Harris Bridgit Lead-free Solder 1/8" X 1lb Spool Brgt61

US $94

Indianapolis, Indiana, United States
Jun 2nd

Open on mobile:
QR code

Netwelder Harris Bridgit Lead-free Solder 1/8" x 1lb spool BRGT61 SolidusLiquidusNSFASTMCommercial Specification 438°F 225°C729°F 387°C61ASTM B32-89 Alloy Grade HNGrade HN, B32 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/Nick.aspx#sthash.PcrK1sgA.dpuf SolidusLiquidusNSFASTMCommercial Specification 438°F 225°C729°F 387°C61ASTM B32-89 Alloy Grade HNGrade HN, B32 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/Nick.aspx#sthash.PcrK1sgA.dpuf SolidusLiquidusNSFASTMCommercial Specification 438°F 225°C729°F 387°C61ASTM B32-89 Alloy Grade HNGrade HN, B32 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/Nick.aspx#sthash.PcrK1sgA.dpuf Tin-antimony solder well suited for applications where moderately elevated temperature is a factor. With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections. Not recommended for use on brass or HVAC connections.Typical Application: Not recommended for use on brass or HVAC connections. - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/95-5.aspx#sthash.xHs6W7hZ.dpuf Tin-antimony solder well suited for applications where moderately elevated temperature is a factor. With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections. Not recommended for use on brass or HVAC connections.Typical Application: Not recommended for use on brass or HVAC connections. - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/95-5.aspx#sthash.xHs6W7hZ.dpuf Tin-antimony solder well suited for applications where moderately elevated temperature is a factor. With higher electrical conductivity and high fluidity, 95/5 is recommended for lead free installation of small diameter, tight fitting connections. Not recommended for use on brass or HVAC connections.Typical Application: Not recommended for use on brass or HVAC connections. - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/95-5.aspx#sthash.xHs6W7hZ.dpuf Lead-free solder widely used in plumbing applications where lead-bearing solders are prohibited. Contains nickel, making joints tremendously strong. Wide range makes Bridgit an excellent alloy for large diameter fittings and ill-fitted or non-concentric pipes. Fills gaps and caps off easily and effectively. CHEMICAL COMPOSITION %: Silver 0.05 – 0.15 Nickel 0.05 – 2.0 Copper 2.5 – 3.5 Antimony 4.5 – 5.5 Tin Remainder MELTING TEMPERATURE: Solidus 460°F (238°C) Liquidus 630°F (332°C) SPECIFICATION COMPLIANCE: ASTM B32 Alloy B, NSF/ANSI 61 Annex G, NSF/ANSI 372 and conforms with lead content requirements for “lead free” plumbing as defined by California, Vermont, Maryland, and Louisiana state laws, and the US Safe Drinking Water Act amendments effective January 2014. RECOMMENDED FLUX: Bridgit Burn Resistant Flux or Bridgit Water Soluble Flux (ASTM B813). A premium, multiple deoxidized, wire. Produces high quality welds in most grades of carbon steels.E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Welding/Mild-Steel/ER70S-2-GTAW-TIG.aspx#sthash.OLMoUL8J.dpuf A premium, multiple deoxidized, wire. Produces high quality welds in most grades of carbon steels.E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Welding/Mild-Steel/ER70S-2-GTAW-TIG.aspx#sthash.OLMoUL8J.dpuf A premium, multiple deoxidized, wire. Produces high quality welds in most grades of carbon steels.E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Welding/Mild-Steel/ER70S-2-GTAW-TIG.aspx#sthash.OLMoUL8J.dpuf A premium, multiple deoxidized, wire. Produces high quality welds in most grades of carbon steels.E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Welding/Mild-Steel/ER70S-2-GTAW-TIG.aspx#sthash.OLMoUL8J.dpuf A general purpose welding wire for fabrication of mild steel. Contains more deoxidizers than ER70S-3. The additional deoxidizers also provide better wetting, giving a flatter bead shape and the capabilityof faster travel speeds. Conforms to AWS A5.18 ER70S-6 - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Welding/Mild-Steel/ER70S-6-GTAW-TIG.aspx#sthash.COp0lm0y.dpuf Nick® is a lead-free plumbing solder having been specifically formulated as a replacement for the tin/lead solders. It has a wide melting range (291F-144F) that allows operators to fill small tight-fitting pipe connections and also to bridge gaps in large, loose-fitting or non-concentric pip. Its ease of application in all types of copper joints, makes it the preferred solder of experienced operators and is the most forgiving in the hands of the less experienced. Nick® is a patented alloy, which meets all U.S. Federal requirements for lead-free solders mandated by the Federal Safe Drinking Water Act Amendments of 1986. (Public Law 99-339). - See more at: http://www.harrisproductsgroup.com/en/Products/Alloys/Soldering/Lead-Free-Solders/Nick.aspx#sthash.PcrK1sgA.dpuf We expect payment within 3 days. We suggest Priority Mail for lighter weight items under 4lbs and UPS for heavier items when shipping in the Unites States. WE USUALLY SHIP THE NEXT BUSINESS DAY AFTER PAYMENT RECEIVED, SAME DAY IN SOME CASES. UPS SENDS TRACKING INFORMATION TO YOUR E-MAIL ADDRESS USED FOR SALE. TRUCK TRACKING INFO SENT IN SEPARATE E-MAIL. All items are covered by Manufacturer warranties. We will help you with any warranty issues. Small items shipped by UPS ground or USPS Priority Mail, unless you choose 1st or 2nd day air at additional charge. Larger welders are shipped via common carrier of our choice. We get it to your door. Additional charges for lift gates or special delivery are at your cost. We strive to always have stock available for shipping, but from time to time stock-outs may occur. Some welders are not stock items and will be ordered from manufacturer when paid for. It usually takes only a few days to ship to you. Some are shipped direct from manufacturer. PLEASE CALL BEFORE RETURNING ANY ITEM. EXCHANGES AND RETURNS SUBJECT TO 20% RE-STOCK PLUS OUTBOUND SHIPPING CHARGES AND RETURN SHIPPING CHARGES. ALL PRODUCTS COVERED BY MFG. WARRANTIES. INTERNATIONAL BUYERS: ONLY ITEMS MARKED FOR SALE FOR INTERNATIONAL SALES WILL BE SOLD INTERNATIONALLY. WARRANTIES MAY NOT BE HONORED IN ALL COUNTRIES. BUYER SOLELY RESPONSIBLE FOR ALL IMPORT FEES AND DUTIES. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. PAYPAL USERS SUBJECT TO EXCHANGE FEE. Paypal is preferred payment method. BUYER SOLELY RESPONSIBLE FOR ALL IMPORT FEES AND DUTIES. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA. PAYPAL USERS SUBJECT TO EXCHANGE FEE. Credit Card: Call 800-284-6992, 8:00AM-4:00PM EST M-F to use all major credit cards. ALL PAYMENTS IN US DOLLARS, ON CREDIT CARD OR INSTITUTION DOING BUSINESS IN USA.