+ Post new Ad
Hardinge S12 5/8" Serrated Collet Pads, US $19.95 – Picture 0
Hardinge S12 5/8" Serrated Collet Pads, US $19.95 – Picture 1
Hardinge S12 5/8" Serrated Collet Pads, US $19.95 – Picture 2
Hardinge S12 5/8" Serrated Collet Pads, US $19.95 – Picture 0
Hardinge S12 5/8" Serrated Collet Pads, US $19.95 – Picture 1
Hardinge S12 5/8" Serrated Collet Pads, US $19.95 – Picture 2

Hardinge S12 5/8" Serrated Collet Pads

US $19.95

  • Richfield, Wisconsin, United States
  • May 1st
Open on mobile:
QR code
Hardinge S12 5/8" Serrated Collet Pads Collet pads are used but in good working order.  The sets include the matching A/B/C pad. We are selling our surplus collet pads, feed pads and tool holders from out Acme Gridley departmnent. We have a good selection of S style collet pads along with both steel and cast iron feed pads. We also have a lot of diffrent too holders for all positions as well. Feel free to contact us if your looking for something specific and we don't have it listed.
“Collet pads are used but in good working order. Sets include A/B/C pads.”
Manufacturer Hardinge
Brand Hardinge
Country/Region of Manufacture United States

Directions

Similar products from Metalworking Collets

Collets...Pick off for 1" New Britains (Hardinge #4039)

Collets...Pick off for 1" New Britains (Hardinge #4039)

  • Strongsville, Ohio, United States
  • May 8th
HARDINGE 5C 13/64" LATHE COLLET MADE IN USA

HARDINGE 5C 13/64" LATHE COLLET MADE IN USA

  • San Diego, California, United States
  • May 7th
KENNAMETAL PRECISION COLLET SERIES 40 ER SPR 7-6mm 40ER 7mm-6mm

KENNAMETAL PRECISION COLLET SERIES 40 ER SPR 7-6mm 40ER 7mm-6mm

  • Lubbock, Texas, United States
  • May 6th
5C stop set, collet extensions

5C stop set, collet extensions

  • West Islip, New York, United States
  • May 6th
ER32 COLLET SET TECHNIKS INCH 18 PC SET

ER32 COLLET SET TECHNIKS INCH 18 PC SET

  • Meridian, Idaho, United States
  • May 5th
NEW SURPLUS HARDINGE 5/64

NEW SURPLUS HARDINGE 5/64" x 7/16 N. ACME COLLET (.0781") 44-900094 - show original title

  • Fairfield, Iowa, United States
  • May 5th
USED UNIVERSAL ENGINEERING 11/64" DOUBLE TAPER SERIES "Y" COLLET .1719"

USED UNIVERSAL ENGINEERING 11/64" DOUBLE TAPER SERIES "Y" COLLET .1719"

  • Fairfield, Iowa, United States
  • May 4th
USED UNIVERSAL ENGINEERING 13/64" DOUBLE TAPER SERIES "Y" COLLET .2031"

USED UNIVERSAL ENGINEERING 13/64" DOUBLE TAPER SERIES "Y" COLLET .2031"

  • Fairfield, Iowa, United States
  • May 4th
Lot of 3 HARDINGE 5C Machinable PIE JAW / STEP COLLETS - 4 1/4", 5 1/4", 6 1/4"

Lot of 3 HARDINGE 5C Machinable PIE JAW / STEP COLLETS - 4 1/4", 5 1/4", 6 1/4"

  • Glendale, Arizona, United States
  • May 3rd
Round Collet R8 7/8" 875"

Round Collet R8 7/8" 875"

  • New Bedford, Massachusetts, United States
  • May 2nd
USED 5C x 27/32" COLLET 5-C x .8438"

USED 5C x 27/32" COLLET 5-C x .8438"

  • Fairfield, Iowa, United States
  • Apr 30th
USED UNIVERSAL ENGINEERING 23/64" DOUBLE TAPER SERIES "Y" COLLET .3594"

USED UNIVERSAL ENGINEERING 23/64" DOUBLE TAPER SERIES "Y" COLLET .3594"

  • Fairfield, Iowa, United States
  • Apr 29th
Hardinge 215 Square Collet 1

Hardinge 215 Square Collet 1"- show original title

  • Ottawa, Illinois, United States
  • Apr 29th
Table Clamps Of CNC Router Fixture Presser for CNC T-slot Table, Aluminum Alloy

Table Clamps Of CNC Router Fixture Presser for CNC T-slot Table, Aluminum Alloy

  • Shenzhen, China
  • Apr 28th
SHARS 3/4" to 33JT Drill Chuck Arbor Adaptor JT33

SHARS 3/4" to 33JT Drill Chuck Arbor Adaptor JT33

  • Saint Charles, Illinois, United States
  • Apr 27th
NEW ER40 CNC 1" Spring Collet

NEW ER40 CNC 1" Spring Collet

  • Alpharetta, Georgia, United States
  • Apr 27th
3x 4 Flute Ball End Mills

3x 4 Flute Ball End Mills

  • West Covina, California, United States
  • Apr 26th
Set of 9 Hardinge 5C Square Collets (1/4"-3/4")

Set of 9 Hardinge 5C Square Collets (1/4"-3/4")

  • Rochester, New York, United States
  • Apr 25th
5/8" Expanding Arbor (Mandrel) -American Made

5/8" Expanding Arbor (Mandrel) -American Made

  • Tilton, New Hampshire, United States
  • Apr 24th
Hardinge 5C Round Collet Set 35pcs 1/32" to 1-1/16" X 1/32" + 1-1/8"

Hardinge 5C Round Collet Set 35pcs 1/32" to 1-1/16" X 1/32" + 1-1/8"

  • Torrance, California, United States
  • Apr 24th

People who viewed this item also vieved

MORSE TAPER #3 DEAD CENTER (LOC878B)

MORSE TAPER #3 DEAD CENTER (LOC878B)

  • Laingsburg, Michigan, United States
  • Jan 30th
Used Bull Nose Dead Center With Morse Taper #4 P/N TP4661 Head Size 3-3/8"

Used Bull Nose Dead Center With Morse Taper #4 P/N TP4661 Head Size 3-3/8"

  • Bristol, Connecticut, United States
  • Jan 30th
Used Morse Taper Carbide Tipped Relieved Dead Center, MT 6 For Grinder or Lathe

Used Morse Taper Carbide Tipped Relieved Dead Center, MT 6 For Grinder or Lathe

  • Bristol, Connecticut, United States
  • Jan 30th
NICE! JACOBS SPINDLE NOSE SPEED LATHE CHUCK W/ L00 MOUNT + COLLET

NICE! JACOBS SPINDLE NOSE SPEED LATHE CHUCK W/ L00 MOUNT + COLLET

  • Chino, California, United States
  • Jan 30th
NICE! JACOBS SPINDLE NOSE SPEED LATHE CHUCK W/ 5MT MOUNT + COLLET

NICE! JACOBS SPINDLE NOSE SPEED LATHE CHUCK W/ 5MT MOUNT + COLLET

  • Chino, California, United States
  • Jan 30th
HARDINGE HARD JAWS FOR 5" 3-JAW CHUCK PART NO. 30A8HC

HARDINGE HARD JAWS FOR 5" 3-JAW CHUCK PART NO. 30A8HC

  • East Brunswick, New Jersey, United States
  • Jan 30th
5 Wedgelock 4.5" Cylindrical Clecos 1/2" to 1 1/2" grip .177 Cleco Fasteners

5 Wedgelock 4.5" Cylindrical Clecos 1/2" to 1 1/2" grip .177 Cleco Fasteners

  • Mineral Wells, Texas, United States
  • Jan 30th
Williams,No.6 Vulcan.,Bridge ,Boiler,heavy duty C-clamp, 3" to 6-1/2" Cap.

Williams,No.6 Vulcan.,Bridge ,Boiler,heavy duty C-clamp, 3" to 6-1/2" Cap.

  • Cocoa, Florida, United States
  • Jan 30th
heavy duty steel plate vertical lift clamp

heavy duty steel plate vertical lift clamp

  • Steinhatchee, Florida, United States
  • Jan 30th
NEW PRECISION 123 BLOCK SET W/ TAPPED HOLES

NEW PRECISION 123 BLOCK SET W/ TAPPED HOLES

  • Harvard, Massachusetts, United States
  • Jan 30th
All American Products 423-02 Lock Screw Locating Pin - Slip Fit / Made In USA

All American Products 423-02 Lock Screw Locating Pin - Slip Fit / Made In USA

  • San Diego, California, United States
  • Jan 30th
Midaco Series 30A auto Pallet Changer

Midaco Series 30A auto Pallet Changer

  • Kenosha, Wisconsin, United States
  • Jan 30th
NOS Eclipse UK 30" Premium BOLT CUTTERS - High Tensile, Forged Handles #EFBC30

NOS Eclipse UK 30" Premium BOLT CUTTERS - High Tensile, Forged Handles #EFBC30

  • Merrickville, Ontario, Canada
  • Jan 30th
NOS Eclipse UK Premium 24" BOLT CUTTERS - High Tensile, Forged Handles #EFBC24

NOS Eclipse UK Premium 24" BOLT CUTTERS - High Tensile, Forged Handles #EFBC24

  • Merrickville, Ontario, Canada
  • Jan 30th
NOS Eclipse 14" BOLT CUTTERS - High Tensile, Tubular Handles ETBC14 Reg $65

NOS Eclipse 14" BOLT CUTTERS - High Tensile, Tubular Handles ETBC14 Reg $65

  • Merrickville, Ontario, Canada
  • Jan 30th
BONDHUS BALLDRIVER SET Inch/Metric 14K GOLD PLATED

BONDHUS BALLDRIVER SET Inch/Metric 14K GOLD PLATED

  • Carrollton, Ohio, United States
  • Jan 30th
USED LW CHUCK MILLING MACHINE SWIVEL BASE FOR VISE (360°-GRADUATIONS) 8V3

USED LW CHUCK MILLING MACHINE SWIVEL BASE FOR VISE (360°-GRADUATIONS) 8V3

  • Fairfield, Iowa, United States
  • Jan 30th
Stalwart New Universal Table Mount Vice and Drill Clamp Tilts 90 Degrees

Stalwart New Universal Table Mount Vice and Drill Clamp Tilts 90 Degrees

  • Martinsburg, West Virginia, United States
  • Jan 30th
atlas lathe,south bend, logan, lathe collet rod,3AT collet

atlas lathe,south bend, logan, lathe collet rod,3AT collet

  • West Farmington, Ohio, United States
  • Feb 13th
MORI SEIKI 1-1/2" Dia Collet Chuck Spindle SL-00 SL00 CNC Lathe Turning Center

MORI SEIKI 1-1/2" Dia Collet Chuck Spindle SL-00 SL00 CNC Lathe Turning Center

  • San Diego, California, United States
  • Feb 13th
STARRETT No. 248 LONG DRIVE PIN PUNCHES machinist tools *8

STARRETT No. 248 LONG DRIVE PIN PUNCHES machinist tools *8

  • Towaco, New Jersey, United States
  • Feb 13th
Haas 5C Indexer Cnc Control Box

Haas 5C Indexer Cnc Control Box

  • Ballwin, Missouri, United States
  • Feb 13th
MACHINIST TOOL LATHE MILL Harig Grind All No 1 Grinding Fixture in Case

MACHINIST TOOL LATHE MILL Harig Grind All No 1 Grinding Fixture in Case

  • Morris Plains, New Jersey, United States
  • Feb 13th
Haas 5C Indexer with Control

Haas 5C Indexer with Control

  • Colorado Springs, Colorado, United States
  • Feb 13th
Hardened Tool maker Block work holding

Hardened Tool maker Block work holding

  • Lititz, Pennsylvania, United States
  • Feb 15th
4 assorted small blocks

4 assorted small blocks

  • North Branford, Connecticut, United States
  • Feb 15th
STARRETT VINTAGE 54C HOLD-DOWNS W/BOX USA MACHINIST TOOLMAKER OTHER USA MADE

STARRETT VINTAGE 54C HOLD-DOWNS W/BOX USA MACHINIST TOOLMAKER OTHER USA MADE

  • Woodbury, New Jersey, United States
  • Feb 15th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies