HONEYWELL M7284C1000 SERVO MOTOR ACTUATOR, US $51 – Picture 0

HONEYWELL M7284C1000 SERVO MOTOR ACTUATOR, US $51 – Picture 1

HONEYWELL M7284C1000 SERVO MOTOR ACTUATOR, US $51 – Picture 2

Honeywell M7284c1000 Servo Motor Actuator

US $51

Upper Darby, Pennsylvania, United States
Jan 29th

Open on mobile:
QR code

Product Specifications ApplicationElectricDimensions (in.)6 7/16 in. high x 5 1/2 in. wide x 7 5/16 in. deepDimensions (mm)164 mm high x 140 mm wide x 185 mm deepIncludesTransformer and Screw Terminal AdapterWeight (lb)7.5 lbItem TypeProductMountingFoot-mountedFrequency50 Hz; 60 HzApprovals, Underwriters Laboratories Inc.Listed: File No. E4436, Guide No. XAPX for USA and CanadaElectrical ConnectionsScrew terminalsSupply Voltage120VPower ConsumptionDriving-- 15 VAApprovals, CEEN55011 (Emission) EN50082-2 (Immunity) 73/23/EEC (LVD)Ambient Temperature Range (F)-40 F to +150 FAmbient Temperature Range (C)-40 C to +60 CInternal Auxiliary Switch2Auxiliary Switch RatingsAFL - 120 Vac-- 7.2A; ALR- 120 Vac-- 43.2A; AFL - 240 Vac-- 3.6A; ALR- 240 Vac-- 21.6AStrokeAdjustable; 90 to 160 degrees, SymmetricalShaft Dimensions (in.)0.375 in. SquareControl SignalModulating, 4-20 mAFail Safe ModeNon-Spring ReturnTorque Rating (lb-in.)150 lb-in.Torque Rating (Nm)17 NmExternal Auxiliary Switches AvailableYesShaft Rotation (upon control signal increase)Clockwise (as viewed from power end) (normally closed)Factory Stroke Setting90 degreesTiming, Nominal30-60 secFeedbackNoShaft Dimensions (mm)10 mm SquareMotor shaftsDual-ended shaftDeadweight Load on ShaftEither End-- 200 lbs.; Combined on both Shafts-- 300 lbs.Internal Transformer50004263-002

Condition	Used : An item that has been used previously. The item may have some signs of cosmetic wear, but is fully operational and functions as intended. This item may be a floor model or store return that has been used. See the seller’s listing for full details and description of any imperfections.
Seller Notes	“This item was used and sent out to be refurbished. Item was stored and is in working condition. The company that refurbished it was CAPP USA, they always do a good job. The item was repainted and ready to go.”