Hewlett Packard Agilent Hp 3314a Programmable Function Signal Generator 20 Mhz

US $3400

  • Anaheim, California, United States
  • May 26th
  What You'll get: Hewlett Packard Agilent HP 3314A Programmable Function Signal Generator 20 MHz Power Cord, Cables, and other Accessories Not Included Other Accessories that are Not pictured or mentioned under "What You'll Get" are  Not  included Please visit our eBay Store for more similar items ! Testing: When unit is switched on, there is a light humming and the fan comes on but the display does not power on. Due to our limited resources we are unable to test further. Sold AS-Is for parts or repair! Cosmetics: Pictures are of the actual unit. Light scratches and scuffs from typical use, but very clean overall. Please reference pictures for cosmetics. Taken from the Internet:  The 3314A is a Function/Waveform Generator with the precision and versatility to produce numerous waveforms.  Its feature set includes accurate sine, square, and triangle waves, with ramps and pulses available using variable symmetry.  Additional features include counted bursts, gate, lin/log sweeps, AM, FM/VCO, dc offset, and phase lock.  For increased versatility, the Arbitrary waveform mode allows a countless number of user defined waveforms.  Since complete programmability is provided, all of these capabilities are available for ATE systems, as well as bench applications. Precise Functions The 3314A provides sine, square and triangle waveforms from 0.001 Hz to 19.99 MHz with an amplitude range of 0.01 mV to 10 Vp-p into 50 O, with optional 30 Vp-p into > 500 O. Continuous waveforms are provided with high accuracy and low distortion, with frequency accuracy on the upper ranges of 0.01% and sine disortion < -55 dBc to 50 kHz. Pulses and ramps are provided to 2 MHz using the variable symmetry control over the full 5% to 95% symmetry range.  This provides narrow pulses with 9 ns rise/fall times for digital circuit testing, and positive or negative ramps for amplifier testing and process control.   Independent dc offset to ± 5V (into 50 O) can be added to any ac signal.  A post-attenuator summing technique is used providing large ac signals with small offsets and vice versa. Burst and Gate The 3314A's N Cycle burst mode generates an integer number of complete cycles at each trigger.  Bursts of 1 to 1999 cycles are possible for use in applications ranging from sonar testing to digital circuits.  Variable symmetry and start/stop phase can be used to produce single ramps and haverwaves. Like burst mode, gate mode can be triggered internally or externally.  In gate, the 3314A output consists of complete cycles, pulses or Arbs which start when the trigger is true, and stop after the trigger goes false.  In gate and burst modes, the full frequency range applies for sine, square, triangle, pulse, and ramp waveforms. New 1/2 Cycle and "Integer" Phase Lock Modes The new 1/2 Cycle burst mode allows simulation of specialized signals found in electronics.  At each trigger, alternating 1/2 cycles of sines or triangles are produced.  With the addition of variable start/stop phase and symmetry, pulses with variable rise/fall time and overshoot can be produced.  Repetition rate, 1/2 cycle frequency, symmetry, and phase can be set independently to produce a variety of waveforms. The Fin X Fin modes provide powerful phase locking capability.  With "integer" phase lock, fractions or multiples of the reference signal can be provided, and ± 200 deg of phase offset is available.  Since the 3314A phase locks to the plus or minus edge of the trigger signal, it can lock to a variety of signals such as sines, squares, pulses, ramps, and others - with complete control of output function, symmetry, N, phase, amplitude and offset. Modulation and Sweep Complete AM, FM/VCO modulation give the 3314A versatile signal modifying capabilities.  With 100 kHz bandwidths, AM and FM/VCO can be used separately or simultaneously to produce a multitude of waveforms. Multi-frequency measurements can be made with the 3314A's sweep capabilities.  Linear, logarithmic, and manual sweep make measurements of filters, amplifiers, and other networks convenient and accurate.  X drive, marker, and trigger output signals are also provided. Arbitrary Waveforms For specialized low frequency applications, the 3314A's Arbitrary (ARB) waveform mode lets you create custom waveforms as a series of voltage ramps or vectors.  Values are easy to enter from the front panel using the modify knob as a "pencil" and an oscilloscope as a "pad".  For remote programming, use a desktop or mainframe computer to calculate the values, then program them using the HP-IB.  Arb waveforms are automatically stored in non-volatile memory for quick recall. Two Sources in One A square wave trigger source is included for generation of complex waveforms with a single 3314A.  The 0.5 mHz to 500 kHz internal trigger is useful in gated, burst, and phase locked waveforms.  This signal is provided as an output for synchronizing the 3314A to other devices. Source for Your System Because all front panel controls are programmable, the 3314A's precision and versatility can be utilized in automatic test systems. System efficiency can be improved with standard features such as Service Request (SRQ) interrupt capability and buffered transfer mode. In production test environments, the 3314A's Query commands can be used when an operator and computer are sharing control of the instrumentation.  Parameters can be read from the 3314A into the computer where its computational capabilities can be utilized. Arbs Made Easy With complete control of each vector, the modify knob is used as a "pencil" to draw the waveform on an oscilloscope. After -20 unit vectors have been inserted, use modify to set the marker, VMKR, to #1.  Then set the height of #1 to 400. Press V LEN and use modify to set the length to 3. Press V HGT twice, and set the height of #2 to -190. Continue to use V HGT and V LEN to create the desired waveform, and INS (insert) or DEL (delete) vectors as needed.  Amplitude and frequency can now be set without affecting the vector values.  Waveform parameters are automatically stored in non-volatile memory while they are being created. Later, if a slightly different waveform is needed, just use the marker to select an individual vector, and modify its height and length without affecting the height and length of the other vectors.               Policies & Definitions: Shipping Most items ship out within 1-2 BUSINESS days after the payment clears. We allow local pick up. Handling fee of $9.99 and CA tax will apply. We combine shipping to save you money if the items can be combined and shipped safely. We offer a combined shipping discount of $3 for each additional item purchased. Free shipping offers do NOT apply to Puerto Rico, Alaska, Hawaii and international transactions Definitions: GUARANTEED WORKING MEANS : The item is guaranteed working as long as we receive it back within 14 days from the purchase date. We will replace the item at no additional cost if the item is DOA. If replacement is Not available, we will refund the purchase price. Please bid accordingly AS-IS MEANS:  The item is sold AS-IS Where is. This means that the buyer acknowledges that the item may or may Not be working and that the item may or may Not be complete and the buyer is willing to accept the risk. Please bid accordingly     Shipping and handling cost is Not refundable under any circumstances and the buyer is responsible for any additional shipping cost. please bid accordingly. Return Policy Every item we sell is carefully inspected before it is shipped and is tested to the best of our ability. If merchandise is Not as described please keep all packing materials, brochures, paperwork, etc. and contact us immediately after your package arrives for a return authorization claim number or to file a claim with the carrier on your behalf. * All claims MUST be made within 3 days of receipt of order *Shipping charges will not be refunded * Non-defective returned items are subject to a 30% restocking fee.   Ebay's Required Disclosure for Medical Equipment: "The sale of Some medical equipment may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies.  If the item is subject to FDA regulation, I might verify your status as an authorized purchaser of this item before shipping of the item."  The shipping weight for this item is approximately 21 LB - 17842 - 17842 -D24R - Lister: Max    Powered by SixBit's eCommerce Solution

Directions

Similar products from Sweep Generation Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies