HONEYWELL HP312CX 6/12/24 VDC 2.5 AMP POWER SUPPLY ENCLOSURE NIB!, US $60.00 – Picture 0

HONEYWELL HP312CX 6/12/24 VDC 2.5 AMP POWER SUPPLY ENCLOSURE NIB!, US $60.00 – Picture 1

HONEYWELL HP312CX 6/12/24 VDC 2.5 AMP POWER SUPPLY ENCLOSURE NIB!, US $60.00 – Picture 2

Honeywell Hp312cx 6/12/24 Vdc 2.5 Amp Power Supply Enclosure Nib!

US $60.00

Chicopee, Massachusetts, United States
Mar 2nd

Open on mobile:
QR code

Description The HP312CX switching power supplies/charger kit converts low-voltage AC input into 6 VDC or 12 VDC @ 2.5 A of continuous supply current, or 1.0 A @ 24 VDC. This generalpurpose power supply has a wide range of applications for access control, security and CCTV systems that require additional power. For convenient operation, this power supply unit includes the power supply board, a plug-in transformer, steel enclosure, 5 AH/12 V battery, battery leads, and connecting hardware. Benefits • An all-in-one power supply and distribution unit enclosed in a roomy cabinet. • Transformer thermal protection limits damage from overloaded circuits. • LED lights for quick and easy diagnosis, troubleshooting, and status indication. • Enclosure built for durability and product life. • Power disconnect switch makes for easy servicing. • Power cord included; three conductors for ground safety convenience. • Comes in kit form with accessories included for quick installation. • Instantaneous switchover to standby battery (if equipped) when AC fails, maintaining power to all attached devices without intervention. Features and Specifications • Switch selectable 6 VDC/12 VDC/24 VDC. – At 6 VDC or 12 VDC, the output is 2.5 A total; at 24 VDC, the output is 1.0 A total. If a battery charger is used, subtract maximum charge current of 400 mA from total to determine allowable load. • HP312CX includes the power supply (HPS3) and a 24 VAC thermally limited 50 VA plug-in transformer with power LED indicator. – Do not use enclosed battery for 6 VDC output; use a 6 VDC, 5 AH battery (suggested: Powersonic PS-650L). • UL-Listed to UL294 Access Control Systems and UL2044 CCTV Equipment. • Filtered and electronically regulated output. • Built-in charger for sealed lead-acid or gel-type batteries. • Standby specification: – At 6 VDC, unit provides two hours of standby at 2.1 A with a 6 V, 5 AH battery. – At 12 VDC, unit provides two hours of standby at 2.1 A with a 12 V, 5 AH battery. – At 24 VDC, unit provides eight hours of standby at 600 mA with two 12 V, 5 AH batteries. • Automatic switchover to standby battery when AC fails. • Thermally limited design. • Circuit breaker battery protection. • AC input (green) and DC output (red) LED diagnostic indicators. • Hinged cover and vented enclosure with five convenient knockouts. • Temperature range: 32°F to 120°F (0°C to 49°C); indoor use only. • Enclosure dimensions: 10.0" H x 11.5" W x 4.875" D (cm: 25.4 H x 29.21 W x 12.38 D).

Condition:	New: A brand-new, unused, unopened, undamaged item in its original packaging (where packaging is applicable). Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See the seller's listing for full details. ...	Brand	Honeywell
Type	Power Supply
Model	HP312CX
UPC	783008106331