+ Post new Ad
HHIP 3 X 1-3/4 X 2-3/8 INCH CAST Iron V Block Set 3402-1001, US $36.34 – Picture 0
HHIP 3 X 1-3/4 X 2-3/8 INCH CAST Iron V Block Set 3402-1001, US $36.34 – Picture 0

Hhip 3 X 1-3/4 X 2-3/8 Inch Cast Iron V Block Set 3402-1001

US $36.34

  • Phoenix, AZ, United States
  • Jul 26th
Open on mobile:
QR code
HHIP 3 X 1-3/4 X 2-3/8 INCH CAST Iron V Block Set (3402-1001) Width of the V is 1-3/4. Depth is 1-5/16. Made of high quality casting, properly seasoned against distortion. Machined square and parallel to meet standard specifications. | Supplied in a matched pair. W.T. (lbs.) 3 3 X 1-3/4 X 2-3/8" Cast Iron V Block Set (3402-1001) ~ Made of high quality casting, properly seasoned against distortion. ~ Machined square and parallel to meet standard specifications. ~ Supplied in a matched pair. ~ A is 3". ~ B is 1-3/4". ~ C is 2-3/8". ~ D is 1-5/16". Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Size 3 x 2-3/8 x 1-5/16 " Size, 1-3/4 " V Width
Model Does not apply
MPN Does not apply
Brand HHIP
UPC 769053012575
ISBN 0769053012575
EAN Does not apply

Directions

Similar products from Supporting Blocks & Sets

VINTAGE STARRETT No. 568 MACHINIST'S SET-UP "V" BLOCK, 3/8-16 NC w/CLAMP. PAIR

VINTAGE STARRETT No. 568 MACHINIST'S SET-UP "V" BLOCK, 3/8-16 NC w/CLAMP. PAIR

  • Egg Harbor Township, New Jersey, United States
  • Jul 27th
PAIR OF MAGNETIC TRANSFER PARALLEL BLOCKS 2.875in X 2.875in X .875in

PAIR OF MAGNETIC TRANSFER PARALLEL BLOCKS 2.875in X 2.875in X .875in

  • Grand Rapids, Michigan, United States
  • Jul 27th
Multiple large Angle Blocks

Multiple large Angle Blocks

  • Milpitas, California, United States
  • Jul 27th
Small Machinist Tool V-Block 1 x 2 3/8

Small Machinist Tool V-Block 1 x 2 3/8

  • Chicago, Illinois, United States
  • Jul 27th
PRECISION V-BLOCK SET 40 x 32 x 32 WITH 2 BLOCKS & 2 CLAMPS

PRECISION V-BLOCK SET 40 x 32 x 32 WITH 2 BLOCKS & 2 CLAMPS

  • ROHINI, SECTOR 7, India
  • Jul 27th
Global CNC Industries 1-1/2" Max Cut Okuma ID Tool Block.A118-8435 : 1-1

Global CNC Industries 1-1/2" Max Cut Okuma ID Tool Block.A118-8435 : 1-1

  • Venice, Florida, United States
  • Jul 27th
V BLOCK MACHINIST TOOL AND DIE MAKERS TOOL

V BLOCK MACHINIST TOOL AND DIE MAKERS TOOL

  • Greenfield, Tennessee, United States
  • Jul 27th
Machinist Block

Machinist Block

  • Paris, Ohio, United States
  • Jul 26th
General One Set No.116 Cast Iron V blocks And 1 Clamp Vintage Machinist Tool

General One Set No.116 Cast Iron V blocks And 1 Clamp Vintage Machinist Tool

  • La Puente, California, United States
  • Jul 26th
MT 2 Taper Turning Attachment Lathe Tail Stoke Best Precision Hardened Ground

MT 2 Taper Turning Attachment Lathe Tail Stoke Best Precision Hardened Ground

  • DELHI, DELHI, India
  • Jul 26th
Global CNC Haas ID Tool Block 3/4" Max Cut HSL10-8420

Global CNC Haas ID Tool Block 3/4" Max Cut HSL10-8420

  • Venice, Florida, United States
  • Jul 26th
TOOL AND DIE BLOCK RISER MACHINIST TOOL

TOOL AND DIE BLOCK RISER MACHINIST TOOL

  • Greenfield, Tennessee, United States
  • Jul 26th
machinist/toolmaker triangle metal block pair

machinist/toolmaker triangle metal block pair

  • Greenfield, Tennessee, United States
  • Jul 26th
Tool Steel V-Block Pair 25.4-1-1/2" Cap. 90° 2-3/4" x 2-1/2" x 1-3/4" 06493035

Tool Steel V-Block Pair 25.4-1-1/2" Cap. 90° 2-3/4" x 2-1/2" x 1-3/4" 06493035

  • Venice, Florida, United States
  • Jul 26th
Earth-Chain Spring Loaded Induction Block, 8mm screw - EEPM-SP

Earth-Chain Spring Loaded Induction Block, 8mm screw - EEPM-SP

  • Garden Grove, California, United States
  • Jul 25th
SUPER VEE BLOCK SET MADE IN THE USA

SUPER VEE BLOCK SET MADE IN THE USA

  • Racine, Wisconsin, United States
  • Jul 25th
Pair of Starrett No. 268 V-blocks with Clamps

Pair of Starrett No. 268 V-blocks with Clamps

  • Boaz, Alabama, United States
  • Jul 25th
PAIR OF ZIP 4-SIDED CAST IRON MULTI STEP BLOCKS 3" TALL

PAIR OF ZIP 4-SIDED CAST IRON MULTI STEP BLOCKS 3" TALL

  • Ellington, New York, United States
  • Jul 25th
Abn Machinist Thin Parallel Bars 20-Piece Tool Set 1/8In X 6In – Straightedge

Abn Machinist Thin Parallel Bars 20-Piece Tool Set 1/8In X 6In – Straightedge

  • Multiple Locations, United States
  • Jul 25th
VINTAGE LS STARRETT 567 TOOLMAKERS V BLOCK, With Clamp

VINTAGE LS STARRETT 567 TOOLMAKERS V BLOCK, With Clamp

  • Munster, Indiana, United States
  • Jul 25th

People who viewed this item also vieved

Machinists 12/6 Buy Now USA 5 x .25 Circular Mill Cutter---see all !!!

Machinists 12/6 Buy Now USA 5 x .25 Circular Mill Cutter---see all !!!

  • Lutz, Florida, United States
  • Jan 30th
Machinists 12/6 Buy Now Brand New USA Nu thread Metric thread files NEW USA

Machinists 12/6 Buy Now Brand New USA Nu thread Metric thread files NEW USA

  • Lutz, Florida, United States
  • Jan 30th
Machinists 12/6 Buy Now USA MTY4 Dead Center --Professionally repointed

Machinists 12/6 Buy Now USA MTY4 Dead Center --Professionally repointed

  • Lutz, Florida, United States
  • Jan 30th
10 Pairs of Yelok 6"x 2 "x 1.00" Aluminum Vise Jaws 6061T6

10 Pairs of Yelok 6"x 2 "x 1.00" Aluminum Vise Jaws 6061T6

  • Cupertino, California, United States
  • Jan 30th
21" CUSHMAN 3-JAW POWER WRENCH LATHE CHUCK 6-1/4" HOLE A11 BACK

21" CUSHMAN 3-JAW POWER WRENCH LATHE CHUCK 6-1/4" HOLE A11 BACK

  • Cleveland, Ohio, United States
  • Jan 30th
KITAGAWA B-208 3 JAW POWER CHUCK 8" HYDRAULIC CHUCK A2-6 MOUNTING PLATE B208

KITAGAWA B-208 3 JAW POWER CHUCK 8" HYDRAULIC CHUCK A2-6 MOUNTING PLATE B208

  • Avon, Indiana, United States
  • Jan 30th
2 Machine Handles, Clamping Locking Levers

2 Machine Handles, Clamping Locking Levers

  • North Salem, New York, United States
  • Jan 30th
ARMSTRONG #4 C-CLAMP EXTRA HEAVY DUTY USA MADE, LOW PRICED!

ARMSTRONG #4 C-CLAMP EXTRA HEAVY DUTY USA MADE, LOW PRICED!

