+ Post new Ad
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 0
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 1
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 2
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 3
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 4
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 0
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 1
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 2
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 3
Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads, US $395.00 – Picture 4

Hardinge Master Collet Chuck S15 S-15 With 1 5/16 Pads

US $395.00

  • Baldwin Park, California, United States
  • Jan 30th
Open on mobile:
QR code
  Hardinge Master Collet Chuck S15 S-15 with 1 5/16 pads   Up for bidding a  Master Collet Chuck   Local Pick Up  Okay   any other info, just ask.  Will ship to any country. ALL SHIPPING ARRANGEMENTS, COSTS, AND BILL OF LADINGS ARE THE RESPONSIBILITY OF THE BUYER!! There will be a $10.00 Packaging & Handling fee for shipping.   Comes as show in Picture Another Goodie and ready to go a new set of this type sells for several Hundreds over $XXXX.00    buy smart    -    save money  "Made in USA" In excellent working condition  NOTE:  If this chuck is not what you're looking for. just tell me what You need. and and if I have.. is yours     Bid with confidence - Check My feedback Any question 626 536 6202 “Mike” mikemolina@roadrunner.com   Se Habla Espanol   Take a good look at the picture. Thanks for being happy buyer “MAY GOD KEEP ON BLESSING AMERICA”   <><><><><><><><><><><><><><><>
Condition:
Used: An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections. ...
Manufacturer Hardinge
Type master collet set

Directions

Similar products from Collet Chucks & Sets

R8 Round Smooth Collet #10 UNKNOWN

R8 Round Smooth Collet #10 UNKNOWN

  • Lubbock, Texas, United States
  • Jan 30th
R8 Round Smooth Collet 1/4 UNKNOWN

R8 Round Smooth Collet 1/4 UNKNOWN

  • Lubbock, Texas, United States
  • Jan 30th
R8 Round Smooth Collet 1/2 UNKNOWN

R8 Round Smooth Collet 1/2 UNKNOWN

  • Lubbock, Texas, United States
  • Jan 30th
SANDVIK FLEXIGRIP COLLET CHUCK S6-3-C4 *NEW*

SANDVIK FLEXIGRIP COLLET CHUCK S6-3-C4 *NEW*

  • Sunman, Indiana, United States
  • Jan 30th
STARRETT No. 248 LONG DRIVE PIN PUNCHES machinist tools *8

STARRETT No. 248 LONG DRIVE PIN PUNCHES machinist tools *8

  • Thomaston, Connecticut, United States
  • Jan 30th
5C COLLET &#034;TRU-SET&#034; LATHE CHUCK - ON SALE!!!

5C COLLET "TRU-SET" LATHE CHUCK - ON SALE!!!

  • Baton Rouge, Louisiana, United States
  • Jan 30th
5C &#034;TRU-SET&#034; LATHE COLLET CHUCK - D1-4 MOUNT, MACHINIST

5C "TRU-SET" LATHE COLLET CHUCK - D1-4 MOUNT, MACHINIST

  • Baton Rouge, Louisiana, United States
  • Jan 30th
5C &#034;TRU-SET&#034; LATHE CHUCK - 1 1/2&#034; x 8 TPI MOUNT

5C "TRU-SET" LATHE CHUCK - 1 1/2" x 8 TPI MOUNT

  • Baton Rouge, Louisiana, United States
  • Jan 30th
5C Collet Fixture Closer. Unknown Brand. Homemade Handle Tool#1

5C Collet Fixture Closer. Unknown Brand. Homemade Handle Tool#1

  • Cornell, Illinois, United States
  • Jan 30th
Original Hardinge step OC Collet closer Chuck OC 2&#034; Dia Thread mount

Original Hardinge step OC Collet closer Chuck OC 2" Dia Thread mount

  • Baldwin Park, California, United States
  • Jan 30th
Hardinge Master Collet Chuck S20 S-20 with 5/16 pads

Hardinge Master Collet Chuck S20 S-20 with 5/16 pads

  • Baldwin Park, California, United States
  • Jan 30th
Pull Back 5C Collet Chuck A-6 (4.19 Dia.) Spindle Nose USA ATS WorkHolding

Pull Back 5C Collet Chuck A-6 (4.19 Dia.) Spindle Nose USA ATS WorkHolding

  • Baldwin Park, California, United States
  • Jan 30th
Pull Back S15 Collet Chuck A-5 (3.250 Dia.) Spindle Nose USA

Pull Back S15 Collet Chuck A-5 (3.250 Dia.) Spindle Nose USA

  • Baldwin Park, California, United States
  • Jan 30th
Pull Back 5C Collet Chuck A-6 (4.19 Dia.) Spindle Nose USA

Pull Back 5C Collet Chuck A-6 (4.19 Dia.) Spindle Nose USA

  • Baldwin Park, California, United States
  • Jan 30th
ERICKSON QUICK-CHANGE COLLET CHUCK w/3/8&#034;; 5/8&#034;; 3/4&#039; 1&#034; Collets (273)

ERICKSON QUICK-CHANGE COLLET CHUCK w/3/8"; 5/8"; 3/4' 1" Collets (273)

  • Odessa, Florida, United States
  • Jan 30th
ERICKSON QUICK-CHANGE COLLET CHUCK w/3/16&#034;; 3/8&#034;; 7/16&#034; Collets (274)

ERICKSON QUICK-CHANGE COLLET CHUCK w/3/16"; 3/8"; 7/16" Collets (274)

  • Odessa, Florida, United States
  • Jan 30th
ERICKSON QUICK-CHANGE COLLET CHUCK w/ 1/4&#034;; 3/8&#034;; 9/32&#034; Collets (275)

ERICKSON QUICK-CHANGE COLLET CHUCK w/ 1/4"; 3/8"; 9/32" Collets (275)

  • Odessa, Florida, United States
  • Jan 30th
ERICKSON QUICK-CHANGE COLLET CHUCK w/ 3/16&#034;; 3/8&#034;; 1/2&#034; Collets (276)

ERICKSON QUICK-CHANGE COLLET CHUCK w/ 3/16"; 3/8"; 1/2" Collets (276)

  • Odessa, Florida, United States
  • Jan 30th
ERICKSON QUICK-CHANGE COLLET CHUCK w/ 1/4&#039;; 3/8&#034;; 5/8&#034; Collets (279)

ERICKSON QUICK-CHANGE COLLET CHUCK w/ 1/4'; 3/8"; 5/8" Collets (279)

  • Odessa, Florida, United States
  • Jan 30th
ERICKSON QUICK-CHANGE COLLET CHUCK w/ 3/16&#034;; 9/32&#034;; 3/8&#034; Collets (280)

ERICKSON QUICK-CHANGE COLLET CHUCK w/ 3/16"; 9/32"; 3/8" Collets (280)

  • Odessa, Florida, United States
  • Jan 30th

People who viewed this item also vieved

1/8&#034; Buck #7B Collet USA

1/8" Buck #7B Collet USA

  • Lebanon, Tennessee, United States
  • Jun 8th
37/64&#034; Pfander Hone DA180 Collet, 37/64DA18

37/64" Pfander Hone DA180 Collet, 37/64DA18

  • Lebanon, Tennessee, United States
  • Jun 8th
16PCS TG75 COLLETS MOSTLY KENNAMETAL TG75 SEE SIZES BELOW GREAT COND. C12834

16PCS TG75 COLLETS MOSTLY KENNAMETAL TG75 SEE SIZES BELOW GREAT COND. C12834

  • Dayton, Ohio, United States
  • Jun 9th
New Quality BGA fixture with screws and Bottom support clamp For ACHI IR 6000

New Quality BGA fixture with screws and Bottom support clamp For ACHI IR 6000

  • SH, China
  • Jun 21st
2&#034; Tool maker grinding vice.

2" Tool maker grinding vice.

  • Statesville, North Carolina, United States
  • Jun 22nd
Craftsman 4&#034; Face Plate for Lathe 1&#034; x 8 TPI Atlas Delta Rockwell

Craftsman 4" Face Plate for Lathe 1" x 8 TPI Atlas Delta Rockwell

  • Youngstown, Ohio, United States
  • Jun 22nd
BESSEY Rite Hite Self-Positioning Hold-Down Clamp Maximum Stud Size:3/4&#039;&#039; #751

BESSEY Rite Hite Self-Positioning Hold-Down Clamp Maximum Stud Size:3/4'' #751

  • Duncan, South Carolina, United States
  • May 24th
ETM Fixed Tool Clamp System - COUNTERBORE DIAMETER: 3-7/32&#039;&#039;

ETM Fixed Tool Clamp System - COUNTERBORE DIAMETER: 3-7/32''

