+ Post new Ad
Hardinge AT Auto Threading Attachment Chucker CT-A NO RESERVE, US $2500 – Picture 0
Hardinge AT Auto Threading Attachment Chucker CT-A NO RESERVE, US $2500 – Picture 0

Hardinge At Auto Threading Attachment Chucker Ct-a No Reserve

US $2500

  • Hawthorne, California, United States
  • Jun 20th
Open on mobile:
QR code
Up for auction is a Hardinge Automatic Threading attachment for the Hardinge Chucker "HC". in good used condition. There are several of these listed on Ebay in similar condition, this one is priced the lowest. We purchased this for some work that never materialized, and shortly after that we got CNC lathes, so we just don't have a use for it. It has some very minor surface rust on the unpainted surfaces, some of which I cleaned off with a Scotch Brite pad in about 5 minutes. It will need the air hoses replaced, which should be an easy fix. I don't have an operator's manual for it (which you will need unless you're experienced with these), but they are available on Ebay from several sellers for $30.00 or less. It's missing the Air regulator/lubricator like most of them are, but any brand will work. You will also need the arm that holds the lead screw follower from the manual Hardinge threading attachment. It is not included with this unit or any of the others listed on Ebay. Like I said we have never used it, so it's sold "as-is". Shipping weight should be about 175 lbs., and I will band it to a pallet & shrink-wrap for free. I might also be able to find you a better rate than what Ebay quotes, or pick up at my shop in Hawthorne, CA. If you have never seen one of these run, here is a video; https://www.youtube.com/watch?v=qCouN2-bH7M Thanks for looking!

Directions

Similar products from Tools for Lathe Machines

South Bend 11" Metal Lathe Feed Reverse Gear Bracket Gears, Model 11-A

South Bend 11" Metal Lathe Feed Reverse Gear Bracket Gears, Model 11-A

  • Ottawa, Illinois, United States
  • Jun 20th
Rockwell 10" Metal Lathe Eccentric Shaft For Back Gear

Rockwell 10" Metal Lathe Eccentric Shaft For Back Gear

  • Ottawa, Illinois, United States
  • Jun 20th
2 HARDINGE C10 LATHE TOOL HOLDERS STK 8837

2 HARDINGE C10 LATHE TOOL HOLDERS STK 8837

  • Wadley, Alabama, United States
  • Jun 20th
South Bend 16" Metal Lathe Spindle Step Pulley Back Gear Gears

South Bend 16" Metal Lathe Spindle Step Pulley Back Gear Gears

  • Ottawa, Illinois, United States
  • Jun 20th
Monarch 12 KK Metal Lathe Feed Screw Support Bracket, Parts

Monarch 12 KK Metal Lathe Feed Screw Support Bracket, Parts

  • Ottawa, Illinois, United States
  • Jun 20th
Monarch 12 KK Metal Lathe Apron Brass Power Feed Worm Gear

Monarch 12 KK Metal Lathe Apron Brass Power Feed Worm Gear

  • Ottawa, Illinois, United States
  • Jun 20th
machinist tool,large metal lathe pipe center,south bend lathe

machinist tool,large metal lathe pipe center,south bend lathe

  • Bennington, New Hampshire, United States
  • Jun 20th
KENNAMETAL A24-NEL3 LATHE TOOLHOLDER INSERT 1094840

KENNAMETAL A24-NEL3 LATHE TOOLHOLDER INSERT 1094840

  • Clermont, Georgia, United States
  • Jun 20th
Warner & Swasey Turret tool holders, lot of six, 1-1/2" bore

Warner & Swasey Turret tool holders, lot of six, 1-1/2" bore

  • Hawthorne, California, United States
  • Jun 20th
Enco 110-1351 Lathe 13x40 with EXTRAS

Enco 110-1351 Lathe 13x40 with EXTRAS

  • West Jefferson, North Carolina, United States
  • Jun 20th
Hardinge Chucker threading attachment cross slide & stop block HC NO RESERVE

Hardinge Chucker threading attachment cross slide & stop block HC NO RESERVE

  • Hawthorne, California, United States
  • Jun 20th
Kennametal CCLPL-204D. Tool holder 1.25" SHANK

Kennametal CCLPL-204D. Tool holder 1.25" SHANK

  • Lake in the Hills, Illinois, United States
  • Jun 20th
Warner & Swasey Edward Andrews #34-01 Slide tool #3, #4 Turret Lathe NR!

Warner & Swasey Edward Andrews #34-01 Slide tool #3, #4 Turret Lathe NR!

  • Hawthorne, California, United States
  • Jun 20th
Lathe Colchester Clausing 15" Lathe w Sony DRO $ 7,999.99 Or your offer! Retire!

Lathe Colchester Clausing 15" Lathe w Sony DRO $ 7,999.99 Or your offer! Retire!

  • Bensenville, Illinois, United States
  • Jun 20th
South bend 10l heavy 10 back gear cover

South bend 10l heavy 10 back gear cover

  • Vega, Texas, United States
  • Jun 20th
Atlas Press Co. STR Tool Holder machinest metal shaper

Atlas Press Co. STR Tool Holder machinest metal shaper

  • Brooksville, Florida, United States
  • Jun 20th
TEC Soft Lathe Chuck Jaws, Steel, Square, 2-1/2", 3", QTY 2 |KG3| RL

TEC Soft Lathe Chuck Jaws, Steel, Square, 2-1/2", 3", QTY 2 |KG3| RL

  • Saint Louis, Missouri, United States
  • Jun 20th
Lot of 10 Carbide Metal Removal Carbide Boring Bar M40668 M40673

Lot of 10 Carbide Metal Removal Carbide Boring Bar M40668 M40673

  • Grand Rapids, Michigan, United States
  • Jun 20th
10 HP Clausing-colchester 17" lathe,3JawChuck,QuickchangeTool Holder $6,000 OBO

10 HP Clausing-colchester 17" lathe,3JawChuck,QuickchangeTool Holder $6,000 OBO

  • New Orleans, Louisiana, United States
  • Jun 20th
Soft Lathe Chuck Jaws Steel, 12" OAH, .5" Groove # 454, QTY 2 |KH2| RL

Soft Lathe Chuck Jaws Steel, 12" OAH, .5" Groove # 454, QTY 2 |KH2| RL

  • Saint Louis, Missouri, United States
  • Jun 20th

People who viewed this item also vieved

H&G Die Head Style EE Size 1 1/2

H&G Die Head Style EE Size 1 1/2

  • Unionville, Connecticut, United States
  • Jan 30th
Strohm 105 Swiss type automatic screw machine

Strohm 105 Swiss type automatic screw machine

  • Miami, Florida, United States
  • Jan 30th
H&G Die Head Style A Size 2

H&G Die Head Style A Size 2

  • Unionville, Connecticut, United States
  • Jan 30th
HeliCoil professional repair kit 5401-5c size 5/16-18

HeliCoil professional repair kit 5401-5c size 5/16-18

  • Elwood, Indiana, United States
  • Jan 30th
hypneumat S200ahb Drill Heads,controls,feeder,built For Double End Drilling

hypneumat S200ahb Drill Heads,controls,feeder,built For Double End Drilling

  • Missoula, Montana, United States
  • Jan 30th
USA!! COIL-SERT 8-32 THREAD REPAIR KIT - #IK401-2

USA!! COIL-SERT 8-32 THREAD REPAIR KIT - #IK401-2

  • Chino, California, United States
  • Jan 30th
Drill EDM Electrodes, Brass Tubes: 0.80(OD) x 400(L) mm, 40 Pcs/Pack

Drill EDM Electrodes, Brass Tubes: 0.80(OD) x 400(L) mm, 40 Pcs/Pack

  • Union City, California, United States
  • Jan 30th
31 Wire EDM Stainless 8mm x 55mm Screws Bolts for System 3R

31 Wire EDM Stainless 8mm x 55mm Screws Bolts for System 3R

  • Millstone Township, New Jersey, United States
  • Jan 30th
Lot of Wire EDM Stainless 8mm Screws Bolts for System 3R

Lot of Wire EDM Stainless 8mm Screws Bolts for System 3R

  • Millstone Township, New Jersey, United States
  • Jan 30th
1 USED SERIES 340-8 CINCINNATI STEEL PRESS BRAKE

1 USED SERIES 340-8 CINCINNATI STEEL PRESS BRAKE

  • Cincinnati, Ohio, United States
  • Jan 30th
Pexto Shear 152 52" Shear with Back Guage and Arms Foot Kick Shear 16 Guage

Pexto Shear 152 52" Shear with Back Guage and Arms Foot Kick Shear 16 Guage

  • Maryland Heights, Missouri, United States
  • Jan 30th
Erco 312 Pneumatic Shrinker Stretcher

Erco 312 Pneumatic Shrinker Stretcher

  • Indianapolis, Indiana, United States
  • Jan 30th
Elliot Precision Roller Burnishing Tool - 2-1/2" Diameter

Elliot Precision Roller Burnishing Tool - 2-1/2" Diameter

  • West Warwick, Rhode Island, United States
  • Jan 30th
Huge Lot Of 53 Files Usa, Sweden Germany India Nicholson, Johnson Diston

Huge Lot Of 53 Files Usa, Sweden Germany India Nicholson, Johnson Diston

  • Kennewick, Washington, United States
  • Jan 30th
SUNNEN STONES - Lot of P28A23 (apr 40pcs )

SUNNEN STONES - Lot of P28A23 (apr 40pcs )

  • Summit-Argo, Illinois, United States
  • Jan 30th
CROWN ENGLAND! 10" X 12" PERMANENT MAGNETIC CHUCK LOW PROFILE

CROWN ENGLAND! 10" X 12" PERMANENT MAGNETIC CHUCK LOW PROFILE

  • Ellington, New York, United States
  • Jan 30th
NICE LOT OF SPINDLE TAPER GAGES JARNO 10 12 + GRINDING TAPERS

NICE LOT OF SPINDLE TAPER GAGES JARNO 10 12 + GRINDING TAPERS

  • Ellington, New York, United States
  • Jan 30th
Brown & Sharpe Linear Metalworking Tool Truing Tangent Radius Dresser Grinder

Brown & Sharpe Linear Metalworking Tool Truing Tangent Radius Dresser Grinder

  • Milpitas, California, United States
  • Jan 30th
Ingersoll Cutting Tools - 3001601 - Indexable Square-Shoulder Face Mills

Ingersoll Cutting Tools - 3001601 - Indexable Square-Shoulder Face Mills

  • United States
  • Jan 30th
Face Mill Cutter 2” w Four Indexable Inserts V.G.C.+

Face Mill Cutter 2” w Four Indexable Inserts V.G.C.+

  • Rome, New York, United States
  • Jan 30th
Kennametal Shell Mill Tooling Holder #S-J-3 Ex.C.++

Kennametal Shell Mill Tooling Holder #S-J-3 Ex.C.++

  • Rome, New York, United States
  • Jan 30th
Fasti Model GE Single Curb Bench Model Chain Making Machine

Fasti Model GE Single Curb Bench Model Chain Making Machine

  • Pawtucket, Rhode Island, United States
  • Jan 30th
LONERO WORK ROLLER ASSEMBLY MAIN #5 V-110,114 DEEP ROLL TOOL HOLDER

LONERO WORK ROLLER ASSEMBLY MAIN #5 V-110,114 DEEP ROLL TOOL HOLDER

  • Euclid, Ohio, United States
  • Jan 30th
Geometric DSA 3/4" Die Head

Geometric DSA 3/4" Die Head

  • Garden City, Idaho, United States
  • Jan 30th
1994 BRIDGEPORT INTERACT MK2 CNC VERTICAL MILL

1994 BRIDGEPORT INTERACT MK2 CNC VERTICAL MILL

  • Pinellas Park, Florida, United States
  • Jan 30th
KM14 14?Abrasive Mitre Saw KALAMAZOO 5hp 3 phase KI14SS 14 inch Miter Saw

KM14 14?Abrasive Mitre Saw KALAMAZOO 5hp 3 phase KI14SS 14 inch Miter Saw

  • Gobles, Michigan, United States
  • Jan 30th
GROB 4 V METAL CUTTING VERTICAL BAND SAW /W BLADE WELDER BAND SAW BLADES

GROB 4 V METAL CUTTING VERTICAL BAND SAW /W BLADE WELDER BAND SAW BLADES

  • Hopkins, Minnesota, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies