+ Post new Ad
HHIP 3901-5038 ER-40 Collet Chuck 132 mm Diameter x 42 mm Height, US $158.13 – Picture 0
HHIP 3901-5038 ER-40 Collet Chuck 132 mm Diameter x 42 mm Height, US $158.13 – Picture 0

Hhip 3901-5038 Er-40 Collet Chuck 132 Mm Diameter X 42 Mm Height

US $158.13

  • Miami, FL, United States
  • Jul 12th
Open on mobile:
QR code
HHIP 3901-5038 ER-40 Collet Chuck, 132 mm Diameter x 42 mm Height Mount to your choice of back plate to use on a lathe Can also be used as a fixture on a milling table Concentricity is . 0016". Diameter is 132mm Length is 42mm Supplied with a wrench. 132MM Diameter ER-40 Collet Chuck ~ Mount to your choice of backplate to use on a lathe. ~ Can also be used as a fixture on a milling table. ~ Concentricity is . 0016". ~ D1 is 132mm. ~ D is 100mm. ~ L is 42mm. Shipping We offer FREE shipping on all orders! We ship within Three business days of payment, usually sooner. We use a selection of shipping services such as UPS, FedEx, USPS etc. We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time. Return You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt. Payment We accept payment by any of the following methods: PayPal Please pay as soon as possible, as that will allow us to post your item to you sooner! Feedback Customer satisfaction is very important to us. If you have any problem with your order, please contact us and we will do our best to make you satisfied. Contact Us If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays. Please visit our eBay store to check out other items for sale! Thank you for shopping at our store.
Condition:
New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...
Size 132mm Dia
Model Does not apply
MPN Does not apply
Brand HHIP
UPC 769053088884
ISBN 0769053088884
EAN Does not apply

Directions

Similar products from Collet Chucks & Sets

Techniks CAT40 Retention Knob Coolant 21007-15C Pull Stud 15 Degrees 10 Pcs

Techniks CAT40 Retention Knob Coolant 21007-15C Pull Stud 15 Degrees 10 Pcs

  • Columbus, Ohio, United States
  • Jul 13th
Techniks CAT40 Retention Knob 21007-15 Solid Pull Stud 15 Degrees 10 Pcs

Techniks CAT40 Retention Knob 21007-15 Solid Pull Stud 15 Degrees 10 Pcs

  • Columbus, Ohio, United States
  • Jul 13th
HHIP 3901-5042 125MM Diameter D1-4 ER-40 Collet Chuck

HHIP 3901-5042 125MM Diameter D1-4 ER-40 Collet Chuck

  • Miami, FL, United States
  • Jul 12th
SOUTH BEND LATHE CBC-100NR Adjustable Collet Bushing Chuck Armature Repair Tool

SOUTH BEND LATHE CBC-100NR Adjustable Collet Bushing Chuck Armature Repair Tool

  • Yorktown, Virginia, United States
  • Jul 12th
Liboqiao Chuck Collet Tool Holder 40000RPM+ - ISO20-ER20-35MS

Liboqiao Chuck Collet Tool Holder 40000RPM+ - ISO20-ER20-35MS

  • Chillicothe, Missouri, United States
  • Jul 12th
SETTRU Collet Chuck w/ Fiine Adjustment 2-In 7-862-0505

SETTRU Collet Chuck w/ Fiine Adjustment 2-In 7-862-0505

  • Chillicothe, Missouri, United States
  • Jul 12th
HARDINGE 2” OC STEP CHUCK CLOSER ~ Not Threaded

HARDINGE 2” OC STEP CHUCK CLOSER ~ Not Threaded

  • Milford, Connecticut, United States
  • Jul 12th
HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT

HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT

  • Milford, Connecticut, United States
  • Jul 12th
HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT Older Model

HARDINGE 2” STEP CHUCK CLOSER w/ 2-3/16"-10 THREADED MOUNT Older Model

  • Milford, Connecticut, United States
  • Jul 12th
HARDINGE 3” STEP CHUCK CLOSER without Threads

HARDINGE 3” STEP CHUCK CLOSER without Threads

  • Milford, Connecticut, United States
  • Jul 12th
HHIP 3901-5041

HHIP 3901-5041

  • Miami, FL, United States
  • Jul 12th
KEILEOHO ER 32 Bloque de pinza cuadrada soporte de bloque de mandril de resor...

KEILEOHO ER 32 Bloque de pinza cuadrada soporte de bloque de mandril de resor...

  • Phoenix, AZ, United States
  • Jul 12th
Collet Chuck For CNC Lathe Milling HRC52-56 High Quality High Strength

Collet Chuck For CNC Lathe Milling HRC52-56 High Quality High Strength

  • suzhou, China
  • Jul 12th
CAT40 DA180 LOT 19 Chucks 63 Collets Collis DA180 180DA HAAS Retention Knobs

CAT40 DA180 LOT 19 Chucks 63 Collets Collis DA180 180DA HAAS Retention Knobs

  • Danbury, Connecticut, United States
  • Jul 12th
Brand New - Parlec Part# 75PG-0218 9/32" 75 TG/PG Single Angle Collet Chuck

Brand New - Parlec Part# 75PG-0218 9/32" 75 TG/PG Single Angle Collet Chuck

  • Houston, Texas, United States
  • Jul 12th
ER11-2mm SUPER PRECISION COLLET CNC MILLING LATHE TOOL AND SPINDLE MOTOR

ER11-2mm SUPER PRECISION COLLET CNC MILLING LATHE TOOL AND SPINDLE MOTOR

  • Shanghai, China
  • Jul 12th
MicroCentric CB65-ND Dead Length Collet Chuck with Sleeves

MicroCentric CB65-ND Dead Length Collet Chuck with Sleeves

  • Nashville, Indiana, United States
  • Jul 12th
ATS WORKHOLDING ATS 16C PULLBACK COLLET CHUCK K1660B D01 A6-16C & 9 Collets

ATS WORKHOLDING ATS 16C PULLBACK COLLET CHUCK K1660B D01 A6-16C & 9 Collets

  • Nashville, Indiana, United States
  • Jul 12th
5c collet chuck From Kalamazoo Industries. Hardened steel

5c collet chuck From Kalamazoo Industries. Hardened steel

  • Battle Creek, Michigan, United States
  • Jul 12th
2X(9Pcs/Set Conversion Chuck Cnc Router Bit Tool Milling Cutter Adapter Collet

2X(9Pcs/Set Conversion Chuck Cnc Router Bit Tool Milling Cutter Adapter Collet

  • Pennsylvania, United States
  • Jul 11th

People who viewed this item also vieved

Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

Vintage Toolmaker Machinist Set-up Block 1 x 2 x 3

  • Buffalo Grove, Illinois, United States
  • Jan 30th
Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

Starrett 651A1Z Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

  • Richmond Hill, New York, United States
  • Jan 30th
Starrett 651B5 Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

Starrett 651B5 Dial Indicator W/O Deep Hole Attachment, 0.375" Stem Dia., Back

  • Richmond Hill, New York, United States
  • Jan 30th
FPG CM4 Live Center MT4

FPG CM4 Live Center MT4

  • Spring Valley, California, United States
  • Jan 30th
3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

3/4" Machinist Lathe Tool:Lathe Dog -Atlas/Craftsman/South Bend

  • Ossian, Indiana, United States
  • Jan 30th
2, OLDER LIVE BEARINGS CENTERS FOR WOOD METAL LATHE

2, OLDER LIVE BEARINGS CENTERS FOR WOOD METAL LATHE

  • Waterford, Michigan, United States
  • Jan 30th
Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

Gibraltar - Manual Lathe Chucks - Type: Self-Centering Nominal - Size: 10"

  • Ogden, Utah, United States
  • Jan 30th
8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

8" HOWA / HITACHI SEIKI HA6-8-46 CNC HYDRAULIC POWER LATHE CHUCK A2-6 MOUNT

  • Cleveland, Ohio, United States
  • Jan 30th
ER 32 Collet Chuck Smith Tool 1-1/16" Dia Acme Threaded Shank (my-ID-1B2)

ER 32 Collet Chuck Smith Tool 1-1/16" Dia Acme Threaded Shank (my-ID-1B2)

  • Hendersonville, Tennessee, United States
  • Jan 30th
34 Pc Used Step Block & Fixturing Clamp Set, 7/16"-13 T-Bolt Hold Down Kit

34 Pc Used Step Block & Fixturing Clamp Set, 7/16"-13 T-Bolt Hold Down Kit

  • New Haven, Michigan, United States
  • Jan 30th
DE-STA-CO 5310, 90 degree Horizontal Toggle Clamp

DE-STA-CO 5310, 90 degree Horizontal Toggle Clamp

  • Chillicothe, Missouri, United States
  • Jan 30th
Royal USA Deburring Tool Zip Multi / Burr Set 22022

Royal USA Deburring Tool Zip Multi / Burr Set 22022

  • Columbus, Ohio, United States
  • Jan 30th
Hardinge 9/32 4NS Collet

Hardinge 9/32 4NS Collet

  • Bowling Green, Kentucky, United States
  • Jan 30th
TMS Smith Tool 51-008 Tap Adapter Collet 1/2 Inch Taps with 3/8" Shank

TMS Smith Tool 51-008 Tap Adapter Collet 1/2 Inch Taps with 3/8" Shank

  • Blue Springs, Missouri, United States
  • Jan 30th
HARDINGE STYLE 3H COLLET 9/16" DIAMETER - USED - GOOD CONDITION

HARDINGE STYLE 3H COLLET 9/16" DIAMETER - USED - GOOD CONDITION

  • Isanti, Minnesota, United States
  • Jan 30th
Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

Jones & Lamson comparator stage fixture & 2 pcs. V-blocks

  • Addison, Illinois, United States
  • Jan 30th
Mead Fluid Dynamics - Air Powered cross slide 3" Travel - Jig or Fixture

Mead Fluid Dynamics - Air Powered cross slide 3" Travel - Jig or Fixture

  • Milton Freewater, Oregon, United States
  • Jan 30th
WELDED ANGLE / FIXTURE PLATE 13 X 14 X 18 X 1" PLATE USED

WELDED ANGLE / FIXTURE PLATE 13 X 14 X 18 X 1" PLATE USED

  • Piqua, Ohio, United States
  • Jan 30th
Atlas # 9-88 MT # 2 Dead Center / OO 201

Atlas # 9-88 MT # 2 Dead Center / OO 201

  • Seffner, Florida, United States
  • Jan 30th
Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

Atlas # 9-101-64A Change Gear -64 Tooth / OO 194

  • Seffner, Florida, United States
  • Jan 30th
Atlas/Craftsman # 9-101-64A Change Gear - 64 Tooth / OO 193

Atlas/Craftsman # 9-101-64A Change Gear - 64 Tooth / OO 193

  • Seffner, Florida, United States
  • Jan 30th
HAAS T5C2 Dual Spindle

HAAS T5C2 Dual Spindle

  • Chatsworth, California, United States
  • Jan 30th
Adjustable Tailstock For 4-6 Inch Rotary Tables

Adjustable Tailstock For 4-6 Inch Rotary Tables

  • Chino, California, United States
  • Jan 30th
Heavy Duty Tailstock adjustable for Rotary table Dividing head

Heavy Duty Tailstock adjustable for Rotary table Dividing head

  • Houston, Texas, United States
  • Jan 30th
Pipe Vise, Vintage Littletown Hardware & Foundry Co. #52 Pipe Vise Made in USA

Pipe Vise, Vintage Littletown Hardware & Foundry Co. #52 Pipe Vise Made in USA

  • Saunderstown, Rhode Island, United States
  • Jan 30th
ridgid pipe clamp no 2

ridgid pipe clamp no 2

  • Churchill, Ontario, Canada
  • Jan 30th
4" TOOL MAKERS VISE

4" TOOL MAKERS VISE

  • Wadley, Alabama, United States
  • Jan 30th

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies