+ Post new Ad
Heater Bands, PPE #C-28060 1300W 240/480V, Qty of 2, US $13000 – Picture 0
Heater Bands, PPE #C-28060 1300W 240/480V, Qty of 2, US $13000 – Picture 0

Heater Bands, Ppe #c-28060 1300w 240/480v, Qty Of 2

US $13000

  • Nashua, New Hampshire, United States
  • May 30th
Open on mobile:
QR code
This is for a set of 2 heater bands from PPE, # C-28060. They are able to be wired 240 or 480 Volts (wiring diagram included). 1300 Watts each. The long screws allow for greater adjustment and the inside diameter is 5 inches with the screws fully tightened.One heater was missing the long screws and SHCS have been installed instead (they are shorter) These are new and have been on a shelf.

Directions

Similar products from IBM Processing

Heatron MN11PX1A 240V 2000W 9618 Cartridge Heater 3/4" x 12" Conduit (12779)

Heatron MN11PX1A 240V 2000W 9618 Cartridge Heater 3/4" x 12" Conduit (12779)

  • Melrose Park, Illinois, United States
  • May 30th
Big Chief 151933 240V 500W Cartridge Heater 1/2" x 6-1/2" Conduit (12780)

Big Chief 151933 240V 500W Cartridge Heater 1/2" x 6-1/2" Conduit (12780)

  • Melrose Park, Illinois, United States
  • May 30th
OGDEN MWMN3200008 220V 1600W Cartridge Heater 20MM x 320MM (12781)

OGDEN MWMN3200008 220V 1600W Cartridge Heater 20MM x 320MM (12781)

  • Melrose Park, Illinois, United States
  • May 30th
Power filter Schaffner type FN 258-100-35, Ferromatik Elektra spare parts

Power filter Schaffner type FN 258-100-35, Ferromatik Elektra spare parts

  • Pegnitz, Germany
  • May 30th
Vickers motor module DBM-03 Vickers DBM-L2A, type CG160603, Ferromatik Elektra

Vickers motor module DBM-03 Vickers DBM-L2A, type CG160603, Ferromatik Elektra

  • Pegnitz, Germany
  • May 30th
Vickers motor module DBM-03 Vickers DBM-PS, type CG200503, Ferromatik spare part

Vickers motor module DBM-03 Vickers DBM-PS, type CG200503, Ferromatik spare part

  • Pegnitz, Germany
  • May 30th
1999 385 Ton JSW Model J385EII-SPB

1999 385 Ton JSW Model J385EII-SPB

  • WI, United States
  • May 30th
2004 310Ton 28.4oz Goldstar LGH280D Injection Molding Machine-IMM # 7761631

2004 310Ton 28.4oz Goldstar LGH280D Injection Molding Machine-IMM # 7761631

  • Phoenix, Arizona, United States
  • May 30th
Netstal SPV 110.240.9451 9451a Komplett System Card / Board

Netstal SPV 110.240.9451 9451a Komplett System Card / Board

  • Ventura, California, United States
  • May 30th
Smargon 20 L. PET Reheat Stretch Blow Molding Machine

Smargon 20 L. PET Reheat Stretch Blow Molding Machine

  • Miami, Florida, United States
  • May 30th
2003 SIG Corpoplast Blomax 20 CAV. PET Re-Heat Stretch Blow Molding Machine

2003 SIG Corpoplast Blomax 20 CAV. PET Re-Heat Stretch Blow Molding Machine

  • Miami, Fl, United States
  • May 30th
1994 NISSEI 289-TON PLASTIC INJECTION MOLDING MACHINE

1994 NISSEI 289-TON PLASTIC INJECTION MOLDING MACHINE

  • Charlotte, North Carolina, United States
  • May 30th
(NEW) 30 Ton vertical injection machine Rotary table 2 or 4 stations

(NEW) 30 Ton vertical injection machine Rotary table 2 or 4 stations

  • Miami, Fl, United States
  • May 30th
ALUMINUM STERLING HOPPER

ALUMINUM STERLING HOPPER

  • Gardena, California, United States
  • May 30th
2 Cavity RSB-2000 PET Heatset Blow Molding Machine. Runs Great!

2 Cavity RSB-2000 PET Heatset Blow Molding Machine. Runs Great!

  • Plano, Texas, United States
  • May 29th
Single Cavity RSB-1000 PET Heatset Blow Molding Machine. Runs Great!

Single Cavity RSB-1000 PET Heatset Blow Molding Machine. Runs Great!

  • Plano, Texas, United States
  • May 29th
2 NEW 440493 HEATERS & THERMOCOUPLE DROP NOZZLE

2 NEW 440493 HEATERS & THERMOCOUPLE DROP NOZZLE

  • NC, United States
  • May 29th
2006 700 Ton 221 oz Negri Bossi Injection Molding Machine-IMM # 7763116

2006 700 Ton 221 oz Negri Bossi Injection Molding Machine-IMM # 7763116

  • Lazaro Cardenas, Juarez, Mexico
  • May 29th
1996 55 Ton 2.7 oz Toyo TI-55H Injection Molding Machine-IMM # 7761542

1996 55 Ton 2.7 oz Toyo TI-55H Injection Molding Machine-IMM # 7761542

  • Anaheim, California, United States
  • May 29th
1994 300 Ton 26.6 oz Nissei FS260S100ASE Injection Molding Machine-IMM # 7763110

1994 300 Ton 26.6 oz Nissei FS260S100ASE Injection Molding Machine-IMM # 7763110

  • Phoenix, Arizona, United States
  • May 29th

People who viewed this item also vieved

Full Greg Wade Reloaded Extruder 3D Printer JHead 1.75 3mm RepRap Printed Nema17

Full Greg Wade Reloaded Extruder 3D Printer JHead 1.75 3mm RepRap Printed Nema17

  • Kranj, default, Slovenia
  • Feb 22nd
VELLEMAN PLA175U1 1.75 mm (1/16")PLA FILAMENT-BLUE -1 kg /2.2 lb

VELLEMAN PLA175U1 1.75 mm (1/16")PLA FILAMENT-BLUE -1 kg /2.2 lb

  • Torrance, California, United States
  • Feb 22nd
VELLEMAN PLA175V1 1.75 mm(1/16")PLA FILAMENT-PEA GREEN -1 kg /2.2 lb

VELLEMAN PLA175V1 1.75 mm(1/16")PLA FILAMENT-PEA GREEN -1 kg /2.2 lb

  • Torrance, California, United States
  • Feb 22nd
VELLEMAN PLA175Y1 1.75 mm(1/16")PLA FILAMENT-YELLOW -1 kg /2.2 lb

VELLEMAN PLA175Y1 1.75 mm(1/16")PLA FILAMENT-YELLOW -1 kg /2.2 lb

  • Torrance, California, United States
  • Feb 22nd
Custom Vacuum Former, 24" X 12"

Custom Vacuum Former, 24" X 12"

  • Suffern, New York, United States
  • Feb 22nd

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies