HEPA-CARE® HC800F Air Purification System, US $2,995.00 – Picture 0

HEPA-CARE® HC800F Air Purification System, US $2,995.00 – Picture 1

HEPA-CARE® HC800F Air Purification System, US $2,995.00 – Picture 2

HEPA-CARE® HC800F Air Purification System, US $2,995.00 – Picture 3

HEPA-CARE® HC800F Air Purification System, US $2,995.00 – Picture 4

HEPA-CARE® HC800F Air Purification System, US $2,995.00 – Picture 5

HEPA-CARE® HC800F Air Purification System, US $2,995.00 – Picture 6

Hepa-care® Hc800f Air Purification System

US $2,995.00

Berlicum NB, Netherlands
Jan 30th

Open on mobile:
QR code

NEVER USED BRAND NEW Portable In-Room Infectious Patient Isolation System Quickly Converts any Patient Room into a Negative Pressure Isolation Room The high-tech HEPA-CARE HC800F Air Purification System from Abatement Technologies® can be used to convert a patient room into a CDC-compliant negative pressure isolation room. The HC800F floor model is equipped with a Type A HEPA filter tested and certified to capture at least 99.99% of microscopic particles 0.3 microns in size. High-performance motorized blowers produce peak rated airflow of 750-900 cfm, and can typically maintain 12 or more air changes per hour (ACH) in areas as large as 3,500-4,000 ft3. The upright, slender-profile design with easy-rolling, swivel casters facilitate use of the HC800F in tight spaces. When not in use for negative pressure patient isolation, the versatile HC800F can function as a recirculating HEPA air cleaner, reducing airborne pathogen counts in high risk areas such as ER waiting rooms and treatment areas. Air laden with deadly, infectious airborne pathogens is pulled through two filter stages: A 2" particulate pre-filter treated with microbial growth inhibitor (standard) A pharmaceutical-grade HEPA filter with silicone-gel seal and anodized aluminum frame Remove Odors and Gases With a VAPOR-LOCK® Carbon Filter Optional VAPOR-LOCK carbon or carbon blend filters are available for the HC800F, to remove airborne gas phase contaminants and odors from the air. These filters are used in place of the standard particulate pre-filter. Learn more about eliminating odors, vapors and VOCs from the air using VAPOR-LOCK high-capacity activated carbon and carbon blend filters Clean and Sterilize the Air with Germicidal UV Disinfection For an extra layer of protection, the optional UV800F germicidal UV (UVGI) disinfection module from Abatement Technologies provides the very latest in high-performance UVGI technology. The UV800F, which attaches to the HC800F exhaust grill, irradiates and destroys airborne bacteria, viruses, fungi and other airborne pathogens. Learn more about the UV800F UVGI Air Disinfection Module for the HC800F. With thousands of units in service, the state-of-the-art HC800F creates an unmatched record of reliable performance operating 24/7/365 with features that include: Portability - Narrow, upright design with two smooth-rolling fixed casters and two swivel casters with foot brakes make it easy to deploy Powerful Airflow- Dual energy-efficient motorized impellers rated for 100,000 hours of maintenance-free operation Unique Zero-Bypass Dual Cabinet Design- Added assurance that contaminated air can't bypass the HEPA filter Aircraft-Type Powder-Coated Aluminum Cabinet- .050" powder coated aircraft aluminum alloy creates a professional-looking "hospital" appearance and is easy to decontaminate and maintain Safety Certification- Certified as a Class II Medical Devices under FDA 510K and NRTL certified to conform with relevant UL and CSA safety standards User-Friendly Controls- Microprocessor-based, password protected, touch pad controls Export Version - A 230 volt/50-60 Hz model is available for overseas customers Specs: Airflow* - Five airflow settings: 300-900 cfm Air Changes Per Hour - 12+ ACH @ 3,500-4,000 ft.3 Net Weight with Filters - 81 pounds Shipping Weight - 100 pounds Dimensions (W x D x H) - 20.5" W x 20"D x 50.5"H Power Supply Requirements- 120 volts AC, 60Hz, 15 amps Energy Efficient - Operates at 125 watts or less Electrical Safety - Certified as Class II Medical Devices under FDA 510K, and certified by Intertek Testing Services, an OSHA-accredited Nationally Recognized Testing Laboratory (NRTL), to comply with relevant UL and CSA safety standards Electronic Controls- Microprocessor-based, touch pad style with high-visibility color LCD, five preset airflow settings and secure password protection Cabinet Material - Durable .050" aircraft aluminum powder-coated white for ease of cleaning & disinfection Built-in Casters- Four easy-rolling casters with foot brakes Easy to Replace Filters - Hinged filter access door with flip latches & hex lock for secure access Filters :Pre-filter - 2" particulate pre-filter treated with an EPA-registered microbial growth inhibitor to protect against filter degradation (MERV 8) Optional pre-filter - VAPOR-LOCK® carbon pre-filter removes low concentrations of gases and odors Pharmaceutical-grade HEPA Filter - Individually tested and certified in accordance with Institute of Environmental Sciences and Technology IEST-RP-CC001.3 to provide minimum filtration efficiency of 99.99% against a 0.3 micron challenge aerosol. High-quality, anodized aluminum frame does not support microbial growth; secure silicone gel seal to protect against contaminated air bypass Hospital-Grade Plug- 10' white power cord with three prong plug Two Exhaust-Air Outlets - Top and rear air outlet grills with optional 8" slide-in exhaust collar. One solid exhaust cover plate included * Note: Use airflow ratings and air changes per hour (ACH) as a guideline only. Estimates are based on factory and independent testing @ 120 VAC with an air straightener and a traverse of readings taken with a computing vane-anemometer. Actual results may vary. Quiet Operation Quiet background operation of the HC800F (52 dBA to 59 dBA @ 5') provides undisturbed air purification 24/7 within patient rooms. (HC800F shown in negative pressure mode exhausting HEPA-filtered air directly outdoors through the rear outlet grill and window.) View all versatile modes of operation and exhaust options. Long-Life HEPA Filter with Strong Aluminum Frame Each pharmaceutical-grade HEPA filter from Abatement Technologies is individually tested and certified in accordance with Institute of Environmental Sciences and Technology IEST-RP-CC001.3 to provide minimum filtration efficiency of 99.99% against a 0.3 micron challenge aerosol. The high-performance HEPA filter is mounted within a strong anodized aluminum frame that will not warp or support microbial growth. Silicon-Gel Seal Protects Against Contaminated Air Bypass A downward facing flange imbeds into a silicon-gel seal creating a channel that forces air through the HEPA filter and protects against the risk of contaminated air bypassing the filter. Hinged Door for Rapid Filter Replacement Hinged, front door with flip latches and hex lock for security provides quick access to both the HEPA filter and the 2" particulate pre-filter for replacement or maintenance. Two Exhaust-Air Outlets Filtered exhaust air passes out of the HC800F through the top 8" and/or rear exhaust grill. Optional 8" slide-in locking clamp shown connecting duct to the optional top grill outlet (H3235-08). One solid exhaust cover plate is included with the unit to cover the grill not being used. Electronic Touch Pad Controls High-visibility, color LCD touch pad make the HC800F easy to use and control. Microprocessor-based electronics provide secure password protection and many user-friendly features including: Digital 4 x 20 LCD readout with backlit, alphanumeric color display Password protection Five airflow settings Menu-driven display for monitoring various operating parameters Increased reliability Green 'Unit On' LED that illuminates when the unit is powered Red 'Change Pre-Filter' LED that illuminates when the pre-filter is loaded Red 'Change HEPA Filter' LED that illuminates when the HEPA is loaded Backlit alpha-numeric display for status indication, setup and operating modes Modular design for ease of service

Condition:	New other (see details): A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections. ...	Brand	hepa care
Country of Manufacture	United States
Model	HC 800F