HOBART MG1532 MIXER GRINDER COMMERCIAL HEAVY DUTY 150 LB. CAPACITY EXCELLENT, US $4,599.00 – Picture 0

HOBART MG1532 MIXER GRINDER COMMERCIAL HEAVY DUTY 150 LB. CAPACITY EXCELLENT, US $4,599.00 – Picture 1

HOBART MG1532 MIXER GRINDER COMMERCIAL HEAVY DUTY 150 LB. CAPACITY EXCELLENT, US $4,599.00 – Picture 2

HOBART MG1532 MIXER GRINDER COMMERCIAL HEAVY DUTY 150 LB. CAPACITY EXCELLENT, US $4,599.00 – Picture 3

Hobart Mg1532 Mixer Grinder Commercial Heavy Duty 150 Lb. Capacity Excellent

US $4,599.00

Miami, Florida, United States
Jan 31st

Open on mobile:
QR code

HOBART COMMERCIAL HEAVY DUTY MIXER GRINDER! Model MG1532 Our Price: $4,599.00 List Price: $14,733.95 Other Retailer's Price: $10,500.00 This Unit has a 150 lB. Capacity with Separate Mix and Grind Motors! This Unit Is In Excellent Working Condition This is a Commercial Heavy Duty Hobart Mixer Grinder model MG1532. It has a 7.5 H.P. grind motor, 1H.P. mix motor and an 8-foot length cord. Casters, drain pan and splash shield are standard. Unit is 208volts/60Hz/Ph 3. ELECTRICAL CONTROLS: Electrical controls consist of front mounted water resistant switches, magnetic contacts and dual motor overload protection. An electrical interlock switch is provided. Whenever the hopper lid is opened, power to the motors is shut off. The hopper lid must be in its proper operating position before the motors can be started. CAPACITY: The Mixer-Grinder hopper has meat capacity up to 150 pounds depending on the type of product. The grinding rate is 55 to 60 pounds of fresh boneless beef per minute, first or second cutting through a 1/8" plate; 60 to 65 pounds of pork per minute second cutting through a 3/16" plate. The Unit is for fresh or frozen meat tempered to 26 deg. F.or higher and can be in flake or stick form. GRINDING END: The mixer-grinder is equipped with a “Wedge cylinder” grinding end. This grinding end is sized for #32 knives and plates (included). FEEDING SYSTEM: It is powered by two separate drive systems. A 1 H.P. motor drives the heavy-duty steel mixing arm. The arm rotates at 23 rpm and can easily be removed from the hopper for cleaning. The conveyor screw extends the full length of the hopper and cylinder. The screw rotates at a speed of 216 rpm. By depressing the MIX/GRIND START button both the mixing arm and the screw are operated. Both mixing and grinding are stopped when the STOP switch is depressed. CLEANING: The mixing arm, conveyor screw, cylinder, and conveyor screw drive-shaft seal and mix arm seal are removable from the mixer-grinder for cleaning. FINISH: The mixer-grinder consists of glass bead finished stainless steel hopper, stainless steel panels to enclose the base assembly and motors. The end ring and cylinder are stainless steel. The mixing arm and conveyor screw are tinned. The casters are stainless steel and nickel-chrome plated. This Mixer Grinder Is Excellent For Meats, Pork, Poultry, Veal And Any Application That Requires Fast Cutting And Mixing of Products! This unit is very heavy, so shipping varies based on your location. Please call or e-mail us with your Zip Code in order to quote you a shipping cost based on your location. Once the unit is sold, we need to pack it, pallet the unit and coordinate the delivery. This requires at least one week, no exceptions. The unit will be sent via a freight forwarder / carrier because of its size and weight. Sorry, no pick up is available for this unit. List price of this unit is $17,500.00. It sells at discounts for $10,500.00 We are offering it at a very attractive price, so the first bidder takes it. If you have any questions, please give us a call. This is an excellent unit for many applications. Due to the high fees of credit cards, our margin does not allow us to accept credit card payments for this item. However, your company check is always welcome as well as US postal payment, bank cashier's check or wire transfer. And remember, you can buy with confidence since you are protected by the eBay Buyer Protection Program. 150 pound hopper capacity Double wall construction 7.5 H.P. grind motor and 1 H.P. mix motor Hand removable and interchangeable seals Counterbalanced lid Double-sealed push button control panel with condensate heater Easy access hopper interior and exterior surfaces Brand Hobart Model Mixer Grinder Model Nbr. MG1532 Outside Dimensions H 49" W 27" D 51" Motor H.P. 7.5 H.P. Grind Motor / 1 H.P. Mix Motor Motor rpm 1725 rpm Electrical Specs. 208 Volts / 60Hz / 30 Amps / 3 Phase Weight 1000 lbs. shipping weight Selling On eBay Since 2002! We Have Many Products At Great Prices! IF YOU ARE INTERESTED IN THIS UNIT OR ANY OTHER PRODUCT THAT WE CARRY OR HAVE ANY QUESTIONS PLEASE CALL US AT (813) 398-8000 We sell this type of equipment to United States and Canada only. We have a flat rate shipping and handling fee for each location which may include crating, door to door delivery, a lift gate when required and insurance. Shipping charge is based on your location. Please e-mail or call us first with your Zip Code so we can quote your correct shipping and handling cost. Once the unit is sold, we need to properly pack the unit for shipping. THESE ARE MAINLY LARGE UNITS AND THEY ARE PLACED ON A SCHEDULE TO BE PROPERLY CRATED AND PALLET. THEREFORE, WE REQUIRE AT LEAST ONE WEEK TO PREPARE PRIOR TO SHIPPING. Unit will be sent via a freight forwarder/carrier because of its size and weight. If you are in Canada you need to provide us with your Customs Broker so merchandise can clear the Canadian border. If you do not have a Customs Broker, we can refer you to one that is very reasonable in price. Sorry, no pick up is available for this unit. We accept USPS payments, Bank Cashier's Checks and Company Checks, which need to clear before shipping. We DO NOT accept PERSONAL CHECKS. Once you win one of our items, you need to adhere to our methods of payment. All our products are described to the best of our knowledge. However, there may be a time when a problem may occur. With large units, it may not be worth returning the unit because of the cost of shipping, so instead we will work with you to correct the situation and make you a satisfied customer. We carry a large selection of Food Service Equipment at low prices. Call us with any questions you may have. We have been selling on eBay since 2002! And we continue to be faithful to our customers, even to the most demanding ones, who believe they can actually receive a large commercial unit like the ones we sell, within a very short time. Unfortunately, this cannot happen all the time. We have to properly pack the units for delivery including palleting and strapping them well, and this takes place on a schedule since there may be previously sold units ahead of yours. Once the unit is ready, we arrange pickup with the shipping company. Due to the fuel increase, carriers are consolidating the freight as much as they can to avoid increasing the freight charges more than they have to. This of course, causes delivering delays up to a certain degree. We strive to provide buyers with low prices and low shipping cost, so please be understanding and reasonable on the shipping schedule. Do not leave a negative feedback just because the unit took a bit longer than expected. We will contact you and let you know that your purchase is on it's way. All of our customers are satisfied customers, all our listed equipment has been tested to be in working condition before they go on eBay and once the equipments leave our warehouse for delivery, we expect the shipping company to do their job correctly. So give us a call to discuss your particular needs before buying from us, you will not be disappointed. Call us at (813) 398-8000 email us at: theecellar@yahoo.com

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“Missing the front foot switch storage compartment but foot switch is included.”