Hi-accuracy 0.1% Handheld Lcr Meter Lcrzdq ? Esr Tester 100khz Usb 822c

US $259.00

Shenzhen, China
Jun 9th

Open on mobile:
QR code

Note: we'll ship this item via Express mail service & ePacket to USA, Canada, Australia, New Zealand, Ireland, Austria, Belgium, Denmark, Germany, France, Finland, Luxemburg, Italy, Spain, Malta, Norway, Sweden, Swiss, UK, Japan, Korea, Thailand, Indonesia, Malaysia, Philippine, Singapore. Clients from other countries pls contact with us in advance to confirm the different shipping charges before you bid. Features: ? Basic measurement accuracy: 0.1% ? Test signal frequency up to 100kHz ? Measurement speed up to 10meas/sec ? Large character display with bright white backlight ? Ultra-low power consumption, battery-powered for 24 hours of continuous used ? Automatic identification function (Ai) ? Constant output impedance: 100 Ohm ? Percentage display and 4-tolerance comparator: 1%, 5%,10% and 20% ? Automatic Open/Short correction detection ? Data hold, Max/Min/Average recording ? Utility function configuration and current setup recovery after power-off ? Standard Mini-Usb interface, SCPI compatible Accessories: 7.2V NI-MH rechargeable battery, AC adapter, Short-circuit plate, 4-terminal Kelvin test leads, SMD 4-terminla Kelvin test Tweezers, PDF manual. Specifications: Function Measurement Parameters Primary Parameters: L / C / R / Z Second Parameters: D / Q / ? / ESR Equivalent Circuits Serial, Parallel Auto LCR Function Manual/Auto Ranging Mode Auto Test Terminals 2-terminal, 4-terminal,5-terminal Measurement Speed 10meas/sec(Fast), 5meas/sec(Medium), 2meas/sec(Slow) Correction Short, Open Tolerance Mode 1%, 5%, 10%, 20% Input protection fuse 0.1A / 250V Interface Mini-USB(virtual serial port) Test Signal Signal Frequency 100Hz, 120Hz, 1kHz, 10kHz, 100kHz Test Signal Level 0.6Vrms Output Impedance 100 ? Display Display LCD primary-secondary dual display Backlight Battery supply: when backlight is on, luminance is reduced by half 15s later and automatically turned off 30s later Powered by adapter: backlight is on until manually turned off Readings Max. counts of primary parameter: 40,000; D / Q / ? Min. resolution of Secondary parameter:0.0001 Basic Accuracy 0.1% Measurement Display Range L 0.001uH --- 1000.0 H C 0.001pF --- 20.000mF R/Z 0.0001W --- 10.000MW ESR 0.0000W -- 999.9W, resolution: 0.0001W D 0.0000 -- 9.999, resolution: 0.0001 Q 0.0000 – 9999, resolution: 0.0001 ? -179.9° -- 179.9°, resolution: 0.01° Power Supply Battery Model 7.2V Ni-MH 600mAH rechargeable battery AC Adapter Input: 220V(1±10%), 50Hz(1±5%);Output: 9V DC Operating Current Max.: 28 mA, Typical: 25mA (1kHz ,100? load) Standby(Power off) Current Max.: 2uA Battery Life 24 hours (Typical), based on backlight off and new fully charged Ni-MH battery Charge Time and Current Continuous charge time: Max. 80min Charging current: Max. 150mA Auto Power Off 5min, 15min, 30min, 60min, OFF available Battery Capacity indicate Real-time display on LCD General Operation Condition Temperature 0°C -- 40°C Relative Humidity

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	822C
Country/Region of Manufacture	China
MPN	822C
Brand	generic
Country of Manufacture	China
UPC	Does not apply