Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 0

Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 1

Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 2

Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 3

Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 4

Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 5

Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 6

Hobart AirForce 700i Plasma Cutter W/16ft Torch(500546)FREE SHIP NEW SEALED BOX!, US $1,539.59 – Picture 7

Hobart Airforce 700i Plasma Cutter W/16ft Torch(500546)free Ship New Sealed Box!

US $1,539.59

Arlington, Virginia, United States
Mar 7th

Open on mobile:
QR code

THIS SALE IS FOR A BRAND NEW FACTORY FRESH, FACTORY SEALED BOX, NEVER USED, NEVER OPENED, GENUINE HOBART 700i, AIR FORCE 230VOLT PLASMA CUTTER, PART NUMBER=500546. THIS UNIT IS MADE IN THE U.S.A. BY HIGHLY TRAINED TECHNICIANS AT THE HOBART MANUFACTURING FACILITY. This item qualifies for eBay Fast N Free - 1 day handling and free domestic shipping with Fedex Ground/Home OR USPS GROUND, UPS GROUND OR OTHER TRACKABLE CARRIER to the lower 48 USA. AK, HI, PR to pay actual shipping. Hobart 500546 Airforce 700i 230-Volt Plasma Cutter Cuts 3/8- to 5/8-inch steel if powered by an engine-driven welder with a 240-volt generator power outlet of 8,000 watts or more Designed for increased comfort, more efficient cooling, and economical replacement cutting tips Built to withstand tough working environments, rated for 35% duty cycle at 104 degrees Fahrenheit Provides peak performance power under variable input voltage conditions (+/-15%) for steady and cleaner ending cuts Post-flow air cooling cools the torch and tip after cutting, extending life of replaceable tip and electrode Product Description Hobart 500546 Airforce 700i 230-Volt Plasma Cutter AirForce 700i Plasma Cutter The AirForce 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The AirForce 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. High Performance - Serious Cutting Capacity The AirForce 700i has the power to sever cut up to 7/8" thick mild steel. It will also cut stainless steel, aluminum, copper, brass, and other conductive metals (cutting capacities vary depending on material type). Powerful, Lightweight, and Portable The AirForce 700i uses an inverter-based design and reliable technology to pack a lot of performance into a very portable package. Benefits of Plasma Cutting vs. Oxy/Fuel Cuts any conductive metal. Cuts faster than oxy fuel. More precise cut, thinner kerf, less slag to clean up. Smaller heat-affected zone for less warping. No gas pressure settings or flame tuning needed. No preheating of metal prior to cutting. What's Included in the Box? AirForce 700i plasma cutter with 16.5-ft. (5 m) HP-70 hand-held torch, 16.5-ft. (5 m) work cable with clamp, extra consumables (2 electrodes, 2 tips and 1 air fitting), 10-ft. (3 m) power cord with 230V plug, easy-to-connect, built-in gas/air filter and regulator for extra protection, and owners manual. Skill Level: Low AirForce 700i Features: New Inverter Design - Powerful cutting ability at just over half the weight of prior model (AirForce 625). Weighs only 31.4 lbs. Capable with Engine-Driven Welders - Capable of cutting 3/8 to 5/8 in. mild steel when powered by an engine-driven welder with a 240 V generator power outlet of 8 kW or more. New Ergonomic Torch - The new HP-70 torch is designed for increased comfort, more efficient cooling and economical replacement cutting tips. Post-flow Air Cooling - Cools the torch and tip after cutting, extending life of replaceable tip and electrode. Fan-On-Demand - Runs only when needed reducing dust/debris pulled into unit. Wind Tunnel Technology - Prevents abrasive dust and particles from damaging internal components. Thermal Overload Protection - Built to withstand tough working environments. Rated for 35% duty cycle at 104° Fahrenheit. Duty cycle will increase as environmental temperature decreases. Cable Management Strap - Secures torch, work cable and power cord to make transporting easy and convenient. Line Voltage Compensation (LVC) - Provides peak performance power under variable input voltage conditions (±15%) for steady and cleaner ending cuts. Power Factor Correction - Expands operator’s work area via extension cords while minimizing nuisance trips caused by voltage drops. From the Manufacturer Need to cut steel? Thinking about an oxy acetylene cutting torch to do the job? Consider a plasma cutter. This simple technology uses an electrical arc and compressed air to cut steel, aluminum, and other conductive metals. The AirForce 700i is an economical plasma cutting system for all conductive metals. Inverter-based design and reliable technology pack a lot of performance into a very portable package. The Airforce 700i plasma cutting system is excellent for light and heavy industrial users. Automated operations are also well within its range. Unit is compatible with engine-driven welders when powered with a 240 volt generator power outlet of 8,000 watts or more.

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Model	Airforce 700i
Brand	Hobart
MPN	500546
Country/Region of Manufacture	United States
UPC	715959413398