  • Aliquippa, Pennsylvania, United States
  • Jan 30th
Genuine Crosby 5/8" Cable Wire Rope U Clamp Clamping tool 9/16 bolt threads

Genuine Crosby 5/8" Cable Wire Rope U Clamp Clamping tool 9/16 bolt threads

  • Porter Ranch, California, United States
  • Jan 30th
Hainbuch Power Chuck Spanntop

Hainbuch Power Chuck Spanntop

  • Buffalo, New York, United States
  • Jan 30th
9 SMITH TOOL 832-728L/ND ER-20 COLLET CHUCKS, 28mm SHANK

9 SMITH TOOL 832-728L/ND ER-20 COLLET CHUCKS, 28mm SHANK

  • Euclid, Ohio, United States
  • Jan 30th
LOT OF 12 HSS ACURA FLEX COLLETS SIZES 5/16" TO 1"

LOT OF 12 HSS ACURA FLEX COLLETS SIZES 5/16" TO 1"

  • Ellington, New York, United States
  • Jan 30th
11 Pcs. Techniks FT-132 #8 to 5/8" + 1/8" NPT ER Floating CNC Tap Collet Set

11 Pcs. Techniks FT-132 #8 to 5/8" + 1/8" NPT ER Floating CNC Tap Collet Set

  • Hamden, Connecticut, United States
  • Jan 30th
5 Pcs. Techniks DNA32 Ultra-Accurate .0002" TIR Collets

5 Pcs. Techniks DNA32 Ultra-Accurate .0002" TIR Collets

  • Hamden, Connecticut, United States
  • Jan 30th
15 Pc Techniks ER 32 #8-13/16"+1/8,1/4 NPT Quick-Change Rigid CNC Tap Collet Set

15 Pc Techniks ER 32 #8-13/16"+1/8,1/4 NPT Quick-Change Rigid CNC Tap Collet Set

  • Hamden, Connecticut, United States
  • Jan 30th
[NEW] SUBURBAN TOOL PRECISION GROUND ANGLE PLATE #PAW080808G 8" x 8" x 8"

[NEW] SUBURBAN TOOL PRECISION GROUND ANGLE PLATE #PAW080808G 8" x 8" x 8"

  • Santa Clara, California, United States
  • Jan 30th
Lexair 5c collet fixture block 65201

Lexair 5c collet fixture block 65201

  • North Kingstown, Rhode Island, United States
  • Jan 30th
Mahr Precision V Block Sine Bar Angle 90 Layout machinist Plate Fixture 300mm

Mahr Precision V Block Sine Bar Angle 90 Layout machinist Plate Fixture 300mm

  • Grand Rapids, Michigan, United States
  • Jan 30th
MIKEMASTER MS81-D1 6" DIAL DEPTH GAGE MASTER MICROMETER CALIBRATION STAND

MIKEMASTER MS81-D1 6" DIAL DEPTH GAGE MASTER MICROMETER CALIBRATION STAND

  • Roanoke, Virginia, United States
  • Jan 30th
SMW Hydraulic Rotary Indexer Table, # RT315HY, Maier 12" Chuck, Used, WARRANTY

SMW Hydraulic Rotary Indexer Table, # RT315HY, Maier 12" Chuck, Used, WARRANTY

  • Grand Rapids, Michigan, United States
  • Jan 30th
(4) New 4" 50lb Strength Strong Welding Magnetic Arrow Holder Magnets Magnet

(4) New 4" 50lb Strength Strong Welding Magnetic Arrow Holder Magnets Magnet

  • Aurora, Nebraska, United States
  • Jan 30th
Weiss TC-700-T Rotary Indexing Table - Speed C

Weiss TC-700-T Rotary Indexing Table - Speed C

  • San Jose, California, United States
  • Jan 30th
Bertram Engineering 9" precision tilting table

Bertram Engineering 9" precision tilting table

  • Hyde Park, Massachusetts, United States
  • Jan 30th
Yuasa 550-008 10" Super Accu-dex Indexer with 8" Chuck, & Div. plates

Yuasa 550-008 10" Super Accu-dex Indexer with 8" Chuck, & Div. plates

  • Lawndale, California, United States
  • Jan 30th
6" Wide Jaws CARDINAL DRILL PRESS Speed Vise or Mill machine Quick fast acting

6" Wide Jaws CARDINAL DRILL PRESS Speed Vise or Mill machine Quick fast acting

  • Grand Rapids, Michigan, United States
  • Jan 30th
MACHINIST 2-1/2" JAW PRECISION QUICK SLIDE QUICK GRIP VISE

MACHINIST 2-1/2" JAW PRECISION QUICK SLIDE QUICK GRIP VISE

  • Ellington, New York, United States
  • Jan 30th
MACHINIST PRECISION QUICK SLIDE QUICK GRIP SINE VISE

MACHINIST PRECISION QUICK SLIDE QUICK GRIP SINE VISE

  • Ellington, New York, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies