US $180
Condition: |
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully
operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
...
|
Manufacturer | Hardinge |
Model | 5C | ||
Country/Region of Manufacture | United States | ||
MPN | does not apply | ||
Brand | Hardinge |
Directions
Similar products from Metalworking Collets
HARDINGE 3/4" HEXAGON 16C Collet, Used
Hardinge 7/16" # 5C Collet with internal Threads Unit # 3
Hardinge 7/16" # 5C Collet with internal Threads Unit # 4
Chatillon DFGS2 Digital Force Gauge 2 LB
Hardinge 7/16" # 5C Collet with internal Threads Unit # 5
Hardinge 3/8" # 5C Collet with Internal Threads Unit # 1
Hardinge 3/8" #5C Collet with Internal Thread Unit # 2
Hardinge 3/8" # 5C Collet with Internal Threads Unit # 4
Hardinge 3/8 # 5C Collet with internal Threads Unit # 5
Hardinge 23/64 NEW # 5C Collet with Internal Threads Unit # 1
1=Lot of 8-Pc`s Erickson 180DA Collets, Sizes as Noted
NEW TSD AF118 COLLET 7/16" ROUND STK 4565
7/8 5C Collets Type: round Collet Size (Inch):.-875
C-5 Collect Milling Fixture - C-5 Collect Milling Vise Vertical Horizontal mount
MACHINIST TOOLS L1 * HARDINGE 5C EMERGENCY COLLETS * 1 LOT (20)
MACHINIST TOOLS L4 * HARDINGE 5C EMERGENCY COLLETS * 1 LOT (20)
Parallel Set 20 piece Machinist Steel Precision Ground Jig Bar Pittsburgh 789
6 Machinist Collets Hardinge 5C 5C-EN1 Emergency Kent Tool Lot LOOK 729
5C Emergency and 8mm collets 2 pc lot
Warner & Swasey Master collet No. 3
People who viewed this item also vieved
RIGHT ANGLE BLOCK PLATE WORKHOLDING MACHINIST 6" X 5-7/8" HEAVY DUTY
RIGHT ANGLE BLOCK PLATE WORKHOLDING MACHINIST 3-1/4" X 3-1/2"
MAGNETIC MACHINIST PARALLELS TOOLMAKER 1 PAIR ANGLED
USED GORHAM #16 JARNO TAPER CARBIDE TIPPED DEAD CENTER w/ CUT-OUT (2" POINT DIA)
RITEN, 55105, 5MT Xtr Heavy Duty Live Center, Standard Point, Taper Shank, /HF4/
Ready Tool Live Center (Inv.30148)
PAIR of LATHE JAWS MASTER KEYS, DT2508280 for CHUCK SIZE 21-24
Threaded 6" Plain Back 2-1/4"-8 Thread Lathe Chuck
6" 4 Jaw Independent Flat Back Lathe Chuck 4-Jaw
3, VULCAN NO. 68 HOLD DOWN CLAMPING FINGERS MILL BORING GRINDING
2, SWIVEL HOLD DOWN FINGERS CLAMPS BORING MILLING GRINDING MACHINIST
3, SAMSON NO. 110 CLAMP HOLD DOWN FINGERS BORING MILLING GRINDING MACHINIST
NEW Glacern CAT40-ER32-250 Collet Chuck (Rego Fix)
USED NMTB-50 TAPER EXTENDED LENGTH DA100 COLLET CHUCK DA-100 x 12.875"Gage
PARLEC B40-18DC3 DA180 BT40 0.0469 - 0.7500" Alloy Steel Collet Chuck 2H
Ultradex Large Indexer; AA Industries (CTAM# BIGIDXR)
INDUSTRIAL T-SLOT METAL ANGLE PLATE 22.5" x 23" TABLE
MACHINIST TOOLS LATHE MILL Large Work Holding V Block Fixture for Machinist SAV
MAPCO 5/8 X 3 PULL DOWELS 8PCS (D185-8)
MAPCO 5/8 X 2-3/4 PULL DOWELS 20PCS (D182-20)
MAPCO 5/8 X 2-1/4 PULL DOWELS 20PCS (D181-20)
New CNC Tailstock Chuck For 4th-Axis Rotary Axis A Axis Lathe Engraving Machine
Pratt & Whitney 30 Inch Diameter Vertical Rotary table (Inv.29231)
6'' x 6'' Within 0.0002" Fine Pole Magnetic Chuck, #2720-1000
KURT ANGLOCK VISE 8" With Swivel Base
Vintage Cast Iron Columbian No.D63 1/2 3 1/2" Jaws Swivel Anvil Vise Hand Tool
By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.
Accept All Cookies