  • Duncan, South Carolina, United States
  • May 24th
Westward Heavy-Duty Tradesman&#039;s Vise 5&#034; Ductile Iron 3-3/8&#034; Throat Depth

Westward Heavy-Duty Tradesman's Vise 5" Ductile Iron 3-3/8" Throat Depth

  • Loves Park, Illinois, United States
  • May 24th
Bison-Bial 2-1/3&#034; 3-Jaw Self-Centering Mini Lathe Chuck w/1/2-20 Threaded Mount

Bison-Bial 2-1/3" 3-Jaw Self-Centering Mini Lathe Chuck w/1/2-20 Threaded Mount

  • Hamden, Connecticut, United States
  • May 25th
Tmx 8&#034; D1-4 3-Jaws (2-Pcs Hard Rev.) Universal Self-Centering Scroll Lathe Chuck

Tmx 8" D1-4 3-Jaws (2-Pcs Hard Rev.) Universal Self-Centering Scroll Lathe Chuck

  • Hamden, Connecticut, United States
  • May 25th
ROHM 4 3/8” 4 Jaw Plain Back Spindle Mount Manual Lathe Self Centering Chuck

ROHM 4 3/8” 4 Jaw Plain Back Spindle Mount Manual Lathe Self Centering Chuck

  • Санкт-Петербург, Russian Federation
  • May 25th
TOOLMAKERS SMALL MACHINISTS VICE pair

TOOLMAKERS SMALL MACHINISTS VICE pair

  • Hadley, Pennsylvania, United States
  • May 25th
Work Stop / Part Locater for Kurt, Haas, Bridgeport, Makino or CNC type Vises

Work Stop / Part Locater for Kurt, Haas, Bridgeport, Makino or CNC type Vises

  • Oakville, Ontario, Canada
  • May 25th
New Wilton Vise Model 1745 4.5 Inch Free Shipping

New Wilton Vise Model 1745 4.5 Inch Free Shipping

  • Winston-Salem, North Carolina, United States
  • May 25th
3MT LIVE CENTER 2 3/8 &#034; CAP

3MT LIVE CENTER 2 3/8 " CAP

  • California, United States
  • May 27th
Bison-Bial MT#4 Automatic Face Driver Live Center for Lathe

Bison-Bial MT#4 Automatic Face Driver Live Center for Lathe

  • Hamden, Connecticut, United States
  • May 27th
Bison-Bial MT#2 Live Lathe Center Set w/Interchangeable Inserts

Bison-Bial MT#2 Live Lathe Center Set w/Interchangeable Inserts

  • Hamden, Connecticut, United States
  • May 27th
Wood Table!!! Huge!!! 3x8 foot work bench. Hvy 2x6 construction

Wood Table!!! Huge!!! 3x8 foot work bench. Hvy 2x6 construction

  • Fuquay Varina, North Carolina, United States
  • Jun 3rd
HUOT Angled CNC Tool Platform (40 Taper) CT-40, BT-40 Tool Holder Rack

HUOT Angled CNC Tool Platform (40 Taper) CT-40, BT-40 Tool Holder Rack

  • Chatsworth, California, United States
  • Jun 3rd
ABS Import Cast Iron Arbor Press, 1/2-Ton Capacity

ABS Import Cast Iron Arbor Press, 1/2-Ton Capacity

  • Loveland, Colorado, United States
  • Jun 3rd
HORIZONTAL 20&#034; ROTARY TABLE - 1.75&#034; THRU HOLE, 7.5&#034; HEIGHT

HORIZONTAL 20" ROTARY TABLE - 1.75" THRU HOLE, 7.5" HEIGHT

  • Chino, California, United States
  • Jun 6th
Haas Servo Control Unit for Brush Drive Rotary Tables

Haas Servo Control Unit for Brush Drive Rotary Tables

  • Minneapolis, Minnesota, United States
  • Jun 6th
8&#034; Bison Adjustable Tailstock NEW

8" Bison Adjustable Tailstock NEW

  • Carrollton, Ohio, United States
  • Jun 6th
10” x 2” x 5.5” Vee Block

10” x 2” x 5.5” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th
8” x 6.5” x 6” Vee Block

8” x 6.5” x 6” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th
10” x 4” x 7.5” Vee Block

10” x 4” x 7.5” Vee Block

  • Euclid, Ohio, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies