Hisonic Dual 300 Watt Pa Public Address System + Stands + Wireless Microphones

US $540

  • Montclair, California, United States
  • Jan 30th
HISONIC DUAL 300 WATT PA PUBLIC ADDRESS SYSTEM + TRIPODS + WIRELESS MICROPHONES Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description : DUAL HISONIC HS6541 600 WATT PA SYSTEM w/ HS596B WIRELESS MICROPHONE SYSTEM  + 2 x BONUS HEADSET MICROPHONES + 2 x TRIPOD / STANDS 2 x EXTENSION POWER CABLES + 12' 1/4" to 1/4" AUDIO CABLE + 100' INTERCONNECTING AUDIO CABLE BRAND NEW - 1 YEAR WARRANTY This powerful DUAL 300 watt HISONIC HS6541 Amplified PA Speaker combination is your complete sound solution for audiences of up to 1200 listeners. 600 total PEAK watts of crystal clear audio ensures that your voices are heard. The sound can easily be heard up to 200+ feet straight ahead. Ideal for presentations in auditoriums, churches, theaters, studios, boardrooms, bingo and schools. The HS6541 is very sturdy and the dual system is simple to set up. HS6541 amplified speaker includes a 10" woofer and a compression horn tweeter and can be mounted on a tripod for better audio dispersion. An extended audio cable is included to connect the two HS6541 amplified speakers to each other. Power supply extension cables are included to connect the speakers to the AC power source when they are situated on the tripods. An extended audio cable is included to connect the wireless microphone receiver to either one of the amplified HS6541 speakers. HISONIC HS6541 Amplified PA Speaker Features: 300 Watts Peak / 150 Watts RMS Power each Speaker Microphone Volume, Line In Volume Bass and Treble Controls 1/4" / XLR Mic Input RCA jack L/R / XLR input 1/4" / XLR Line Out which is used to connect to a second HS6541 unit or for recording the output. We supply a 100 foot XLR to XLR cable to connect the two HS6541 systems to each other. Each HS6541 is compact, weighs approximately 35 pounds and its dimensions are approximately 25" x 15.5" x 13.5. The speakers have a built in wheels and a pull up handle that makes it easy to take them from place to place. HISONIC  HS596B VHF DUAL WIRELESS MICROPHONES SYSTEM The HS596B wireless system comes with 2 beltpack transmitters, 2 lapel microphones, 2 handheld microphones 2 headset microphones and a deluxe 2 channel receiver with an AC power adapter. This is an excellent quality system that operates in the high VHF frequency spectrum away from the typical FM frequency area that lesser units use and without interference from radio stations. This system is designed to allow one or two persons to simultaneously use the microphones and the 2 channel receiver as the receiver has individual volume controls for each channel on the front panel. Built in LEDs identify the signal present, audio level and power on conditions. The beltpack transmitters are each powered by a nine-volt battery (2 included). There is an easy to adjust microphone sensitivity (volume) control on the belt pack transmitter as well as an on/off switch. The 2 channel receiver plugs into any PA system, MIXER, KARAOKE system with a 1/4" MIC input jack with the included cable. The potential distance of the transmission from the wireless microphones to the wireless receiver is around 150+ feet. One or two wireless microphone combinations can be used at one time. Two combinations at a time maximum. Either two of the included handheld microphones (which are great for singing or speaking) or two of the lapel or head microphones with the beltpack transmitters or one handheld microphone and one lapel / head microphone can be used at the same time. The lapel and head microphones are the deluxe type that screw into the belt pack transmitters so they can't be pulled out accidentally. Lesser systems just plug into the MIC jack and can easily be accidentally disconnected. SPECIFICATIONS FOR THE HS596B WIRELESS MICROPHONE SYSTEM:  Carrier Frequency: VHF High Frequency Steadying: Less Than 0.005% Modulation Mode: FM Audio  Dynamic Range: Over 80 dB  Audio Frequency Response: 40Hz - 18KHz +- 3dB Audio Output level: 0- 300mV  Volume control on each channel (2 control knobs) S/N ratio: Over 70 dB T.H.D. Less than 0.5% Sensitivity: 3uV for 30dB  S/N F/N ratio: over 80 dB  P/N ratio: over 80 dB  Output power: 10mW Receiver Power Source: AC adapter / 110V 60Hz  Range: 150 Feet  Beltpack Transmitter Power Source: 9V battery Handheld Microphone Power Source: 9V battery   TELESCOPIC TRIPOD / STAND for the HISONIC HS6541 PA AMPLIFIER / SPEAKER + POWER AND AUDIO EXTENDED CABLES INCLUDED The telescopic tripod / stand is for the HISONIC HS6541 Amplified PA Speakers. The amplified speaker has a recessed connector on it's bottom designed for this tripod to be inserted into. Extended cables are included to allow the connection of AC power and the 1/4" plug cable into the wireless microphone receiver. By using this stand / tripod the HS6541 can be elevated to the audiences ear level for better sound distribution and distance. $129.95 48 State UPS Ground Shipping/Handling/Insurance - Oversize Boxes No shipments outside of the Continental USA or to PO Boxes Paypal   i000000

Directions

Similar products from Audio Equipment

People who viewed this item also vieved

By clicking "Accept All Cookies", you agree to the storing of cookies on your device to enhance site navigation, analyze site usage, and assist in our marketing efforts.

Accept All Cookies