+ Post new Ad
Hardinge Super Precision DSM-59 Turret Lathe 1 Owner ORIGINAL CLEAN w/ VIDEO, US $17000 – Picture 0
Hardinge Super Precision DSM-59 Turret Lathe 1 Owner ORIGINAL CLEAN w/ VIDEO, US $17000 – Picture 0

Hardinge Super Precision Dsm-59 Turret Lathe 1 Owner Original Clean W/ Video

US $17000

  • Merritt Island, Florida, United States
  • Oct 19th
Open on mobile:
QR code
1-Owner Hardinge DSM-59 Turret Lathe, Serial # DV-59-12018 Purchased this Turrett Lathe from its original owner, who was a retired German machinist that had a 1-2 man shop making small part runs for various aerospace companys.  This was not a production environment machine, and the owner was very particular with his tools... This lathe is all original, paint, and all.  It has only ever had oil in it for cutting fluid, never any water based coolant. I would venture to say it has been in an A/C'd environment its entire life.  It has been very well maintained.   Runs as it should and needs nothing. Machine can be palletized, shrink wrapped, and brought within 60 miles of where I'm at for an additional fee of $250. Payment of $500 through paypal upon purchasing, remainder of payment by money order. Youtube Video here :  https://youtu.be/-6BRitfUgCg 

Directions

Similar products from Tools for Other Machines

1/4'' Male to 1/4'' Camera Tripod Mount Adapter For Pop Male Threaded Screw

1/4'' Male to 1/4'' Camera Tripod Mount Adapter For Pop Male Threaded Screw

  • Shanghai, China
  • Oct 20th
CAVALLIN PLATE ROLLING MILL MODEL M130 SF WITH COILERS MADE IN ITALY

CAVALLIN PLATE ROLLING MILL MODEL M130 SF WITH COILERS MADE IN ITALY

  • Saint-Laurent, Quebec, Canada
  • Oct 20th
Brookfield model PA-24 (1/4"- 1-1/2")

Brookfield model PA-24 (1/4"- 1-1/2")

  • North Vernon, Indiana, United States
  • Oct 20th
Royal Oak Form Grinder

Royal Oak Form Grinder

  • Manchester, Connecticut, United States
  • Oct 20th
Hammond Polishing & Buffing Lathe - Used - AM15804

Hammond Polishing & Buffing Lathe - Used - AM15804

  • Cleveland, Ohio, United States
  • Oct 20th
SCHMIDT Tool Steady Rest RIP 218 2.5"-18" capacity

SCHMIDT Tool Steady Rest RIP 218 2.5"-18" capacity

  • Novi, Michigan, United States
  • Oct 19th
New ISCAR TGTBU 19-35 Parting and Grooving Blade Block Tang-Grip Lathe BKU-110

New ISCAR TGTBU 19-35 Parting and Grooving Blade Block Tang-Grip Lathe BKU-110

  • Jacksonville, Florida, United States
  • Oct 19th
T-1001 GM Shift Lever Seal Remover-Installer

T-1001 GM Shift Lever Seal Remover-Installer

  • San Antonio, Texas, United States
  • Oct 19th
T-1001-PV GM Shift Lever Seal Remover-Installer(Longer Shift Shaft Seals)

T-1001-PV GM Shift Lever Seal Remover-Installer(Longer Shift Shaft Seals)

  • San Antonio, Texas, United States
  • Oct 19th
T-0160-A Univ- Exten Housing Bushing Remover-Installer -Output Shaft Holding Fix

T-0160-A Univ- Exten Housing Bushing Remover-Installer -Output Shaft Holding Fix

  • San Antonio, Texas, United States
  • Oct 19th
Antique Rare Brownell Prov. RI 11" x 18" Lathe, Motorized Steampunk Bench Model

Antique Rare Brownell Prov. RI 11" x 18" Lathe, Motorized Steampunk Bench Model

  • Pawtucket, Rhode Island, United States
  • Oct 19th
Torit Vibra Shake Cabinet Dust Collector, Model # VS-1500

Torit Vibra Shake Cabinet Dust Collector, Model # VS-1500

  • Pawtucket, Rhode Island, United States
  • Oct 19th
Osaka 6-1/2", 3-Jaw Lathe Chuck with D1-4 Cam Lock Mount, Model #6

Osaka 6-1/2", 3-Jaw Lathe Chuck with D1-4 Cam Lock Mount, Model #6

  • Pawtucket, Rhode Island, United States
  • Jun 24th
Antique Topping Tool, Gear Wheel Cutting Machine, Jeweler's Lathe - Circa 1860

Antique Topping Tool, Gear Wheel Cutting Machine, Jeweler's Lathe - Circa 1860

  • Pawtucket, Rhode Island, United States
  • Jun 24th
American Watch Tool Co / Boley Type Watchmaker's Jeweler's Lathe - PRISTINE

American Watch Tool Co / Boley Type Watchmaker's Jeweler's Lathe - PRISTINE

  • Pawtucket, Rhode Island, United States
  • Jun 24th
Automatic Indexible Number and Letter Stamp for Foot Press, Hydraulic Press

Automatic Indexible Number and Letter Stamp for Foot Press, Hydraulic Press

  • Pawtucket, Rhode Island, United States
  • Jun 24th
36” Blanchard 20D-36 Rotary Surface Grinder

36” Blanchard 20D-36 Rotary Surface Grinder

  • Watertown, Connecticut, United States
  • Jun 24th
4 Pieces LOC-LINE 41403 1/8" Round Nozzle New

4 Pieces LOC-LINE 41403 1/8" Round Nozzle New

  • Clover, South Carolina, United States
  • Jun 24th
IEMCA, VIP80-E, BAR FEED NEW: 2006

IEMCA, VIP80-E, BAR FEED NEW: 2006

  • Simi Valley, California, United States
  • Jun 24th
IEMCA, PRODIGY 547, BAR FEED NEW: 2003

IEMCA, PRODIGY 547, BAR FEED NEW: 2003

  • Simi Valley, California, United States
  • Jun 24th

People who viewed this item also vieved

TTC Production DH-5B Precision Self-Opening Geometric Style Die Head

TTC Production DH-5B Precision Self-Opening Geometric Style Die Head

  • Duncan, South Carolina, United States
  • Jan 30th
DAVENPORT / PETERSON TOOL HOLDER

DAVENPORT / PETERSON TOOL HOLDER

  • Churchville, New York, United States
  • Jan 30th
Brown & Sharpe Adjustable parrellels

Brown & Sharpe Adjustable parrellels

  • National Park, New Jersey, United States
  • Jan 30th
Recoil Thread Repair Kit 33070 UNC 7/16-14 Wire Threaded insert NEW 2 sets

Recoil Thread Repair Kit 33070 UNC 7/16-14 Wire Threaded insert NEW 2 sets

  • Waukesha, Wisconsin, United States
  • Jan 30th
115 Pcs HSS Drill Bits Set, 1/16 - 1/2'' by 64ths, #1 to 60, A to Z, #0422-0003

115 Pcs HSS Drill Bits Set, 1/16 - 1/2'' by 64ths, #1 to 60, A to Z, #0422-0003

  • TORONTO, ONTARIO, Canada
  • Jan 30th
VALENITE CAT 50 BILZ #3 COMPRESSION TENSION TAPPING CHUCK (LOC1213A) TS12

VALENITE CAT 50 BILZ #3 COMPRESSION TENSION TAPPING CHUCK (LOC1213A) TS12

  • Laingsburg, Michigan, United States
  • Jan 30th
18 Wire EDM Stainless 8mm x 20mm Screws Bolts for System 3R

18 Wire EDM Stainless 8mm x 20mm Screws Bolts for System 3R

  • Millstone Township, New Jersey, United States
  • Jan 30th
45 Wire EDM Stainless 8mm x 80MM Screws Bolts for System 3R

45 Wire EDM Stainless 8mm x 80MM Screws Bolts for System 3R

  • Millstone Township, New Jersey, United States
  • Jan 30th
System 3R Wire Edm Rulers & Setup Accessories 3Ruler

System 3R Wire Edm Rulers & Setup Accessories 3Ruler

  • Millstone Township, New Jersey, United States
  • Jan 30th
Stanley U-212 Unishear Sheet Metal Cutter

Stanley U-212 Unishear Sheet Metal Cutter

  • Brookhaven, Pennsylvania, United States
  • Jan 30th
Atlas Mandrel Press No. 1-1/2, On Stand

Atlas Mandrel Press No. 1-1/2, On Stand

  • River Grove, Illinois, United States
  • Jan 30th
LARGE SEAMING ANVIL HARDY BLACKSMITH SHEET METAL TOOL

LARGE SEAMING ANVIL HARDY BLACKSMITH SHEET METAL TOOL

  • Toms River, New Jersey, United States
  • Jan 30th
Sunnen K20-A55 Hone Stones - 5 Pieces

Sunnen K20-A55 Hone Stones - 5 Pieces

  • Garden City, Idaho, United States
  • Jan 30th
Sunnen P28-A55 Hone Stones - Set of 12

Sunnen P28-A55 Hone Stones - Set of 12

  • Garden City, Idaho, United States
  • Jan 30th
Mr Deburr (300DB) vibratory finisher

Mr Deburr (300DB) vibratory finisher

  • Salt Lake City, Utah, United States
  • Jan 30th
MAKINO/KAO MING CUTTER GRINDER TABLE CABLE

MAKINO/KAO MING CUTTER GRINDER TABLE CABLE

  • Corona, California, United States
  • Jan 30th
SPI V-Block KIT 0.0300 9/32 V Angle- 90.00 [ never used ]

SPI V-Block KIT 0.0300 9/32 V Angle- 90.00 [ never used ]

  • Fenton, Missouri, United States
  • Jan 30th
Moore Grinding Spindle Dust Boot

Moore Grinding Spindle Dust Boot

  • Batavia, Ohio, United States
  • Jan 30th
Vintage Double Steampunk Pulley

Vintage Double Steampunk Pulley

  • Columbus, Ohio, United States
  • Jan 30th
Lathe Tool Holder, Vintage Lathe Tool Holder,well use

Lathe Tool Holder, Vintage Lathe Tool Holder,well use

  • Nashua, New Hampshire, United States
  • Jan 30th
HARDINGE STYLE MOTOR REVERSING CONTACTOR SWITCHES (HC CLONE) TESTED/WORKING!

HARDINGE STYLE MOTOR REVERSING CONTACTOR SWITCHES (HC CLONE) TESTED/WORKING!

  • Santa Ana, California, United States
  • Jan 30th
Secodex R218.19-01.5-3-40 Drills Bores 1 1/2"Dia 1 1/2 Shank

Secodex R218.19-01.5-3-40 Drills Bores 1 1/2"Dia 1 1/2 Shank

  • York, Pennsylvania, United States
  • Jan 30th
1.50" Endmill

1.50" Endmill

  • Saint Clair, Michigan, United States
  • Jan 30th
VALENITE Econo Mizer Loc-A-Dex 2" Milling Cutter MRN SS-134-5R3-075S and Inserts

VALENITE Econo Mizer Loc-A-Dex 2" Milling Cutter MRN SS-134-5R3-075S and Inserts

  • Arlington, Texas, United States
  • Jan 30th
NEW ELLIS MODEL 3000 MITRE BANDSAW / BAND SAW - 13 1/2 ” Round at 90°

NEW ELLIS MODEL 3000 MITRE BANDSAW / BAND SAW - 13 1/2 ” Round at 90°

  • Grand Rapids, Michigan, United States
  • Jan 30th
WELLS HORIZONTAL BANDSAW MDL 58B 7" X 9" 115V SINGLE PHASE

WELLS HORIZONTAL BANDSAW MDL 58B 7" X 9" 115V SINGLE PHASE

  • Wadley, Alabama, United States
  • Jan 30th
DeWALT MITER-SAW STOP

DeWALT MITER-SAW STOP

  • West Point, Pennsylvania, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies