+ Post new Ad
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 0
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 1
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 2
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 3
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 4
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 5
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 0
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 1
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 2
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 3
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 4
HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015, US $70.00 – Picture 5

Hilti #1 Or 1" Inch X 20-6/8" Long Y Taper Shank/reamer/drill # 4287015

US $70.00

  • Lincolnton, North Carolina, United States
  • Jan 30th
Open on mobile:
QR code
 HILTI #1 or 1" Inch x 20-6/8" Long Y Taper Shank/Reamer/Drill # 4287015 FREE SHIPPING This is a new item but has a couple small surface rust spots on it. I can steel wool it per your request. I no additional info. on this item but what you see in the pictures. Look at pictures & email any questions. Thank you 110114TBL2BINA
Condition New other (see details) :
A new, unused item with absolutely no signs of wear. The item may be missing the original packaging, or in the original packaging but not sealed. The item may be a factory second or a new, unused item with defects. See the seller’s listing for full details and description of any imperfections.
Seller Notes “A few minor surface rust spots, easily buffed out.”

Directions

Similar products from Drill Bits with Tapered Shanks

"C-L" 7/8" Twist Drill Bit 5-3/4" Overall

"C-L" 7/8" Twist Drill Bit 5-3/4" Overall

  • Coventry, Rhode Island, United States
  • Jan 30th
VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS

VINTAGE RARE BARSON HAMMER DRIFT FOR MORSE TAPER DRILLS

  • default, KLAIPEDA, Lithuania
  • Jan 30th
National 1-39/64" Drill Bit 5MT Made in usa 17 inches long

National 1-39/64" Drill Bit 5MT Made in usa 17 inches long

  • Batavia, Ohio, United States
  • Jan 30th
LIGHTLY USED NT TOOL AUTO-SHANK #1MT ADJUSTABLE DRILL SOCKET ADAPTER (D16-1)

LIGHTLY USED NT TOOL AUTO-SHANK #1MT ADJUSTABLE DRILL SOCKET ADAPTER (D16-1)

  • Fairfield, Iowa, United States
  • Jan 30th
Taper Shank Extra Long Drill Bit, 1 25/64", #4MT, HSS

Taper Shank Extra Long Drill Bit, 1 25/64", #4MT, HSS

  • Chillicothe, Missouri, United States
  • Jan 30th
Taper Shank Extra Long Drill Bit, 1 1/4", #4MT, HSS

Taper Shank Extra Long Drill Bit, 1 1/4", #4MT, HSS

  • Chillicothe, Missouri, United States
  • Jan 30th
Taper Shank Extra Long Drill Bit, 1 1/8", #4MT, HSS

Taper Shank Extra Long Drill Bit, 1 1/8", #4MT, HSS

  • Chillicothe, Missouri, United States
  • Jan 30th
Michigan Drill, 297-15/16", 3MT, HSS, Extra Length, Oil Hole Drill Bit

Michigan Drill, 297-15/16", 3MT, HSS, Extra Length, Oil Hole Drill Bit

  • Chillicothe, Missouri, United States
  • Jan 30th
Kobelco 1 47/64" #4 Morse Taper Drill Bit HSS USED

Kobelco 1 47/64" #4 Morse Taper Drill Bit HSS USED

  • Chillicothe, Missouri, United States
  • Jan 30th
Michigan Drill 522 49/64", #2MT, 4 Flute, HSS, Taper Shank Core Drill

Michigan Drill 522 49/64", #2MT, 4 Flute, HSS, Taper Shank Core Drill

  • Chillicothe, Missouri, United States
  • Jan 30th
CLEVELAND HS Chipbreaker Drills 940C 11/16" Inch Taper Shank 403923 FREE SHIPPIN

CLEVELAND HS Chipbreaker Drills 940C 11/16" Inch Taper Shank 403923 FREE SHIPPIN

  • Lincolnton, North Carolina, United States
  • Jan 30th
National 1-25/32 inch drill mt 5

National 1-25/32 inch drill mt 5

  • Cleveland, Ohio, United States
  • Jan 30th
GENERAL PURPOSE METALWORKING DRILL BIT INSIDE OF 2 SLEEVE REDUCERS 3/8"

GENERAL PURPOSE METALWORKING DRILL BIT INSIDE OF 2 SLEEVE REDUCERS 3/8"

  • New Paris, Indiana, United States
  • Jan 30th
LOT OF 2 GENERAL PURPOSE METALWORKING DRILL BITS

LOT OF 2 GENERAL PURPOSE METALWORKING DRILL BITS

  • New Paris, Indiana, United States
  • Jan 30th
Chamfering, Counterboring, and Countersinking Drill Bit 5/8"

Chamfering, Counterboring, and Countersinking Drill Bit 5/8"

  • New Paris, Indiana, United States
  • Jan 30th
LOT OF 2 GENERAL PURPOSE METALWORKING DRILL BITS 49/64", 11/16"

LOT OF 2 GENERAL PURPOSE METALWORKING DRILL BITS 49/64", 11/16"

  • New Paris, Indiana, United States
  • Jan 30th
LOT OF 3 1/2" REDUCED SHANK x 5/8" dia. DRILL REDUCED-SHANK DRILL BITS

LOT OF 3 1/2" REDUCED SHANK x 5/8" dia. DRILL REDUCED-SHANK DRILL BITS

  • New Paris, Indiana, United States
  • Jan 30th
LOT OF 8 ASSORTED LENGTH 21/32" GENERAL PURPOSE METALWORKING DRILL BITS

LOT OF 8 ASSORTED LENGTH 21/32" GENERAL PURPOSE METALWORKING DRILL BITS

  • New Paris, Indiana, United States
  • Jan 30th
21/32 TAPER-SHANK METALWORKING DRILL BIT

21/32 TAPER-SHANK METALWORKING DRILL BIT

  • New Paris, Indiana, United States
  • Jan 30th
LOT OF 4 ASSORTED SIZE GENERAL PURPOSE METALWORKING DRILL BITS

LOT OF 4 ASSORTED SIZE GENERAL PURPOSE METALWORKING DRILL BITS

  • New Paris, Indiana, United States
  • Jan 30th

People who viewed this item also vieved

7/16" COBALT TAPER LENGTH DRILL, 4-5/8" LOF, 7-1/4" OAL, PTD M51CO (PACK OF 6)

7/16" COBALT TAPER LENGTH DRILL, 4-5/8" LOF, 7-1/4" OAL, PTD M51CO (PACK OF 6)

  • Glendale, Arizona, United States
  • May 27th
1" COBALT TAPER LENGTH DRILL, 6-3/8" LOF, 11" OAL, PTD M51CO

1" COBALT TAPER LENGTH DRILL, 6-3/8" LOF, 11" OAL, PTD M51CO

  • Glendale, Arizona, United States
  • May 27th
37/64" COBALT TAPER LENGTH DRILL, 4-7/8" LOF, 8-3/4" OAL, PTD M51CO, 51337

37/64" COBALT TAPER LENGTH DRILL, 4-7/8" LOF, 8-3/4" OAL, PTD M51CO, 51337

  • Glendale, Arizona, United States
  • May 27th
2 U.S.A. 1/2" SOLID CARBIDE, BALL MILL, 2 FLUTE, CENTER CUT, {369}

2 U.S.A. 1/2" SOLID CARBIDE, BALL MILL, 2 FLUTE, CENTER CUT, {369}

  • Cleveland, Ohio, United States
  • May 27th
*** SALE *** 20 NEW PRINTED CIRCUIT BOARD DRILLS 0.40mm

*** SALE *** 20 NEW PRINTED CIRCUIT BOARD DRILLS 0.40mm

  • Georgetown, Texas, United States
  • May 28th
Bran New HYPRO CARB Carbide drills 14.0 mm dia.(0.5511")

Bran New HYPRO CARB Carbide drills 14.0 mm dia.(0.5511")

  • Charlotte, North Carolina, United States
  • May 28th
GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT .7580"

GEN3SYS REPLACEABLE CARBIDE SPADE DRILL INSERT .7580"

  • Cadiz, Kentucky, United States
  • May 31st
ACME Drill Insert 22mm dia #1 T-A HSS TiN coated 2pc per package new

ACME Drill Insert 22mm dia #1 T-A HSS TiN coated 2pc per package new

  • Joplin, Missouri, United States
  • May 31st
ACME Drill Insert 1.1406" dia #2 T-A S. Cobalt TiN coated 2pc per package new

ACME Drill Insert 1.1406" dia #2 T-A S. Cobalt TiN coated 2pc per package new

  • Joplin, Missouri, United States
  • May 31st
KOMET INDEXABLE COOLANT FED INSERT DRILL NEW .955/2.865 MADE IN USA W/WRENCH

KOMET INDEXABLE COOLANT FED INSERT DRILL NEW .955/2.865 MADE IN USA W/WRENCH

  • Lebanon, Pennsylvania, United States
  • May 31st
Mitsubishi Indexable Boring Drill TAGM2250 HH7948

Mitsubishi Indexable Boring Drill TAGM2250 HH7948

  • Grand Rapids, Michigan, United States
  • May 31st
New YG1- DH404063 6.3x31x70

New YG1- DH404063 6.3x31x70

  • Rock Hill, South Carolina, United States
  • May 31st
1 1/2" Diameter Stub length Drill, Screw Machine Drill or CNC Drill , KEW&S

1 1/2" Diameter Stub length Drill, Screw Machine Drill or CNC Drill , KEW&S

  • Sherrill, New York, United States
  • Jun 1st
(6) USA MADE HOWARD & GOULD 9/32 STUB (SCREW MACHINE) DRILLS

(6) USA MADE HOWARD & GOULD 9/32 STUB (SCREW MACHINE) DRILLS

  • Leland, Illinois, United States
  • Jun 1st
New - 20.0 mm Nachi Drill .......with 25.0 mm Shank

New - 20.0 mm Nachi Drill .......with 25.0 mm Shank

  • Cincinnati, Ohio, United States
  • Jun 1st
Size: 5 (.2055") Carbide Tipped Jobber Length Drill

Size: 5 (.2055") Carbide Tipped Jobber Length Drill

  • South Hackensack, New Jersey, United States
  • Jun 1st
Size: 4 (.2090") Carbide Tipped Jobber Length Drill

Size: 4 (.2090") Carbide Tipped Jobber Length Drill

  • South Hackensack, New Jersey, United States
  • Jun 1st
Size: 3 (.2130") Carbide Tipped Jobber Length Drill

Size: 3 (.2130") Carbide Tipped Jobber Length Drill

  • South Hackensack, New Jersey, United States
  • Jun 1st

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies