High Quality 1 Gigohm High Voltage Metering Adaptor 1% For Your (any) Dvm

US $89.00

  • Oak Ridge, Tennessee, United States
  • Jan 30th
 GEOelectronics built. Convert YOUR DVM to an ultra high impedance High Voltage Meter. This allows the ACCURATE measurement and setting of the delicate High Voltage control on your Geiger Counter, Scaler, MCA or SCA. This version will work with any DVM or a 200 milliVolt digital panel meter. It must first be calibrated against the meter being used. Internal adjustments adapt this device to several configurations which should work with any DVM of at leat 1 MegOhms input impedance, is some case even lower. Or send your meter to me and I will set it up.  If you have a high aulity DVM that is known to have exactly 10 MegOhms input, please see my other ad for an adaptor that does not need any calibration. A 1 GigOhm meter will not load down the HV on your Geiger Counter, any other meter short of an electrostatic meter will load it down considerably, precluding proper setting and perhaps causing damage to the Geiger Counter or Probe. Geiger Counter connection is via a quality Amphenol BNC connector, output to YOUR DVM is via pin jacks. Other styles of input and  output connectors are available. See our other ads for more instrumentation pertaining to Radiation Detector Calibration. Designed/built/tested by GEoelectronics (K0FF)

Directions

Similar products from Radiation Sensors & Geiger Counter

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies