+ Post new Ad
HARDINGE S-22 COLLET PADS 1- 3/8 ROUND SRE NEW, US $35.99 – Picture 0
HARDINGE S-22 COLLET PADS 1- 3/8 ROUND SRE NEW, US $35.99 – Picture 0

Hardinge S-22 Collet Pads 1- 3/8 Round Sre New

US $35.99

  • Roscoe, Illinois, United States
  • Jan 30th
Open on mobile:
QR code
Get your hands on this exceptional product by visiting my store where you can find an extensive range of items. The Hardinge S-22 collet pads available are highly recommended. These collet pads measure 1-3/8 round SRE and are brand new.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Manufacturer Hardinge

Directions

Similar products from Metalworking Collets

5 **LG (4" Wide)**KENNAMETAL TG 250 Collets 1", 1-1/4", 1-1/2", 2", 2-1/2"

5 **LG (4" Wide)**KENNAMETAL TG 250 Collets 1", 1-1/4", 1-1/2", 2", 2-1/2"

  • Burleson, Texas, United States
  • Jan 30th
ACCU PRO ER 11 1 MM COLLET MACHINIST TOOLING

ACCU PRO ER 11 1 MM COLLET MACHINIST TOOLING

  • Punta Gorda, Florida, United States
  • Jan 30th
ER 16 10MM SPRING COLLET PARLEC MACHINIST TOOLING

ER 16 10MM SPRING COLLET PARLEC MACHINIST TOOLING

  • Punta Gorda, Florida, United States
  • Jan 30th
ENCO 3/16" ROUND COLLET TOOL HOLDER NEW

ENCO 3/16" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
HARDINGE -S25-HS COLLET 3/8 ROUND SMOOTH NEW

HARDINGE -S25-HS COLLET 3/8 ROUND SMOOTH NEW

  • Roscoe, Illinois, United States
  • Jan 30th
ENCO 1" ROUND COLLET TOOL HOLDER NEW

ENCO 1" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
ENCO 7/8" ROUND COLLET TOOL HOLDER NEW

ENCO 7/8" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
ENCO 5/8" ROUND COLLET TOOL HOLDER NEW

ENCO 5/8" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
ENCO 3/8" ROUND COLLET TOOL HOLDER NEW

ENCO 3/8" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
ENCO 1/8" ROUND COLLET TOOL HOLDER NEW

ENCO 1/8" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
ENCO 15/16" ROUND COLLET TOOL HOLDER NEW

ENCO 15/16" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
ENCO 1/2" ROUND COLLET TOOL HOLDER NEW

ENCO 1/2" ROUND COLLET TOOL HOLDER NEW

  • Rockford, Illinois, United States
  • Jan 30th
1 KENROK 5C COLLET 5/16 WITH INSIDE THREADS

1 KENROK 5C COLLET 5/16 WITH INSIDE THREADS

  • Kingsville, Maryland, United States
  • Jan 30th
CENTAUR R807 Collet, R8, 7/32 In, For Milling/Drilling

CENTAUR R807 Collet, R8, 7/32 In, For Milling/Drilling

  • United States
  • Jan 30th
12 Collets & Nose Cone Hardinge Precision South Bend Logan Atlas? .625 Thread

12 Collets & Nose Cone Hardinge Precision South Bend Logan Atlas? .625 Thread

  • Elmwood Park, Illinois, United States
  • Jan 30th
SOUTH BEND & HARDINGE 5C COLLETS - USED, PLEASE SEE LISTING

SOUTH BEND & HARDINGE 5C COLLETS - USED, PLEASE SEE LISTING

  • Arlington, Vermont, United States
  • Jan 30th
R8 3/4 COLLET CHUCK

R8 3/4 COLLET CHUCK

  • United States
  • Jan 30th
3x ER16 Spring Collet 7mm

3x ER16 Spring Collet 7mm

  • Shenzhen, China
  • Jan 30th
KENNAMETAL ROMINCRON KRCSTFPR112G Boring Cartridge Loc: J 2-1-2

KENNAMETAL ROMINCRON KRCSTFPR112G Boring Cartridge Loc: J 2-1-2

  • Oregon, Ohio, United States
  • Jan 30th
2x New ER16 Spring Collet ER-16 Chuck SUJ2 HRC 45 degC Hole Diameter 4mm

2x New ER16 Spring Collet ER-16 Chuck SUJ2 HRC 45 degC Hole Diameter 4mm

  • Shenzhen, China
  • Jan 30th

People who viewed this item also vieved

HEAVY DUTY MILLING ANGLE PLATE 24" X 9" X 8"

HEAVY DUTY MILLING ANGLE PLATE 24" X 9" X 8"

  • La Puente, California, United States
  • Mar 10th
Pair of Up Thrust Clamps- Up Lift Clamps CL-MF40-5301

Pair of Up Thrust Clamps- Up Lift Clamps CL-MF40-5301

  • Boise, Idaho, United States
  • Mar 11th
C Clamps, (1) SARGENT & CO. 5" & (1) No Name 3" C Clamp, Made in USA

C Clamps, (1) SARGENT & CO. 5" & (1) No Name 3" C Clamp, Made in USA

  • Saunderstown, Rhode Island, United States
  • Mar 11th
2 VISE GRIP IRWIN WELDING PLIERS 9R LOCKING CLAMP 9" NEW

2 VISE GRIP IRWIN WELDING PLIERS 9R LOCKING CLAMP 9" NEW

  • Westerville, Ohio, United States
  • Mar 11th
MACHINIST LATHE MILL Ground & Hardened Tool Makers Hold Down Fixture Plate

MACHINIST LATHE MILL Ground & Hardened Tool Makers Hold Down Fixture Plate

  • Morris Plains, New Jersey, United States
  • Mar 11th
Angle plate 5" x 4" x 8"

Angle plate 5" x 4" x 8"

  • Montebello, California, United States
  • Mar 11th
NEW! Jacobs K4 Chuck Key for Portable Drills #3655DD Free Shipping!

NEW! Jacobs K4 Chuck Key for Portable Drills #3655DD Free Shipping!

  • Richmond, Maine, United States
  • Mar 12th
Engine Lathe 4 Jaw Chuck 15 3/4 ” OD x 3 7/8” ID A1-11” Mount

Engine Lathe 4 Jaw Chuck 15 3/4 ” OD x 3 7/8” ID A1-11” Mount

  • Lake Saint Louis, Missouri, United States
  • Mar 12th
Engine Lathe 4 Jaw Chuck 18” Dia. x 5” ID A1-15” Mount

Engine Lathe 4 Jaw Chuck 18” Dia. x 5” ID A1-15” Mount

  • Lake Saint Louis, Missouri, United States
  • Mar 12th
SPI 3/4" VISE STOP

SPI 3/4" VISE STOP

  • Berlin, Connecticut, United States
  • Mar 12th
10 pcs precision angle block set 1 to 5 degree & 5 to 30 degree

10 pcs precision angle block set 1 to 5 degree & 5 to 30 degree

  • Boston, Massachusetts, United States
  • Mar 12th
VINTAGE MACHINIST VICE

VINTAGE MACHINIST VICE

  • Middletown, Ohio, United States
  • Mar 12th
ROYAL SUPER TRI BEARING PRECISION LIVE CENTER - #3MT,HAUPPAUGE N,Y. USA

ROYAL SUPER TRI BEARING PRECISION LIVE CENTER - #3MT,HAUPPAUGE N,Y. USA

  • Los Angeles, California, United States
  • Jun 1st
Carbide Tipped MT4 Dead Center Nice Shape!

Carbide Tipped MT4 Dead Center Nice Shape!

  • Victoria, British Columbia, Canada
  • Jun 1st
SOUTH BEND ATLAS ROCKWELL 6" FACEPLATE 1-1/2"-8 9" & 10K LATHE DOUBLE DOG PLATE

SOUTH BEND ATLAS ROCKWELL 6" FACEPLATE 1-1/2"-8 9" & 10K LATHE DOUBLE DOG PLATE

  • Decatur, Illinois, United States
  • Jun 1st
K.O. LEE NO. B989 ROTATING MOUNTABLE CLAMP CUTTER RADIAL GRINDING FIXTURE B789V

K.O. LEE NO. B989 ROTATING MOUNTABLE CLAMP CUTTER RADIAL GRINDING FIXTURE B789V

  • Robertsdale, Alabama, United States
  • May 28th
MACHINIST TOOLS LATHE MILL Machinist 2 Screw Jacks for Set Up

MACHINIST TOOLS LATHE MILL Machinist 2 Screw Jacks for Set Up

  • Morris Plains, New Jersey, United States
  • May 28th
Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block With Clamp

Suburban Tool 6" x 6" x 4" Hardened Steel Precision V-Block With Clamp

  • Charlotte, North Carolina, United States
  • May 28th
Precision V-Block & Clamp Set 50x60x60mm (2 pcs) Gr.1 Prismen Winkelprisma Satz

Precision V-Block & Clamp Set 50x60x60mm (2 pcs) Gr.1 Prismen Winkelprisma Satz

  • Ukraine, Ukraine
  • Jun 1st
MACHINISTLATHE MILL Machinist Starrett Unusual V Block and Clamp in Box

MACHINISTLATHE MILL Machinist Starrett Unusual V Block and Clamp in Box

  • Morris Plains, New Jersey, United States
  • Jun 1st
New Starrett No.S384JZ Set of 4 Pair Hardened Steel Parallels Tool Maker

New Starrett No.S384JZ Set of 4 Pair Hardened Steel Parallels Tool Maker

  • Claremont, California, United States
  • Jun 1st
3" PRECISION TILTING ROTARY TABLE, Part#TTSK-75- NEW

3" PRECISION TILTING ROTARY TABLE, Part#TTSK-75- NEW

  • Madison Heights, Michigan, United States
  • Jun 1st
TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

TSUDAKOMA RZ160 INDEXER, ROTARY TABLE, WITH CONTROL TPC JR

  • Aurora, Illinois, United States
  • Jun 1st
ERON No. 308 CROSSLIDE ROTARY TABLE 8INCH DIAMETER

ERON No. 308 CROSSLIDE ROTARY TABLE 8INCH DIAMETER

  • Quebec, Quebec, Canada
  • Jun 1st
Tecnara  BT40 TG100 Collet Chuck #240-100-6

Tecnara  BT40 TG100 Collet Chuck #240-100-6

  • Bountiful, Utah, United States
  • Jun 7th
Techniks SYIC-29026 CAT/SFC Shrink Fit Chuck

Techniks SYIC-29026 CAT/SFC Shrink Fit Chuck

  • Kansas City, Missouri, United States
  • Jun 7th
LEXAIR 5C COLLET AIR OPERATED CLAMPING FIXTURE BLOCK MODEL 65101 150 PSI RATED

LEXAIR 5C COLLET AIR OPERATED CLAMPING FIXTURE BLOCK MODEL 65101 150 PSI RATED

  • Andover, Ohio, United States
  • Jun 7th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies