, Precision Tool Maker Grinding Step Blocks. Must have for the serious tool maker. Set of three blocks with brass clamps, dowel pins, and custom wooden cases. Block Sizes: * Small = 1 1/2” x 2”x 2 3/4” L. Has four steps with 3/16 and 1/4” reamed holes for dowel stops. * Medium = 2 1/2” x 2 5/8” x 4” L. Has four steps with 3/16”, 1/4” and 3/8” reamed holes for dowel stops. * Large = 2 1/4” x 2 7/8” x 5” L. Has one step (3/4” x 1”) with 3/8” reamed holes for dowel stops. * Free shipping in the lower 48
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Block Type Step Block

Directions

Similar products from Supporting Blocks & Sets

9 Pair 18Pcs Precise 1/8" Wavy Hardened Steel Parallel Parallels .0002"

9 Pair 18Pcs Precise 1/8" Wavy Hardened Steel Parallel Parallels .0002"

  • Chino, California, United States
  • Aug 10th
Steel Parallel Set 9 Pair 18Pcs 1/4 inch Thick 6 inch Long 0.0002 inch Precision

Steel Parallel Set 9 Pair 18Pcs 1/4 inch Thick 6 inch Long 0.0002 inch Precision

  • Chino, California, United States
  • Aug 10th
Hertel 32mm H5NG Tool Block for Blade #HBO70075J

Hertel 32mm H5NG Tool Block for Blade #HBO70075J

  • Athens, Georgia, United States
  • Aug 10th
20 Piece 1/32" Thickness Parallel Set, 1/2" to 1-11/16" by 1/16" UTPS20 FF6

20 Piece 1/32" Thickness Parallel Set, 1/2" to 1-11/16" by 1/16" UTPS20 FF6

  • Cochran, Georgia, United States
  • Aug 10th
1/8 parallels twenty piece set

1/8 parallels twenty piece set

  • Batavia, Illinois, United States
  • Aug 10th
PAIR MACHINIST GUAGE BLOCKS BRASS & STEEL TOOL BLOCK

PAIR MACHINIST GUAGE BLOCKS BRASS & STEEL TOOL BLOCK

  • McHenry, Illinois, United States
  • Aug 10th
17PC Precision Angle Block 1/4 to 45 Degree Hardened Steel Set

17PC Precision Angle Block 1/4 to 45 Degree Hardened Steel Set

  • Chino, California, United States
  • Aug 9th
17 PC Hardened Steel Precision Angle Block 1/4 to 45 Degree Set With Case

17 PC Hardened Steel Precision Angle Block 1/4 to 45 Degree Set With Case

  • Monroe Township, New Jersey, United States
  • Aug 9th
VINTAGE MACHINIST V LAYOUT BLOCK

VINTAGE MACHINIST V LAYOUT BLOCK

  • The Villages, Florida, United States
  • Aug 9th
Starrett 384 8 piece Steel Parallel Set

Starrett 384 8 piece Steel Parallel Set

  • Cape Neddick, Maine, United States
  • Aug 9th
Starrett V-Block No. 278 with Clamp - Used

Starrett V-Block No. 278 with Clamp - Used

  • Clarkston, Michigan, United States
  • Aug 9th
8 pc V-Block & Clamp Double Sided 90° Machinist Tool

8 pc V-Block & Clamp Double Sided 90° Machinist Tool

  • Iron Mountain, Michigan, United States
  • Aug 9th
5 Piece Solid Brass 4" Set Up Bar Gauge Blocks 1/8, 3/16, 1/4, 3/8, 1/2" USA

5 Piece Solid Brass 4" Set Up Bar Gauge Blocks 1/8, 3/16, 1/4, 3/8, 1/2" USA

  • Clinton Township, Michigan, United States
  • Aug 8th
MITUTOYO PRECISION INSPECTION V BLOCKS, MODEL 181-904

MITUTOYO PRECISION INSPECTION V BLOCKS, MODEL 181-904

  • Lincoln, Nebraska, United States
  • Aug 8th
Vintage Lufkin No. 905 V Block with 2 Clamps and Original Box

Vintage Lufkin No. 905 V Block with 2 Clamps and Original Box

  • Rancho Cucamonga, California, United States
  • Aug 8th
2 MACHINEIST STEP BLOCKS 6 INCHES LONG

2 MACHINEIST STEP BLOCKS 6 INCHES LONG

  • Chicago, Illinois, United States
  • Aug 8th
TESA BROWN & SHARPE 599-921-10 Parallel Set,10 Pr,1/2 to 1-5/8 In

TESA BROWN & SHARPE 599-921-10 Parallel Set,10 Pr,1/2 to 1-5/8 In

  • Minooka, Illinois, United States
  • Aug 8th
STARRETT 567 V-Block/Clamp Set,1 Ea,

STARRETT 567 V-Block/Clamp Set,1 Ea,

  • Minooka, Illinois, United States
  • Aug 8th
STARRETT 278 V-Block/Clamp Set,2 Ea,1 In Cap

STARRETT 278 V-Block/Clamp Set,2 Ea,1 In Cap

  • Minooka, Illinois, United States
  • Aug 8th
Pair of 1 x 2 x 3 inch Precision Steel 1-2-3 Blocks

Pair of 1 x 2 x 3 inch Precision Steel 1-2-3 Blocks

  • Shenzhen, China
  • Aug 8th

People who viewed this item also vieved

Romania Live Center on a Morse Taper No.4 / MT4 Made in USA

Romania Live Center on a Morse Taper No.4 / MT4 Made in USA

  • West Warwick, Rhode Island, United States
  • Jan 30th
Trade Mark Live Center on a Morse Taper No.3 / MT3 Made in USA

Trade Mark Live Center on a Morse Taper No.3 / MT3 Made in USA

  • West Warwick, Rhode Island, United States
  • Jan 30th
MT1 MT2 HEADSTOCK SPINDLE SLEEVE ARBOR & MT1 DEAD CENTER LATHE TOOL LOT

MT1 MT2 HEADSTOCK SPINDLE SLEEVE ARBOR & MT1 DEAD CENTER LATHE TOOL LOT

  • United States
  • Jan 30th
3 JAW LATHE CHUCK , Made in England , (model # 101-21651)

3 JAW LATHE CHUCK , Made in England , (model # 101-21651)

  • Staten Island, New York, United States
  • Jan 30th
JACOBS CHUCK 32B cap 0-3/8 thread 1/2-20 & TAPERTAIL PIECE JACOBS #32 SERIES KEY

JACOBS CHUCK 32B cap 0-3/8 thread 1/2-20 & TAPERTAIL PIECE JACOBS #32 SERIES KEY

  • Bethel Park, Pennsylvania, United States
  • Jan 30th
DRILL CHUCK JACOBS NO. 0 0-5/32" CAPACITY WITH CHUCK KEY

DRILL CHUCK JACOBS NO. 0 0-5/32" CAPACITY WITH CHUCK KEY

  • Arlington, Texas, United States
  • Jan 30th
1pcs New Toggle Clamp 20300

1pcs New Toggle Clamp 20300

  • Nanjing Jiangsu , China
  • Jan 30th
5pcs New Toggle Clamp 225D

5pcs New Toggle Clamp 225D

  • Nanjing Jiangsu , China
  • Jan 30th
5pcs New Toggle Clamp 102B

5pcs New Toggle Clamp 102B

  • Nanjing Jiangsu , China
  • Jan 30th
Collet Extension w/5/8" Collet 1-1/2" OD x 5-1/2" long TSD Universal #55400

Collet Extension w/5/8" Collet 1-1/2" OD x 5-1/2" long TSD Universal #55400

  • Lebanon, Tennessee, United States
  • Jan 30th
Pratt Burnerd L20 Lever Operated Collet Chuck with 2-1/4”-8 tpi backplate

Pratt Burnerd L20 Lever Operated Collet Chuck with 2-1/4”-8 tpi backplate

  • Unionville, Pennsylvania, United States
  • Jan 30th
Ats Workholding 5C Scroll Chuck SC500A-S100

Ats Workholding 5C Scroll Chuck SC500A-S100

  • Enfield, Connecticut, United States
  • Jan 30th
100TG-0890 57/64 TG Collet Erickson Brand 1pc

100TG-0890 57/64 TG Collet Erickson Brand 1pc

  • Trenton, Michigan, United States
  • Jan 30th
6 NAMCO Collet 15/32 17/32 Inside Threads

6 NAMCO Collet 15/32 17/32 Inside Threads

  • Warwick, New York, United States
  • Jan 30th
Makita Stubby Finder/Driver Retracting Screw set/ kit/ box

Makita Stubby Finder/Driver Retracting Screw set/ kit/ box

  • Newport Beach, California, United States
  • Jan 30th
15-1/2" LATHE FACE PLATE D1-6 MOUNT

15-1/2" LATHE FACE PLATE D1-6 MOUNT

  • Wadley, Alabama, United States
  • Jan 30th
south bend drilled & tapped face plate 8" FPC-100L 2 1/4''-8tpi

south bend drilled & tapped face plate 8" FPC-100L 2 1/4''-8tpi

  • Millstadt, Illinois, United States
  • Jan 30th
Lot of 4 Northwestern #38208 3/8-16 x 5" Studs USA

Lot of 4 Northwestern #38208 3/8-16 x 5" Studs USA

  • Crystal Lake, Illinois, United States
  • Jan 30th
Haas Servo 300 Bar Loader, early 2000's. Capacity- 1/4" - 3.125"

Haas Servo 300 Bar Loader, early 2000's. Capacity- 1/4" - 3.125"

  • Elk Grove Village, Illinois, United States
  • Jan 30th
Davenport Screw Machine Parts Leg Industrial Bar End Bucket Component

Davenport Screw Machine Parts Leg Industrial Bar End Bucket Component

  • Tonawanda, New York, United States
  • Jan 30th
SLIP FIT 1/2 LOCATING PIN 3/4 DIAMETER SHANK 1 15/16 OVER ALL LENGTH #52967

SLIP FIT 1/2 LOCATING PIN 3/4 DIAMETER SHANK 1 15/16 OVER ALL LENGTH #52967

  • Resaca, Georgia, United States
  • Jan 30th
Super 8 Inch Rotary Indexing Fixture -Taiwan

Super 8 Inch Rotary Indexing Fixture -Taiwan

  • Chino, California, United States
  • Jan 30th
Ganro DR-202R 4th axis rotary table set up on Fanuc 0im with motor, drive,cables

Ganro DR-202R 4th axis rotary table set up on Fanuc 0im with motor, drive,cables

  • Biddeford, Maine, United States
  • Jan 30th
ROTARY INDEXER NSK

ROTARY INDEXER NSK

  • Erie, Pennsylvania, United States
  • Jan 30th
Vintage Wilton PowRArm Swivel Base #344 Pow-R-Arm, no Knob

Vintage Wilton PowRArm Swivel Base #344 Pow-R-Arm, no Knob

  • Hailey, Idaho, United States
  • Jan 30th
4" & 6" Dayton Drill Press Vise

4" & 6" Dayton Drill Press Vise

  • Louisville, Kentucky, United States
  • Jan 30th
Maxtech 16014MX Vise Mate INCREASING VISE SIZE 4 INCHES Tool Wood Working Craft

Maxtech 16014MX Vise Mate INCREASING VISE SIZE 4 INCHES Tool Wood Working Craft

  • Columbia, New Jersey, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies